• 제목/요약/키워드: *-derived sets

검색결과 417건 처리시간 0.023초

마그마관입에 의한 상부퇴적층의 변형에 관한연구 (A Study on the Structural Deformations in the Sedimentary Layer Resulted from Magma Intrusion)

  • 민경덕;김원영
    • 자원환경지질
    • /
    • 제10권1호
    • /
    • pp.37-48
    • /
    • 1977
  • The earth's crust is unceasingly undergoing deformations because of the forces acting upon it. The relationship between the tectonic forces and the resulting deformations are found from the states of stresses in the earth's crust induced by these forces. The study has been attempted to analyze the deformations of the overlying sedimentary layers, which are deformed by the magma intrusion along its lower boundary. The elastic model is constructed to analyze the geologic structures, by means of the theory of elasticity, and then the appropriate boundary conditions are given. The solution of the Airy stress function which satisfies the given boundary conditions is derived from the analytic method. The internal stress distributions of the deformed elastic model layer are portrayed by principal stress trajetories, and then the corresponding potential faults and joints systems are predicted from the Coulomb-Mohr failure criterion. The internal displacement distributions are shown by the calculated displacement components vectors, namely horizontal, vertical and net components. Results of the numerical calculations show the developments of some geologic structures as follows; (1) one set of shear joints and or two sets of shear joints which are oppisite directions, and one set of extension joints parallel to the ${\sigma}_1$ direction, (2) one set of high angle thrusts and normal faults, (3) symmetric fold; both limbs are dipping in opposite direction with low angle. The field work at the Wall-A San area, located near Jinju City, in southern Korea, had accomplished to compare the field structures with the predicted ones. The results of the comparison exhibits the developments of joint and fault systems satisfactorily consistent with each others. But the area does not show any type of folding, in spite of the intrusion of a granodiorite massif, this fact is one of the important features of the whole Kyungsang sedimentary basins of Mesozoic age distributed at the south-eastern parts of Korea. For this reason, it is thought that the magma intrusion had occurred with extremly low pressure. The geologic structures have been modified by the erosion and weathering throughout the geologic time, and the conditions of the sedimentary layers (width, thickness and radius of magma) are not the same as before, being intruded by the magma. To enlighten this, it is preferable to study these geologic structures with analyses of various types of rheological models.

  • PDF

장기관측자료를 이용한 DOAS와 점측정 분석시스템의 바이어스 구조에 대한 평가 (Compatibility of DOAS and Conventional Point Monitoring System Through an Evaluation of Bias Structures Using Long-term Measurement Data in Seoul)

  • 김기현;김민영
    • 한국대기환경학회지
    • /
    • 제17권5호
    • /
    • pp.395-405
    • /
    • 2001
  • To make an assessment of the compatibility between DOAS and conventional point monitoring system (MCSAM-2: MS2), we investigated the concentrations of three criteria pollutants which include S $O_2$, N $O_2$, and $O_3$from a national monitoring station in Seoul during the periods of June 1999~August 2000. The average concentration values for the whole study period derived from hourly concentration data sets of those three species indicated that the mean differences between the two methods can be approximated as 18%. When the bias structure of two systems was evaluated through the computation of percent difference(PD) between the two such as ( $C_{DOAS}$- $C_{conventional}$ $C_{DOAS}$*100, differences between the two systems appeared to be quite systematic among different compounds. While the mode of bias peaked at 0~20% or 20~40% in terms of PD values, the cause of such positive bias mainly arised from generally enhanced concentration values of DOAS system. The structure of bias among different species was further assessed through linear regression analysis. Results of the analysis indicated that the dominant portions of differences observed from two monitoring systems can be accounted for by the systematic differences in their spanning and zeroing systems. S $O_2$(MS2)=0.6385 S $O_2$(DOAS)+2.0985($r^2$=0.7894) N $O_2$(MS2)=0.6548 N $O_2$(DOAS)+7.437($r^2$=0.7687) $O_3$(MS2)=1.0359 $O_3$(DOAS)-7.7885($r^2$=0.7944) The findings of slope values at around 0.64~0.65 from two species suggest that DOAS should respond more sensitively in upper bound concentration range. The offset values apart from zero indicate that more deliberate comparison needs to be made between these monitoring systems. However, based on the existence of strong correlations from at least 8,000 data points for each species of comparison, we were able to conclude that the compatibility of two monitoring systems is highly significant. With the improvement of calibration techniques for the DOAS system. its applicability for routine monitoring of airborne pollutant species is expected to be quite extendable.

