• Journal of Korea Water Resources Association
• /
• v.41 no.3
• /
• pp.305-314
• /
• 2008

Urban sewer systems are designed to operate in open-channel flow regime and energy loss at circular manholes are usually not significant. However, the energy loss at manholes, often exceeding the friction loss of pipes under surcharge flow, is considered as one of the major causes of inundation in urban area. Therefore, it is necessary to analyze the head loss associated with manholes, especially in surcharge flow. Hydraulic experimental apparatus which can be changed the invert type(CASE A, B, C) and step height(CASE I, II, III) was installed for this study. The range of the experimental discharges were from $1.0{\ell}/sec$ to $5.6\;{\ell}/sec$. As the manhole diameter ratio($D_m/D_{in}$) increases, head loss coefficient increases due to strong horizontal swirl motion. Head loss coefficient was maximum because of strong oscillation of water surface when the range of manhole depth ratios($h_m/D_{in}$) were from 1.0 to 1.5. The average head loss coefficients for CASE A, B, and C were 0.45, 0.37, and 0.30, respectively. Accordingly, U-invert is most effective for energy loss reduction at circular manhole. This head loss coefficients could be available to design the urban sewer system with surcharge flow.

• Journal of Korea Foundry Society
• /
• v.26 no.1
• /
• pp.17-26
• /
• 2006

The substitution of cooling method from water quenching to air cooling after solution heat treatment was aimed for the development of a convenient and economical heat treatment process of duplex stainless steels without deterioration of mechanical and corrosion resistant properties for the industry. In order to achieve this goal, the mechanical properties and corrosion properties of a ASTM A890-4A duplex stainless steel were systematically investigated as functions of casting condition and cooling method after solution heat treatment. A 3-stepped sand mold and a permanent Y-block mold were used to check the effects of solidification structure and cooling rate after solution heat treatment. The microstructural characteristics such as the ferrite/austenite phase ratio and the precipitation behavior of ${\sigma}$ phase and carbides were investigated by combined analysis of OM and SEM-EDX with an aid of TTT diagram. Hardness and tension test were performed to evaluate the mechanical properties. Impact property at $-40^{\circ}C$ and corrosion resistance were also examined to check the possibility of the industrial application of this basic study. Throughout this investigation, air-cooling method was proved to effectively substitute for water-quenching process after the solution heat treatment, when the duplex stainless steel was sand mold cast with a thickness below 15 mm or permanent mold cast with a thickness below 20 mm.

• Land and Housing Review
• /
• v.3 no.3
• /
• pp.299-305
• /
• 2012

Various types of bio wood chip for fermentation-extinction of food waste was investigated by comparing their different pore structure with the performance of weight loss rate and microbial activity. The fermentation-extinction of food waste with bio wood chip was examined by adding 700~1,500g of food waste every day during 15 days to the fermentation-extinction reactor with condition of $30{\sim}50^{\circ}C$ temperature and 30~70% humidity, where 1,500g of bio wood chips were existed. The bio wood chips used in this experiment were categorized into 4 different types; microbial-mixing type(A biochip), macro pore type(B biochip) under $2{\mu}m$ of pore size, micro pore type of wood-chips(C biochip) under $0.1{\mu}m$ of pore size, viscous & sticky type(D biochip). As a result, A, B, C, D bio wood chip exhibited 85%, 63%, 92%, 73% weight loss of food waste with fermentation-extinction. The maximum weight loss of food waste was obtained at the fermentation-extinction experiments by using C bio wood chip. On the other hands, the maximum ratio of ATP to COD and TN was obtained from $3.00{\times}10^{-10}$ and $2.31{\times}10^{-11}$ in the case of C bio wood chip, comparing with other types of bio wood chip. Consequently, the performance of weight loss rate was affected with the micro pore structure of bio wood chip which have an advantage of extensive microbial activity space in the fermentation-extinction of food waste.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.12
• /
• pp.1957-1964
• /
• 2020

