• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.8
• /
• pp.34-40
• /
• 1992

This paper shows a new relational formula of multiplexing gain versus variable input bit rates useful for designing Nx1 ATM(Asynchronous Transfer Mode) multiplexer which mixes several asynchronous bit streams with different transmission rates. The relation between multiplexing gain and input bit stream speeds is derived from the occupied mean lenght(the width per unit time) of cells and the occupation probability of the number of cells at an arbitrary instant when the rates of the periodic cell strams change randomly. And the relation between multiplexing gain and variable bit rates from different number of input bit streams is analyzed accordingly. Under the condition of unlimited multiplexing speed, the more number of input bit streams increases, the bigger the multiplexing gain becomes. While for the case which restricts the multiplexing speed to a limited value, the multiplexing gain becomes smaller contrarily as the number of input bit streams continues too invrease beyond a boundary value. It is shown that for designing an ATM multiplexer according to the latter case, the combination of input bit streams should be determined such as its total bit rate is lower thean, but most apprpaximate to, the multiplexed output speed. Also the general formula evaluating the most significant parameters which should be needed to design the multiplexer is derived.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.12
• /
• pp.1383-1390
• /
• 2007

In this paper, we study an optical add-drop multiplexer which consists of the fiber Bragg grating filter and investigate the temperature characteristics of it. To resolve the characteristics, we find and analyze numerically its temperature response, and fabricate an optical add/drop multiplexer and measure its output spectrum. From the obtained results, they show that the center wavelength of output spectrum shifts approximately 0.01230 nm/$^{\circ}C$ within a temperature range $-30{\sim}90^{\circ}C$.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.2947-2949
• /
• 1999

The MX-13 digital multiplexer for leased line is one of the main facilities, so it is periodically monitored by the operator. Operators connect dummy terminal to the MX-13 digital multiplexer manually, and execute preventing inspection. When alarms occurred, they are manually checked by the operator. But, in order to get mere efficiency of accident prevention and monitoring facilities with rapid response to the accident symptom, and to get higher reliability from the companies who lease communication lines, we need to construct this system which is adequate to monitor IvlX-13 digital multiplexer in almost real time. We construct remote monitoring system for MX-13 digital multiplxer to meet those requirement. After constructing the system, it's possible that the local operator can manage local monitoring system to check the status of MX-13 digital multiplexers. Also, Center operator can monitor the facility which has problems, and located in the specific local areas with the use of Center monitoring system.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.1
• /
• pp.13-19
• /
• 2020

In this paper, we propose a multiplexer based scheme that performs modular AB² multiplication using redundant basis over finite field. Then we propose an efficient multiplexer based semi-systolic AB² multiplier using proposed scheme. We derive a method that allows the multiplexers to perform the operations in the cell of the modular AB² multiplier. The cell of the multiplier is implemented using multiplexers to reduce cell latency. As compared to the existing related structures, the proposed AB² multiplier saves about 80.9%, 61.8%, 61.8%, and 9.5% AT complexity of the multipliers of Liu et al., Lee et al., Ting et al., and Kim-Kim, respectively. Therefore, the proposed multiplier is well suited for VLSI implementation and can be easily applied to various applications.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.8
• /
• pp.22-29
• /
• 2007

A 2.5Gb/s 2:1 multiplexer(MUX) IC using $0.18{\mu}m$ CMOS was designed and fabricated. Inductive peaking technology was used to improve the performance. On-chip micro spiral inductor was designed to maximize the inductive peaking effect without increasing the chip area much. The designed 4.7 nH micro-spiral inductor was $20\times20{\mu}m2$ in size. 2:1 MUX with and without micro spiral inductors were compared. The rise and fall time was improved more than 23% and 3% respectively using the micro spiral inductors for 1.25Gb/s signal. For 2.5 Gb/s signal, fall and rise time was improved 5.3% and 3.5% respectively. It consumed 61mW and voltage output swing was 1$180mV_{p-p}$ at 2.5Gb/s.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10b
• /
• pp.343-345
• /
• 2004