  • PDF

정수장 유입조류 전처리를 위한 천연조류제거제(W.H.)의 최적주입농도 결정 (Decision Algorithm of Natural Algae Coagulant Dose to Control Algae from the Influent of Water Works)

  • 장여주;정진홍;임현만;윤영한;안광호;장향연;김원재
    • 대한환경공학회지
    • /
    • 제38권9호
    • /
    • pp.482-496
    • /
    • 2016
  • 하천과 호수의 부영양화로 인하여 남조류가 대량으로 증식하게 되면 고유의 생물독소로 인한 위해뿐만 아니라 정수처리 과정에서 경제적 손실을 야기할 가능성이 있다. 현재 상용화되어있는 천연조류제거제인 M사의 W.H. 응집제(이하 W.H.)는 참나무 유래 성분의 살조 및 타감작용을 이용한 응집.부상공정을 통하여 조류를 사전에 제거함으로써 정수공정에 미치는 영향을 효과적으로 저감할 수 있다. 그러나, W.H.를 활용한 응집 부상공정은 정수처리의 전처리공정으로 적용된 사례가 없기 때문에 최적주입농도의 결정기법에 대한 보고 또한 전무한 실정이다. 본 연구에서는 (1) 한강에서 채취한 복합 조류와 (2) 남조류를 선택적으로 대량 배양하여 광조건 하에서 W.H. 투여량 및 조류농도 등의 여러 조건을 변화시키면서 Jar-test를 시행하여 응집 부상공정에서의 조류의 제거기작을 검토하였다. Jar-test 결과를 바탕으로 IBM-SPSS를 활용한 다중회귀분석을 실시하여 최적 W.H. 주입농도를 결정하기 위한 Chl-a 농도와 탁도를 변수로 하는 두 가지 선형식을 도출하였다. 또한 유입수질의 변동에 따라 W.H. 주입농도를 신속하게 결정하고 자동화할 수 있는 자동제어 로직의 프로토타입(Prototype)을 제시하였다.

해양사고 원인을 분류하기 위한 공통단어의 축소에 관한 연구 (A Study on the Reduction of Common Words to Classify Causes of Marine Accidents)

  • 임정빈
    • 한국항해항만학회지
    • /
    • 제41권3호
    • /
    • pp.109-118
    • /
    • 2017
  • 주제어(key word, KW)는 해양사고의 주요한 원인을 간단하게 표현하기 위한 단어들의 집합으로 해양안전심판원의 심판관들이 작성한다. KW는 심판관들의 서로 다른 주관적인 견해 때문에 일관성 유지가 어렵고, KW의 수가 너무 많은 문제점이 있다. 이러한 문제를 해결하기 위해서는 최적화된 최소의 공통단어(common word, CW)를 이용한 체계적인 KW 구축 프레임이 필요하다. 본 연구의 목적은 체계적인 KW 구축 프레임 개발에 필요한 CW을 도출하는데 있다. 이러한 목적을 달성하기 위하여 본 연구에서는 파레토(Pareto) 분포함수와 파레토 지수를 이용한 최적의 최소 CW 도출방법을 제안하였다. 총 2,642개의 KW을 수집한 후, 수집한 KW의 세부 단어와 이들의 빈도를 갖는 데이터 세트에서 총 56개의 특징적인 CW를 식별하였다. 56개의 특징적인 CW를 이용한 단어 축소실험을 통해서 평균 58.5%의 축소율을 획득하였고, 축소율에 따라서 추정한 CW는 파레토 차트로 검증하였다. 이를 통해서 체계적인 KW 구축 프레임 개발이 가능할 것으로 기대된다.