Objective: The aim of this study was to compare overfeeding performance, fatty acid composition, blood chemistry, enzymes and genes expression overfed Xupu and Landes geese. Methods: Sixty male Xupu geese (80 d) and Landes geese (80 d) were selected. After a period of one-week of pre-overfeeding, Xupu and Landes geese were overfed three meals of 550 and 350 g/d, respectively, of a high-carbohydrate diet in the first week of the overfeeding period. The next week, geese were given four meals of 1,200 and 850 g/d, respectively, over 8 to 14 d. Finally, geese were given five meals of 1,600 and 1,350 g/d, respectively, for the last two weeks. Results: After overfeeding for 28 d: Compared with Landes geese, Xupu geese liver weight and liver-to-body weight ratio decreased (p<0.05), while final weight, slaughter weight, total weight gain, abdominal fat weight, and feed-to-liver weight ratio increased (p<0.05). The levels of elaidic acid (C18:1t9), oleic acid (C18:1n-9), eicosenoic acid, and arachidonic acid in the liver of Xupu geese significantly increased (p<0.05), and the levels of myristic acid and stearic acid significantly decreased (p<0.05), while methyleicosanoate acid significantly increased (p<0.05). Xupu geese had higher plasma concentrations of triglyceride and very low density lipoprotein cholesterol (p<0.05), and decreased activities of alanine aminotransferase, aspartate aminotransferase, and lipase (LPS) (p<0.05). Landes geese had higher LPS activity (p<0.05), but lower cholinesterase activity (p<0.05) when compared with Xupu geese. The mRNA expression levels of fatty acid dehydrogenase (FADS) gene, elongase of long-chain fatty acid 1 (ELOVL1) gene, ELOVL5, and acyl-Co A: cholesterol acyltransferase 2 (ACAT2) gene were significantly upregulated (p<0.05) in Landes goose when compared with Xupu geese. Conclusion: This study demonstrates that the liver production performance of Landes geese was better than that of Xupu geese to some extent, which may be closely related to LPS activity, as well as the expression of FADS, ELOVL1, ELOVL5, and ACAT2.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.9
• /
• pp.1255-1262
• /
• 2000

A total of 80 pigs ($5.68{\pm}0.61kg$ BW; 21 d of age) were used to evaluate the effect of fat sources in weaned pigs. Pigs were allotted into five treatments based on body weight, in a completely randomized block design. Treatments consisted of diets representing different ratio between soy oil or corn oil and tallow; 1) S100 (soy oil 100%), 2) S75 (soy oil:tallow=75:25), 3) S50 (soy oil:tallow=50:50), 4) C75 (corn oil:tallow=75:25), 5) C50 (corn oil:tallow=50:50). During d 0 to 14, pigs were fed diets containing 3,400 kcal ME, 23% crude protein, 1.65 % lysine and for the period of d 15 to 28, pigs were fed diets supplying 3,400 kcal ME, 20.5% crude protein, 1.355% lysine. For d 0 to 14, a significant differences in ADG and ADFI were observed among treatments, pigs fed animal-vegetable fat blends gained more than pigs fed the S100. As tallow addition was increased from 25% to 50% replacing soy or corn oil, ADG was improved from 6.32% to 28.38%. In phase II (d 15 to 28) period, ADG, ADFI and FCR were not significantly different among treatments. For overall period (d 0 to 28), pigs fed 50% animal:50% vegetable fat blends diets consumed more feed and grew faster than pigs fed control diet and 75% vegetable oil:25% tallow groups, but the differences was not significant among treatments. Apparent DM, CP and fat digestibility were increased with time postweaning for each treatment. There were no differences in digestibilities of total amino acid during overall period. The combination of soy oil or corn oil with tallow produced slightly higher serum triglycerides (TG) and total cholesterol (TC) combination compared with the soy oil alone. In conclusion, tallow:soy (or corn) oil blends diets improved growth rate and the ratio of 50% tallow plus 50% soy (or corn) oil blends diets were favorable for growth and nutrient digestibilities of weaned pigs.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.9
• /
• pp.1086-1093
• /
• 2011

To fabricate the aluminum alloys with good drawability, the textures evolution of the AA5182 sheets due to the change of lid parameter after rolling and subsequent annealing was studied. The measurement of the deformation textures was carried out for the sheets with high reduction ratio and the change of the recrystallization texture was investigated after heat-treatments of the rolled sheets in various I/d parameters. Rolling without lubrication and subsequent annealing led to the formation of favorable rot-$C_{ND}$ {001}<110> and ${\gamma}$-fiber ND//<111> textures in AA5182 sheets. From the results, the ${\gamma}$-fiber ND//<111> component well evolved during rolling at high lid parameter of 6.77. The initial shear deformation texture, especially, ${\gamma}$-fiber ND//<111> was not rotated during heat treatment in holding time of 180~7,200 seconds on AA5182 with I/d parameter of 6.77. Therefore, the AA5182 sheets were fabricated by controlling I/d parameter having well evolved ${\gamma}$-fiber ND//<111> which was advantageous in good drawability of the sheets.

