• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.1
• /
• pp.113-120
• /
• 2000

In this study, we composed algorithm for DIAL(Differential Absorption Lidar). We investigated the absorption spectrum of $O_3$, $SO_2$ and $NO_2$ dependent on wavelengths using data base UV-Bank and determined the optimized wavelength model. Here, the selected optimal wavelengths are 292.00(${\lambda}_{on}$), 295.20 (${\lambda}_{off}$) for $O_3$, 299.38(${\lambda}_{on}$), 300.05 (${\lambda}_{off}$) for $SO_2$ and 448.00(${\lambda}_{on}$), 449.85(${\lambda}_{off}$) for $NO_2$. In particular, we established the supposed model of DIAL and simulated the error of measuring distance using the selected optimal wavelength. In the model-I with telescope of 300 mm diameter, laser energy of 3 mJ and transmission of 10000 shots, maximum distances are 4 km for $O_3$ measurement and 5 km for $SO_2$ and $NO_2$ measurements. Also, in the model-II with telescope of 600 mm diameter, laser energy of 30 mJ and transmission of 10000 shots, maximum distances are 13 km for $SO_2$ and $NO_2$ measurements.

• Archives of design research
• /
• v.12 no.4
• /
• pp.53-60
• /
• 1999

Nowdays many people using and learning 3D Software. However, like artists drawing by brush, that most of designers misunderstood that 3D Software is cover everything as a tool. This sort of situation, change of 3D Software will come to the front very seriously. It can be result about lack of understanding 3D in general and some kind of illusion about 3D Software. These were changing like training school that was teaching only function for technique. Therefore, to prevent above things, this research paper will be based on a conception, that compare with 3D which called cyber space and the real world. That is explanation of construction about 3D Software generally, that will basis how does people think about the world. It function of 3D Software will take concrete shape gradually, which is after general description and understanding and the users will be quick to understand, no need to difficult of access for beginners. In addition, higher education ay university is no longer training center. Lastly, it will be able to capability as an essentially figure. Nowdays many people using and learning 3D Software. However, like artists drawing by brush, that most of designers misunderstood that 3D Software is cover everything as a tool. This sort of situation, change of 3D Software will come to the front very seriously. It can be result about lack of understanding 3D in general and some kind of illusion about 3D Software. These were changing like training school that was teaching only function for technique. Therefore, to prevent above things, this research paper will be based on a conception, that compare with 3D which called cyber space and the real world. That is explanation of construction about 3D Software generally, that will basis how does people think about the world. If function of 3D Software will take concrete shape gradually, which if after general description and understanding and the users will be quick to understand, no need to difficult of access for beginners. In addition, higher education ay university is no longer training center. Lastly, it will be able to capability as an essentially figure.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.43-52
• /
• 2006

The most important issue the online shopping mall for clothes is facing in the rapid growth of the online shopping mali is the high rate of the return of the goods alter purchase. The high rate of the return leads to the dissatisfaction md lack of trust from the consumers in the online shopping mall for clothes, which in turn leads to the bleak prospect for the online shopping mall for clothes as a result of the consumers' dissatisfaction. Although a type of online shopping mall using the cyber-fitting technology has emerged recently, it has succeeded only in provoking a visual interest, for it is also not satisfying the demand of the consumers by falling short in providing information. Thus, this research seeks for the resolutions of the problems related to the user-oriented online shopping. First of the resolutions is the development of a new prototype which the consumers can easily access; second is the visualization of the information using the 3D virtual-reality of he prototype through interface, which will help the consumers to make more accurate judgments. In other words, this study seeks to provide a type of prototype of an online shopping mall that meets the demand of the consumers using the 3D avatars, unlike the unilateral and conventional malls out there.

• Archives of design research
• /
• v.17 no.1
• /
• pp.231-240
• /
• 2004

Space design in the 21st century has been developed in connection with media more various than ever. In the age of image represented by popular culture, space design connected with media is based on post-reason thoughts constituting the post-modern society, and reflects polysemously and pluralistically changes in the society through the identification of art with life. The movie, which is an image perceived particularly sensibly and the most impractical simulated image among various illusionary media images composing the contemporary society, is growing rapidly in interrelation with various fields of art based on its peculiar nature, and its influence is getting more extensive. The movie manipulates mass society to create what does not exist and restore lost images into new realities through the reproduction of extremely realistic senses, and uses them in establishing virtual realities and creating illusionary images representing the age of simularc. The illusionary expression of the movie produces new meanings through disintegrating existing meanings and recombining them, and expresses popular culture from a position closest to our everyday life. Such an analytical attitude toward the illusionary movie reflecting our society can be a new approach to space design. The present study attempts to suggest the possibility of applying such an illusionary characteristic of the movie as a methodology of space design by utilizing the characteristic as a conceptual language of space design.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.2
• /
• pp.171-186
• /
• 2009