축소모델을 통한 고속철도 차량의 진동특성 해석 및 검증 (Analysis of the Vibration Characteristics of a High-Speed Train using a Scale Model)

  • 한재현;김태민;김정태
    • 한국철도학회논문집
    • /
    • 제16권1호
    • /
    • pp.7-13
    • /
    • 2013
  • 철도차량의 실차 규모 동특성시험은 설비 구축, 대차의 제작 및 시험 조건의 설정등과 관련하여 비용, 시간 등의 증대로 많은 어려움이 따른다. 본 연구에서는 실험실 환경에서 차량 진동문제와 안전성을 평가하기 위한 목적으로 축소모델을 제작하고, 개발된 축소모델이 해당 철도차량의 동특성을 정밀하게 모사하는지를 검증하는 평가방법에 대한 연구를 수행하였다. 축소이론은 Jaschinski 상사기법의 이론을 적용하였으며, 1/10 축소모델을 구축하였다. 본 연구에서는 축소 대차의 상하 진동에 초점을 맞혀 시스템을 제작하였다. 시스템은 구동부, 보기, 대차 등 3개의 하부구조로 구성되었으며, 실제 차량으로 환산 시 400km/hr까지 실험가능 하도록 목표로 하였다. 축소 대차의 설계 및 제작과 함께, 동역학해석 프로그램인 ADAMS/View를 이용하여 고유치 해석을 수행하였다. 전산해석으로 도출된 고유진동수는 실험결과와 비교 분석되었다. 시스템이 가지고 있는 초기 5개의 자유도에 상응한 고유진동수를 비교한 결과, 개발된 상사 이론에 따른 축소모형은 충분한 신뢰성을 확보한 것으로 검증되었다. 본 연구에서 개발된 축소모델은 대학실험실에서 차량진동모드를 모사하는 용도로 기획되었으나, 추후 자유도의 추가보완을 통해 고속철도 차량의 대차와 보기구조 동특성 해석에 활용될 수 있을 것으로 판단된다.

생물활성탄을 이용한 Linear Alkyl Sulfate함유 원수에서의 질산화에 관한 연구 (A Study on Nitrification of Raw Waters Containing Linear Alkyl Sulfate in Biological Activated Carbon)

  • 박성순;장지수;유명진
    • 상하수도학회지
    • /
    • 제9권3호
    • /
    • pp.116-126
    • /
    • 1995
  • The purpose of this study was to investigate the removal of ammonium nitrogen by biological nitrification in raw water containing LAS using BAC. At batch teats, LAS removal by ozone followed the first order reaction, and the rate constants(k) by ozone dose 1, 3mg/min.L were $0.040min^{-1}$, $0.062min^{-1}$ respectively. Therefore, the more ozone was dosed, the higher LAS was removed The reaction between ozone and ammonium nitrogen also followed the first order, and rate constants(k) at pH7,8 and 9 were $8.9{\times}10^{-4}min-1$, $3.8{\times}10^{-3}min^{-1}$, and $2.9{\times}10^{-2}min^{-1}$ respectively at ozone dose of 3mg/min.L . Therefore, ammonium nitrogen was little removed by ozone under neutral pH of 7. The continuous flow apparatus had four sets composed of a ozone contacter and a GAC column. Through continuous filtration test for 50days, the following conclusions were derived; (1) LAS was removed 23%, 30% respectively by ozone dose 1, 3mg/L, and was not detected in all column effluents during the period of experiment. Therefore, it appeared that adsorption capacities of each column still remained. (2) Ammonium nitrogen concentration after ozone contact varied little in raw Water because pH of raw water was from 6 to 7, and was transfered to nitrite and nitrate within GAC columns as the result of staged nitrification. After 30days, nitrite was not detected in all column effluents due to biological equilbrium between nitro semonas and nitrobacter Average removals of ammonium nitrogen in each column after the lapse of 30days were the following; ${\cdot}$ column A (ozone dose 3mg/L, EBCT 9.5min): about 100% ${\cdot}$ column B (ozone dose 1mg/L, EBCT 9.5min): 91% ${\cdot}$ column C (ozone dose 3mg/L, EBCT 14.2min): about 100% ${\cdot}$ column D (ozone dose 0mg/L, EBCT 9.5min): 53% Though column A and C reached nitrification of about 100%, column C (longer EBCT than column A) was more stable than column A. (3) After backwash, nitrification reached steady state within 5 to 8 hours. Therefore, nitrification was not greatly affected by backwash. (4) According to the nitrification capacity in depth of column A, C, where 100% nitrification occured. LAS was removed within 20cm, while ammonium nitrogen required more depth to be removed by nitrification.