• Journal of Pharmaceutical Investigation
• /
• v.18 no.1
• /
• pp.15-21
• /
• 1988

An inclusion complex of phenytoin (PT) with ${\beta}-cyclodextrin\;({\beta}-CyD)$ in molar ratio of 1 : 1 was prepared, and the interaction between host and guest molecules was confirmed by infrared spectrometry, differential scanning calorimetry and X-ray diffractometry. Suppositories were prepared by the fusion method. PT and $PT-{\beta}-CyD$ complex were added to PEG 1540 and Witepsol H-15 under the vigorous stirring at $40^{\circ}C$. Content uniformity was tested for different formulations of the PT suppositories. The release rates were dependent on the K.P. V dissolution apparatus and the dialyzing tubing method. Then, the release rates were increased in the following order: $PT-{\beta}-CyD$ complex in PEG 1540>PT in PEG 1540>$PT-{\beta}-CyD$ complex in Witepsol H-15>PT in Witepsol H-15. The area under the curve and maximum blood concentration after rectal administration were increased in the following order: $PT-{\beta}-CyD$ complex in PEG 1540>PT in PEG 1540>$PT-{\beta}-CyD$ complex in Witepsol H-15>PT in Witepsol-15.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.2
• /
• pp.245-251
• /
• 2007

A total of 160 d-old male broiler chicks (Cobb) were brooded for three weeks and then maintained at $24{\pm}1^{\circ}C$. Commencing from d 21, chicks were assigned to one of four feeding regimens: (1) diet with 8% palm oil (PO), (2) diet with 8% soybean oil (SO), (3) diet without added fat (control), (4) a choice of PO, SO and control (CH). The diets were formulated to maintain a constant ratio of energy and protein. From d 28 to 41, all birds were exposed to $34{\pm}1^{\circ}C$. The PO, SO and CH birds had greater body weight than controls on d 42. The PO but not SO diet reduced mortality rate, body temperature and serum creatine kinase level of broiler chickens during heat exposure. Although the total intake of control, PO and SO diets was not significantly different during heat exposure, the CH birds had lower creatine kinase activity and mortality rate than those provided SO diet but not significantly different from the birds fed control and PO diets. The relative abdominal fat weight and breast intramuscular fat content percentage were significantly lower in the control birds than those of PO, SO and CH groups. There were no significant differences in both parameters among the three latter groups. These findings suggest that the uncertainty of how much dietary fat to put into diets for heat stressed broilers can be overcome by allowing them to select their own consumption.

• Biomedical Science Letters
• /
• v.24 no.1
• /
• pp.23-29
• /
• 2018

Abdominal obesity is considered as one of the most risky factors governing the development of metabolic diseases. Here we identify that human chitinase 3-like 1 (CHI3L1, also called YKL-40 in human) single nucleotide polymorphism (SNP), rs883125, is associated with abdominal obesity in Korean women. Korean women subjects with the rs883125 G/G or C/G genotype present higher waist-hip ratio than subjects with C/C genotype suggesting that human subjects who G nucleotide substitution at the rs883125 tended to more accumulate intra-abdominal fat at the abdominal cavity. In addition, Chi3l1 gene expression is increased in adipose tissue from obese mice and pro-inflammatory cytokine enhances Chi3l1 expression in adipocytes, indicating that Chi3l1 is greatly related with obesity and obesity-induced pro-inflammatory responses. Taken together, the minor allele of rs883125 is associated with a higher prevalence of abdominal obesity in Korean women. These findings suggest that genotype of rs883125 can be a biomarker of incident abdominal obesity and abdominal obesity-related metabolic diseases.

• Journal of Navigation and Port Research
• /
• v.31 no.10
• /
• pp.833-837
• /
• 2007

In this study, we have fabricated a gain flattened erbium-doped optical fiber amplifier. Gain flattening filters were realized by the strain-induced long period fiber gratings, which are made of periodically arrayed metal wires. Using the filter of $550{\mu}m$ period, spontaneous emission amplified at C-band wavelength by a 980nm pumping laser was flattened within 1dB of gain ripple. The performance of the simultaneous multi channel amplification was measured using a fabry-perot laser diode. Amplification ratio was above 20dB. This amplifier can be applied to the long distance transmission system based on a wavelength division multiplexing for boosting an attenuated signal.