Various Earth-Moon transfer trajectories are designed and analyzed to prepare the future Korea's Lunar missions. Minimum fuel trajectory solutions are obtained for the departure year of 2017, 2020, 2022, and every required mission phases are analyzed from Earth departure to the final lunar mission orbit. N-body equations of motion are formulated which include the gravitational effect of the Sun, Earth and Moon. In addition, accelerations due to geopotential harmonics, Lunar J2 and solar radiation pressures are considered. Impulsive high thrust is assumed as the main thrusting method of spacecraft with launcher capability of KSLV-2 which is planned to be developed. For the method of injecting a spacecraft into a trans Lunar trajectory, both direct shooting from circular parking orbit and shooting from the multiple elliptical intermediate orbits are adapted, and their design results are compared and analyzed. In addition, spacecraft's visibility from Deajeon ground station are constrained to see how they affect the magnitude of TLI(Trans Lunar Injection) maneuver. The results presented in this paper includes launch opportunities, required optimal maneuver characteristics for each mission phase as well as the trajectory characteristics and numerous related parameters. It is confirmed that the final mass of Korean lunar explorer strongly depends onto the initial parking orbit's altitude and launcher's capability, rather than mission start time.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.2 no.4
• /
• pp.175-182
• /
• 2000

Spatial interpolation of daily temperature forecasts and observations issued by public weather services is frequently required to make them applicable to agricultural activities and modeling tasks. In contrast to the long term averages like monthly normals, terrain effects are not considered in most spatial interpolations for short term temperatures. This may cause erroneous results in mountainous regions where the observation network hardly covers full features of the complicated terrain. We developed a spatial interpolation model for daily minimum temperature which combines inverse distance squared weighting and elevation difference correction. This model uses a time dependent function for 'mountain slope lapse rate', which can be derived from regression analyses of the station observations with respect to the geographical and topographical features of the surroundings including the station elevation. We applied this model to interpolation of daily minimum temperature over the mountainous Korean Peninsula using 63 standard weather station data. For the first step, a primitive temperature surface was interpolated by inverse distance squared weighting of the 63 point data. Next, a virtual elevation surface was reconstructed by spatially interpolating the 63 station elevation data and subtracted from the elevation surface of a digital elevation model with 1 km grid spacing to obtain the elevation difference at each grid cell. Final estimates of daily minimum temperature at all the grid cells were obtained by applying the calculated daily lapse rate to the elevation difference and adjusting the inverse distance weighted estimates. Independent, measured data sets from 267 automated weather station locations were used to calculate the estimation errors on 12 dates, randomly selected one for each month in 1999. Analysis of 3 terms of estimation errors (mean error, mean absolute error, and root mean squared error) indicates a substantial improvement over the inverse distance squared weighting.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.6
• /
• pp.568-577
• /
• 2002

The spreading Cocuoainim polykikoides bloom in the southern coastal waters of Korea was simulated using numerical model including the physical processes of water flow and the chemical processes of increasing cell of C. polykikoides by uptake of dissolved nutrients. The circulation of sea water was simulated by two dimensional tide model reflecting the main four tidal components of $M_2,\;S_2,\;K_1,\;O_1$, and permanent current was driven by inflow/outflow across open boundaries. According to the result of model which tidal and permanent current were reflected simultaneously, eastward flows entering the southern waters from the western waters of Korea are dominant but westward flows are weak relatively. These result suggest that it is difficult for initial C. polykikoides bloom generated in the coastal waters of Goheung to move to the western coast of Korea through Jeju Strait. For spreading model of C. poiyhikoides, the range of generating distribution and the generating time of C. polykikoides bloom in coastal area are similar to those of observation data in the field. Wind is the most important factor in moving and distribution of red tide. Permanent current flowing eastward is also considered to be important factor and tidal current was a little influenced.

• Journal of the Korean Society of Safety
• /
• v.11 no.4
• /
• pp.143-150
• /
• 1996

This is an explicit-Implicit, finite element analysis for linear as well as nonlinear hygrothermal stress problems. Additional features, such as moisture diffusion equation, crack element and virtual crack extension(VCE ) method for evaluating J-integral are implemented in this program. The Linear Elastic Fracture Mechanics(LEFM) Theory is employed to estimate the crack driving force under the transient condition for and existing crack. Pores in materials are assumed to be saturated with moisture in the liquid form at the room temperature, which may vaporize as the temperature increases. The vaporization effects on the crack driving force are also studied. The Ideal gas equation is employed to estimate the thermodynamic pressure due to vaporization at each time step after solving basic nodal values. A set of field equations governing the time dependent response of porous media are derived from balance laws based on the mixture theory Darcy's law Is assumed for the fluid flow through the porous media. Perzyna's viscoplastic model incorporating the Von-Mises yield criterion are implemented. The Green-Naghdi stress rate is used for the invariant of stress tensor under superposed rigid body motion. Isotropic elements are used for the spatial discretization and an iterative scheme based on the full newton-Raphson method is used for solving the nonlinear governing equations.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2000.11a
• /
• pp.407-416
• /
• 2000