  • PDF

포아송 클러스터 가상강우생성 웹 어플리케이션 개발 및 검증 - 우리나라에 대해서 (Development and validation of poisson cluster stochastic rainfall generation web application across South Korea)

  • 한재문;김동균
    • 한국수자원학회논문집
    • /
    • 제49권4호
    • /
    • pp.335-346
    • /
    • 2016
  • 본 연구에서는 포아송 클러스터 강우생성모형의 하나인 MBLRP 모형의 매개변수지도를 우리나라에 대하여 제작하고 이에 기반을 둔 가상강우생성 웹 어플리케이션을 개발 및 검증하였다. 이를 위하여 우리나라의 62개 ASOS 지상 강우 관측소에서 관측된 강우자료를 기반으로 서로 다른 수문모의의 목적(홍수량 모의, 장기 유출량 모의, 일반 모의)에 따른 MBLRP 모형의 매개변수지도를 산정한 후, 이를 Ordinary Kriging 기법을 통해 공간 보간하여 우리나라에 대한 매개변수지도를 제작하였으며, 이에 기반을 두고 가상강우 시계열을 생성하는 웹 어플리케이션을 개발하였다. 검증을 위하여 웹어플리케이션을 사용하여 가상강우를 생성한 후 평균, 분산, 자기상관계수, 무강우 확률, 극한강우량 및 다양한 유역에 대한 극한홍수량과 유출량을 계산하고 이를 관측 강우에 근거하여 산출된 값과 비교하였다. 비교 결과 가상 강우의 각종 통계값은 관측강우에 근거한 값과 매우 유사하게 나타났으나, 극한강우와 극한홍수는 관측치에 근거한 값과 비교하여 16%-40% 정도 과소산정되는 경향을 보였다. 이러한 결과는 교정계수로 활용할 수 있도록 등고선도의 형태로 제공되었다. 본 연구에서 개발한 웹 어플리케이션은 모형의 매개변수 산정부터 가상 강우 시계열 생성까지 일련의 과정을 포함하고 있어 강우자료를 필요로 하는 다양한 수문 분석에 활발히 활용될 것으로 기대된다.

비선형 탄성파 파동장 역산 방법에서 탄성파 변수 세트에 관한 정보의 수치적 연구 (Numerical studies of information about elastic parameter sets in non-linear elastic wavefield inversion schemes)

  • 주정 명남
    • 지구물리와물리탐사
    • /
    • 제10권1호
    • /
    • pp.1-18
    • /
    • 2007
  • 비선형 파동장 역산은 지하의 암석과 물성을 결정하는 물리적인 제약을 위한 탄성파 변수들을 평가하는데 강력한 방법이다. 이 논문에서는 현장자료와 2 차원 탄성파 속도 모델로부터 탄성파 속도 변화를 재구성하여 만들어낸 6 가지 탄성파 속도 모드를 제시하였다. 탄성파 반사파 자료의 정보는 종종 단파장과 장파장 성분으로 나뉘어진다. 지역검색 방법은 만약 초기모델이 실제 모델로부터 동떨어지면 장파장의 속도 변화를 측정하는데 어렵다. 그러면 송신주파수들은 낮은 대역에서 더 높은 대역들로 모델의 탄성파 변수들을 측정하기 위해 변환된다 (frequency-cascade scheme) 탄성파 변수들은 P 파와 S 파 속도가 섬도에 따라 선형으로 변화는 초기 모델 가정하에 각 역산단계에서 (simultaneous mode) 계산된다. P 파와 S 파 속도 $('V_P\;V_S\;mode')$, P 파 임피던스와 포와송 비 $('I_P\;Poisson\;mode')$, P 파와 S 파 임피던스 $('I_P\;I_S\;mode')$와 같은 세가지 모드들이 탄성파 변수들의 역산을 위해 얻어진다. 각 탄성파 역산 단계에서 밀도값들은 세가지 가정하에 개선(update)된다. 탄성파 모델을 위한 각 변수 세트들에서 역산의 정확도를 평가한 결과 $V_P\;V_S$ 모드와 $I_P$ Poisson 모드 사이에 별다른 역산 차이는 없었다. $I_P\;I_S$ 모드들에 대해서도 같은 결론이 예상된다. 이러한 결과들은 전 파장에 걸친 탄성파 파동장 역산의 견고한 기초를 제공한다.