최근 무선 기기 사용자가 급증하고 있다. 이에 따라 교통제어 시스템과 같은 모니터링 및 제어 응용이 무선 기기에서 활발히 사용될 것으로 예상된다. 본 논문에서는 모바일 응용 중 M/VC(Model/View Controller) 응용의 신속한 작성을 지원하는 모바일 M/VC 응용 프레임워크를 소개한다. 모바일 M/VC 응용 프레임워크는 무선 통신 환경에서 클라이언트와 서버 객체의 상호작용을 자동 처리하기 위해, Java의 관찰자/피관찰자(Observer/Observable)를 확장한 모바일 관찰자/피관찰자 패턴과 Multiplexer, Demultiplexer 클래스들을 지원한다. 개발자는 이 프레임워크를 이용하여 Observable과 MobileObserver 클래스들로부터 필요한 객체를 생성한 후, 이들을 Multiplexer와 Demultiplexer 클래스가 생성한 객체에 구성적으로 상호 연결하여 응용을 생성한다. 즉, 개발자는 무선 환경을 고려하지 않고 모바일 M/VC 응용 프레임워크가 제공하는 Multiplexer나 Demultiplexer 클래스의 객체에 무선 관찰자/피관찰자 객체들을 조립식으로 연결함으로써 피관찰자의 상태 변화가 관찰자에게 전달되고, 관찰자를 통한 사용자의 입력이 피관찰자에게 전달되어 반영되는 모바일 응용을 신속하게 생성할 수 있다. 따라서, 모바일 M/VC 응용 프레임워크는 무선 통신 환경하의 컴포넌트 재사용성을 개선하고, 모바일 M/VC 응용의 생산성을 향상시킨다.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.54 no.3
• /
• pp.148-154
• /
• 2005

Various methods for analyze optical components which are necessary before the fabrication of optical circuit component and as its applications, designing method of Wavelength Division Multiplexer(WDM) filter using arrayed-waveguide grating(AWG) is paper. In the case of analyzing uniform optical waveguide, effective index method(EIM), harmonic expansion method are used, and in the case of non-uniform optical waveguide, beam propagation method(BPM) are used. In this paper, to use arrayed-waveguide grating as WDM filter of centered wavelength of $1.55{\mu}m$ and wavelength spacing of 0.8nm, all of the parameter of AWG is calculated by the HEM and the BPM using EIM. As a result of calculation, free spectral range is 12.8nm, focal length $9336.55{\mu}m$, path difference $129.36{\mu}m$ and the number of slab waveguide 91 when the distance of core center to center on row land circle is $20{\mu}m$.

• Current Optics and Photonics
• /
• v.2 no.1
• /
• pp.23-26
• /
• 2018

Optical-layer restoration has been demonstrated with a wavelength-blocker (WB) -based reconfigurable optical add/drop multiplexer (ROADM). Two $2{\times}2$ optical switches with a control circuit were placed before and after a WB-based ROADM to provide automatic path restoration under fiber-failure conditions. Using the proposed node configuration, a 3-node self-healing ring (SHR) network has been implemented to demonstrate the feasibility of the automatic optical-layer restoration. From the results, the restoration time was measured to be ~4 ms under fiber-failure conditions, without any additional power penalty in receiver sensitivity.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.11
• /
• pp.70-75
• /
• 1997

a wavelength division multiplexer based on a polymeric arrayed-waveguide grating has been designed and fabricated. A 4-channel multiplexer with a spacing of 3.2 nm is designe dby using te 2-dimensional beam propagation method. A UV-curable epoxy, NOA73, is used for the core layer, and a passive polymer, PMMA, for the cladding layer. The polymer waveguides are fabricated by the reactive ion etching method and their optical properties are characterized. The fabricted device has a center wavelength of 1548.3 nm, and the wavelength spacing between the channels is 3.2nm. The measured crosstalk is better than -18dB.

• Communications of the Korean Mathematical Society
• /
• v.14 no.2
• /
• pp.405-423
• /
• 1999

We consider a statistical multiplexer model with finite buffer capacity and finite number of independent identical 3-state bursty voice sources. The burstiness of the sources is modeled by describing both two different active periods (at the rate of one packet perslot) and the passive periods during which no packets are generated. Assuming a mixture of two geometric distributions for active period and a geometric distribution for passive period and geometric distribution for passive period, we derive the recursive algorithm for the probability mass function of the buffer contents (in packets). We also obtain loss probability and the distribution of packet delay. Numerical results show that the system performance deteriorates considerably as the variance of the active period increases. Also, we see that the loss probability of 2-state Markov models is less than that of 3-state Markov models.