• 한국정밀공학회지
• /
• 제12권10호
• /
• pp.40-49
• /
• 1995

This paper presents the performance and problems in analysis method and testing system of Electronic Speckle Pattern Interferometry (ESPI) method, in measuring two - dimensional in-plane displacement. The anyalysis result of measurement by ESPE is quite comparable to that tof measurement by strain gauge method. This implies that the method of ESPE is a very effective tool in non-contact two-dimensional in-plane strain analysis. But there is a controversal point, measurment error. This error is discussed to be affected not by ESPE method itself, but by its analysis scheme of the interference fringe, where the first-order interpolation has been applied to the points of strain measured. In this case, it is turned out that the more errors would be occurred in the large interval of fringe. And so this paper describes a computer method for drawing when the height is available only for some arbitrary collection of points. The method is based on a distance-weighted, last- squares approximation technique with the weight varying with the distance of the data points.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권12호
• /
• pp.3180-3199
• /
• 2013

While non-predefined object segmentation (NDOS) distinguishes an arbitrary self-assumed object from its background, predefined object segmentation (DOS) pre-specifies the target object. In this paper, a new and novel method to segment predefined objects is presented, by globally optimizing an orientation-based objective function that measures the fitness of the object boundary, in a discretized parameter space. A specific object is explicitly described by normalized discrete sets of boundary points and corresponding normal vectors with respect to its plane shape. The orientation factor provides robust distinctness for target objects. By considering the order of transformation elements, and their dependency on the derived over-segmentation outcome, the domain of translations and scales is efficiently discretized. A branch and bound algorithm is used to determine the transformation parameters of a shape model corresponding to a target object in an image. The results tested on the PASCAL dataset show a considerable achievement in solving complex backgrounds and unclear boundary images.

• 비파괴검사학회지
• /
• 제31권6호
• /
• pp.609-615
• /
• 2011

Excitation and propagation of electromagnetic field of a cylindrical coil above an arbitrary number of conductive plates for pulsed eddy current testing(PECT) are very complex problems due to their complicated physical properties. In this paper, analytical modeling of PECT is established by Fourier series based on truncated region eigenfunction expansion(TREE) method for a single air-cored coil above stratified conductive structures(SCS) to investigate their integrity. From the presented expression of PECT, the coil impedance due to SCS is calculated based on analytical approach using the generalized reflection coefficient in series form. Then the multilayered structures manufactured by non-ferromagnetic (STS301L) and ferromagnetic materials (SS400) are investigated by the developed PECT model. Good prediction of analytical model of PECT not only contributes to the development of an efficient solver but also can be applied to optimize the conditions of experimental setup in PECT.

• 센서학회지
• /
• 제10권5호
• /
• pp.286-291
• /
• 2001

논문에서는 임의의 시각계에서 인간과 유사한 시각 응시점을 선택하기 위한 Saliency map 모델을 제안한다. 제안하는 모델은 영상의 에지 정보를 시각 응시점 결정을 위한 특징 기저로 이용한다. 자연 정지 흑백 영상에서 상호 독립적인 에지 성분들을 찾는데 가장 좋은 방법이라고 알려진 독립성분해석 방법을 이용한다. 인간 시각계에서 시각 수용체의 비균일 분포를 고려하기 위해 카메라와 같은 시각 센서로 받은 영상을 직접 이용하는 대신에 입력 영상으로 다중 해상도를 갖는 계층 영상을 이용한다. 컴퓨터를 이용한 시뮬레이션으로부터 제안한 Saliency map을 이용하여 주어진 임의의 이미지에 대한 시각 응시점을 구한다.

• 한국항공우주학회지
• /
• 제30권6호
• /
• pp.39-45
• /
• 2002

본 논문에서는 복합재의 3차원 경화 수치모사를 위해 유한요소 정식과정을 제시하였다. 이 정식을 기초로 하여 유한요소 프로그램을 개발하였다. 개발한 프로그램을 검증하기 위해 참고문헌에 제시된 수치예제에 대한 해석을 수행하였다. 본 논문에서의 경화 수치모사결과가 측정된 경화온도와 잘 일치하였다. 본 3차원 경화 수치모사에서는 1, 2차원 해석과는 달리 복합재 구조물의 임의 지점에서의 수치모사 결과분석이 가능하다. 개발된 유한요소 프로그램을 이용하면 불규칙한 형상을 가진 복합재 구조물과 일정하지 않은 오토클레이브 내부 온도분포 하에서의 경화 수치모사를 할 수 있다.