차세대 염기서열 분석을 이용한 굴참나무(Quercus variabilis)의 microsatellite 마커 개발 및 특성 분석 (Identification and Characterization of Polymorphic Microsatellite Loci using Next Generation Sequencing in Quercus variabilis)

  • 백승훈;이제완;홍경낙;이석우;안지영;이민우
    • 한국산림과학회지
    • /
    • 제105권2호
    • /
    • pp.186-192
    • /
    • 2016
  • 본 연구는 차세대 염기서열 분석방법을 이용하여 굴참나무의 microsatellite 마커를 개발하고 특성을 분석하기 위해 수행되었다. GS-FLX Titanium 차세대 염기서열 분석 장비를 이용하여 305,771개의 read를 얻었고, 117 Mbp의 데이터를 생산하였다. De novo assembly를 통하여 7,326개의 contig를 확보하였다. 크기가 500 bp 이상이 되는 contig는 2,921개로 나타났다. 그 중 microsatellite 영역을 포함하는 contig는 606개(20.75%)로 나타났으며, 총 microsatellite의 수는 911개로 확인되었다. 그 중 13개의 microsatellite 유전자좌에서 굴참나무 개체 간 다형성이 관찰되었다. 이들 microsatellite 유전자좌에 대하여 주왕산 집단에서 관찰된 유효 대립유전자수($A_e$)는 평균 4.966(2.439~7.515)로 나타났다. 평균 이형접합도 관측치($H_o$)와 평균 이형접합도 기대치($H_e$)는 각각 0.873(0.731~1.000)과 0.766(0.590~0.867)으로 나타났다. 다형성이 관찰된 모든 microsatellite 유전자좌에서 null 대립유전자는 관찰되지 않았으며, 마커 간 연관불평형은 나타나지 않았다. 따라서 본 연구에서 개발된 13개의 microsatellite 마커는 굴참나무 집단의 유전변이 분석에 유용할 것으로 사료된다.

복식미를 보는 시(視)형식 개발 (The Development of Perspectives for Viewing the Aesthetics of Costume)

  • 신주영;김민자
    • 복식
    • /
    • 제58권7호
    • /
    • pp.76-91
    • /
    • 2008
  • The purpose of this study is to prescribe formative perspectives as a framework where the aesthetic taste and demands of a certain period are embodied and to develop new analytical tools to examine the beauty of dress in terms of form. First, the theoretical tools selected for this study are Heinrich Wolfflin's formative perspective theory derived from art and Marilyn R. DeLong's framework for visual analysis of dress. Second, several issues that limited the development of a new framework for analyzing the form of dress were identified and addressed. Third, the selected aspects of dress form to be analyzed are specified. They are: silhouette, inner form, structure form, materials and patterns based upon the relationship between the body, dress and space in order to develop new formative perspectives. Based upon these theories a new framework for analyzing dress aesthetics in terms of form is developed. This reconstructed framework consists of three sets of antagonistic representational styles: closed form/open form, linear form/painterly form and multiplicity/unity. Closed form/open form represented in dress can be classified by the clear or obscure silhouette shown not only in the relationship between the dress and space around the dress, but also from changeability or invariability of dress in relation to the body. The material, pattern and various design elements are used as the central criteria to determine the linear/painterly characteristics in dress representations. Finally, the multiplicity/unity can be found in the relationship between the whole and the parts. Multiplicity is represented in dress when the parts have a visual priority over the whole, whereas unity is represented when a dress as a whole has visual priority over the parts. A dress represented with closed form, linear characteristic and multiplicity is perceived as a clear form. In contrast, a dress with open form, painterly characteristic and unity is understood to be an obscure form. It can be said that this study is the first attempt to establish the formative perspectives for analyzing the form of dress in various periods, cultures and races for the future studies.