국방 부문에 종사하는 관리자들은 국방정보시스템 사업관리에 있어서 최신정보기술에 대한 기본적인 사항은 알고있어야 효율적이고 효과적이며 성공적인 사업관리를 진행할 수 있을 것이다. 국방 부문에 종사하는 관리자들이 저비용 고효율의 국방정보시스템을 건설하고 운영 유지관리 하기 위하여 알아야 할 핵심 및 최신정보기술은 크게 인공지능기술, 멀티미디어 정보화 기술, 가상현실 기술, 시뮬레이션 기술, 텔레프레즌스 기술, 나노테크놀로지 기술, 데이터베이스 기술, 병렬처리 기술, 로봇공학 기술, 소프트웨어 공학에 관련된 기술 등이 있다. 그러나 국방부문에 종사하는 정보통신 전문 인력을 제외한 관리자들이 국방관련 사업관리를 수행하면서 정보기술에 대한 이해 수준이 비교적 낮기 때문에 효율적으로 국방사업을 준비, 계획, 추진하기 어려운 실정이다. 따라서 국방부문에 종사하는 관리자들이 정보기술을 알기 쉽게 이해할 수 있도록 국방부문 핵심지능형정보기술 발전 및 군 활용방안을 이해하기 쉽도록 작성하며 효율적인 사업관리가 이루어질 수 있는 방안을 연구하였다. 본 논문은 국방부문핵심 지능정보기술 식별 및 활용방안을 연구하여 핵심적으로 식별된 사항들을 우리 국방부문의 $C^4$I(지휘, 통제, 통신, 컴퓨터시스템)시스템, 내장형 무기시스템, 각종 교육훈련 정보시스템, 자원관리 정보시스템 등에 어떻게 적용할 것이며 적용시 기대효과는 무엇인가를 제시토록 하여 국방부문에 종사하는 관리자들이 각종 국방사업을 조정, 통제, 확인, 감독, 준비/계획하면서 참고하여 저비용 고효율의 국방관련 각층 사업을 관리할 수 있는 능력을 배양시키도록 연구를 수행하였다. 국방관련 각종 사업을 관리할 수 있는 능력을 배양시키도록 연구를 수행하였다. 국방부문 핵심지능정보기술 발전 및 활용 방안에 포함될 주요 내용을 요약하여 제시하였다.의 경향성을 나타내는 오차 주기(error cyc1e)를 이용함으로써 고객들의 수요의 경향성을 좀 더 세밀한 부분까지 파악할 수 있게 해 준다.ction, secondary electron microscopy, atomic force microscoy, $\alpha$-step, Raman scattering spectroscopu, Fourier transform infrared spectroscopy 및 micro hardness tester를 이용하여 기판 bias 전압이 DLC 박막의 특성에 미치는 영향을 조사하였다. 분석결과 본 연구에서 제작된 DLC 박막은 탄소와 수소만으로 구성되어 있으며, 비정질 상태임을 알 수 있었다. 기판 bias 전압의 증가에 따라 박막의 두께가 감소됨을 알 수 있었고, -150V에서는 박막이 거의 만들어지지 않았으며, -200V에서는 기판 표면이 식각되었다. 이것은 기판 bias 전압과 ECR 플라즈마에 의한 이온충돌 효과 때문으로 판단되며, 150V 이하에서는 증착되는 양보다 re-sputtering 되는 양이 더 많을 것으로 생각된다. 기판 bias 전압을 증가시킬수록 플라즈마에 의한 이온충돌 현상이 두드러져 탄소와 결합하고 있던 수소원자들이 떨어져 나가는 탈수소화 (dehydrogenation) 현상을 확인할 수 있었으며, 이것은 C-H 결합에너지가 C-C 결합이나 C=C 결합보다 약하여 수소 원자가 비교적 해리가 잘되므로 이러한 현상이 일어난다고 판단된다. 결합이 끊어진 탄소 원자들은 다른 탄소원자들과 결합하여 3차원적 cross-link를 형성시켜 나가면서 내부 압축응력을 증가시키는 것으로 알려져 있으며, hardness 시험 결과로 이것을 확인할 수 있었다. 그리고 표면거칠기는 기판 bias 전압을 증가시킬수록 더 smooth 해짐을 확인

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3462-3468
• /
• 2015

Regarding countless network disorders or invasions happening nowadays from 2014 until 2015, illegal access intended to attack through the communication line provided by ISP (Internet Service Provider) appears to be the source of the problem. As a defensive way to prevent such network-based attacks, not only stabilization structures for network communication but various policies as well as physical security devices and solutions corresponding to those have been realized and established. Therefore, now is the time to gain foundational research data to secure network security sections by producing logical area on communication bandwidth or such, suggest tasks to expand the communication line which is another research topic in the network security market, and recognize the fact that the active communication bandwidth linkage paradigm using network communication bandwidth is needed as one of the areas that can realize physical security. Additionally, it is necessary to limit the data in the forms of organizing visible security structures into a certain range of physical information by re-dividing communication capacity being currently provided by telecommunicators into subdivided organizational areas and applying the logical virtualization of communication capacity in each of the areas divided. By proposing a network security section based on a logical field application in place of the existing physical structure, basic data that designs a stable physical network communication structure will be provided.