• ETRI Journal
• /
• 제38권6호
• /
• pp.1042-1051
• /
• 2016

The mobile hotspot network (MHN), which is capable of providing a data rate of gigabits per second at high speed, is considered a potential use case of the future enhanced mobile broadband for 5G. Because a unidirectional network deployment has been considered for an MHN, non-orthogonal multiple access (NOMA) can be employed to improve the system performance. For a practical implementation of NOMA under an MHN highway scenario where multiple pieces of MHN terminal equipment are served through the same beam simultaneously, a NOMA transceiver is proposed in this paper. For the NOMA transmitter, Gray-coded QAM constellation mapping is extended to arbitrary modulation order q. For the NOMA receiver, successive interference cancellation (SIC) is no longer necessary, and instead, a parallel demodulation is proposed. The numerical and simulation results suggest that the proposed NOMA transceiver outperforms the conventional NOMA SIC receiver and can be flexibly used for an MHN highway scenario.

• Composites Research
• /
• 제28권4호
• /
• pp.204-211
• /
• 2015

본 논문에서는 블레이드와 같이 세장비가 크고 초기 비틀림이 존재하는 복합재료로 구성된 날개 구조물에 대한 이차원 단면의 차원축소와 복원관계를 이론적으로 기술하고 이를 이용한 복합재료 로터 블레이드의 효율적인 설계 과정을 기술하였다. 차원축소와 복원해석 수치해석 프로그램인 VABS를 이용하여 단면해석을 수행하고 연성이 고려된 강성행렬과 질량행렬을 중립점에 연결하여 블레이드의 특성을 포함한 1차원 보 모델링을 구성하였다. 1차원 보 모델을 통해 블레이드의 거동을 확인하고 내부하중을 계산하여 단면위치에서 변형률 복원을 수치적으로 계산하고 이산화 된 단면에 수치적으로 매칭하여 시각적으로 형상화하였다.

• 한국통신학회논문지
• /
• 제35권1A호
• /
• pp.1-9
• /
• 2010

본 논문을 통해 i.n.d 레일리 패이딩 체널에서 서로 다른 변조/복조 기법을 사용하는 중계기들로 구성된 선택적 복호 후 재전송 네트워크의 성능평가를 보여준다. 본 논문은 i.i.d와 i.n.d 레일리 패이딩 채널 모두에서 선택적 복호 후 전송 프로토콜이 최대 다이버시티를 얻을 수 있다는 것을 보여준다. 또한 SC(selection combining)기법을 사용하는 시스템과 MRC(maximal ratio combining)기법을 사용하는 시스템의 성능을 비교하여 결합기술의 효과를 연구하였다. 높은 SNR에서 시뮬레이션 결과와 수식적 분석 결과가 정확하게 일치하는 것을 보여준다.

• 제어로봇시스템학회논문지
• /
• 제8권2호
• /
• pp.142-150
• /
• 2002

This paper presents a systematic method of the zigzag gait planning for quadruped walking robots. When a robot walks with a zigzag gait, its body is allowed to move from side to side, while the body movement is restricted along a moving direction in conventional continuous gaits. The zigzag movement of the body is effective to improve the gait stability margin. To plan a zigzag gait in a systematic way, the relationship between the center of gravity(COG) and the stability margin is firstly investigated. Then, new geometrical method is introduced to plan a sequence of the body movement which guarantees a maximum stability margin as well as monotonicity along a moving direction. Finally, an optimal swing-leg sequence is chosen for a given arbitrary configuration of the robot. To verify the proposed method, computer simulations have been performed for both cases of a periodic gait and a non-periodic gait.

• Steel and Composite Structures
• /
• 제18권3호
• /
• pp.659-672
• /
• 2015

This research deals with the analytical solution of a curved beam with different shapes made of functionally graded materials (FGM's). It was assumed that modulus of elasticity is graded along the thickness direction of curved beam based on a power function. The beam was loaded under pure bending. Using the linear theory of elasticity, the general relation for radial distribution of radial and circumferential stresses of arbitrary cross section was derived. The effect of nonhomogeneity was considered on the radial distribution of circumferential stress. This behavior can be investigated for positive and negative values of nonhomogeneity index. The novelty of this study is application of the obtained results for different combination of material properties and cross sections. Achieved results indicate that employing different nonhomogeneity index and selection of various types of cross sections (rectangular, triangular or circular) can control the distribution of radial and circumferential stresses as designer want and propose new solutions by these options. Increasing the nonhomogeneity index for positive or negative values of nonhomogeneity index and for various cross sections presents different behaviors along the thickness direction. In order to validate the present research, the results of this research can be compared with previous result for reachable cross sections and non homogeneity index.