• Bulletin of the Korean Chemical Society
• /
• v.33 no.7
• /
• pp.2305-2308
• /
• 2012

Perovskite structured barium titanate particles ($BaTiO_3$) platelets were synthesized by molten salt synthesis and topochemical microcrystal conversion. As the precursors of $BaTiO_3$, plate-like $BaBi_4Ti_4O_{15}$ particles were first synthesized by the reaction of $Bi_4Ti_3O_{12}$, $BaCO_3$, and $TiO_2$ at $1080^{\circ}C$ for 3 h in $BaCl_2$-KCl molten salt. After the topochemical reactions, layer-structured $BaBi_4Ti_4O_{15}$ particles transformed to the perovskite $BaTiO_3$ platelets. $BaTiO_3$ particles with thickness of approximately $0.5{\mu}m$ and a length of $10-15{\mu}m$ retained the morphology feature of the $BaBi_4Ti_4O_{15}$ precursor. For <001> $Pb(Mg_{1/3}Nb_{2/3})O_3-32.5PbTiO_3$ (PMNT)-5 wt % PbO piezoelectric ceramics textured with 5 vol % of $BaTiO_3$ templates, the Lotgering factor reached 0.82, and $d_{33}$ was 870 pC/N.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.2
• /
• pp.94-102
• /
• 2009

Conceptual design of scroll expander and scroll compressor for 10kW-class Stirling engine utilizing solar energy as heat source has been carried out to estimate the applicability of scroll mechanism for Stirling cycle. CO2 was chosen as working fluid, since it has lower expansion index and higher density among probably usable gases. Gas temperature at the expander inlet was set at $700^{\circ}C$, and that at the compressor inlet was at $40^{\circ}C$. System efficiency reached maximum at the pressure ratio of about 2.5, and the peak efficiency increased with increasing high side pressure. Due to safety concern, the pressure condition of 6 MPa/2.5 MPa was chosen as design condition. Orbiting scroll members for the expander and compressor were designed to have double-sided structure in order to reduce the overall scroll size and to cancel out the axial gas forces acting on the orbiting scroll base plate. By parametric study on the scroll profile, smaller possible size for the scroll members was obtained. With the shaft speed of 3600rpm, the shaft output of the designed scroll expander was calculated to be 45.4kW, while input power for the scroll compressor was 34.5kW, yielding 10.9kW for the output power of the Stirling engine. System efficiency was estimated to be about 7.3%, and overall efficiencies of the scroll expander and compressor were around 84.1% and 88.3%, respectively.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.1
• /
• pp.81-90
• /
• 2002

This paper presents an Implementation of digital high-performance position sensorless control system of Reluctance Synchronous Motor(RSM) drives with Direct Torque Control(DTC). The system consists of stator flux observer, speed and torque estimator, two digital hysteresis controllers, an optimal switching look-up table, Insulated Gate Bipolar Transistor(IGBT) voltage source inverter, and TMS320C31 DSP board. The stator flux observer Is based on the combined voltage and current model with stator flux feedback adaptive control of which inputs are current and voltage sensed on motor terminal for wide speed range. In order to prove the suggested sensorless control algorithm for industrial field application, we have some simulation and actual experiment at low and high speed range. The developed high-performance speed control by fully digital system are shown a good response characteristic of control results and high performance features using 1.0[kW] RSM having 2.57 reluctance ratio of $L_d/L_q$.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.5
• /
• pp.379-386
• /
• 1994

Reactions of 1',2-bis(diphenylphosphino)-l-(N,N-dimethylaminomethyl)ferrocene (FcNPP) with $M(CO)_6$ (M=Cr, Mo, W) in the presence of TMNO (Trimethylamine oxide) in a stoichiometric ratio of 1 : 1.5 : 3.5 produced a series of Gp 6 metal carbonyl derivatives with a variety of coordination modes: M(CO)$_4({\eta}^2$-FcNPP-P,P) (M=Cr, Mo, W), $M(CO)_5({\eta}^1-FcNPP-P) (M=Mo, W)\;,\; M_2(CO)_9({\eta}^1\;,\;{\eta}^2-FcNPP-P,P,N) (M=Cr, Mo)\;,\;M_2(CO)_{10}({\eta}^1\;,\;{\eta}^1-FcNPP-P,P) (M=Cr, Mo, W)\;, and\;W(CO)_4({\eta}^2-FcNPP(O)-P,N)$. All these complexes were characterized by microanalytical and spectroscopic techniques. In one case, the structure of W(CO)$_4({\eta}^2$-FcNPP(O)-P,N) was determined by X-ray crystallography. Crystals are monocinic, space group P$2_{1/C}$, with a=10.147(2), b=19.902(3), c=19.821(4) ${\AA},\;{\beta}=96.88(2)^{\circ},\;V=3974(l){\AA}^3$, Z=4, and $D_{calc}=1.64 g cm^{-3}$. The geometry around the central tungsten metal is a distorted octahedron, with the nitrogen and phosphorus atoms being cis to each other. Some of these complexes exhibited catalytic activities in the allylic oxidation and epoxidation of cholesterly acetate. Other oxidation products were also formed with the different chemical yields and product distribution depending upon the ligand and the central metal.

• Education of Primary School Mathematics
• /
• v.22 no.1
• /
• pp.29-48
• /
• 2019

Previous studies on double scale models, visual models with two different scales (Chong, 2015), have focused on double number line and little research has been conducted on how to employ double scale models in the elementary mathematics textbooks series. Given this, we analyzed the characteristics of double scale models in the Japanese elementary mathematics textbooks in the following aspects: (a) the contents of units where double scale models were used; (b) the purposes of using such models; (c) the types of such models tailored to the contents and grade levels; and (d) the characteristics of problem contexts dealing with the models. The results of this study showed that double scale models were effectively used to connect the contents related to multiplication, specifically for the contexts of ratio. Such models were addressed for students in a systematic and gradual way as the grade levels went up. Based on these results, this paper describes implications on how to use double scale models in mathematics textbooks.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.3
• /
• pp.31-41
• /
• 2019

More than 90% of roadway in the world are paved as asphalt concrete pavement due to its excellent properties compared with other paving materials; excellent riding quality, flexibility, anti-icing property and easy maintenance-ability. In this study, to make best use of the softer property of the asphalt mixture, the flexible sand asphalt mixture (FSAM) was developed for pedestrian ways. The mix design was conducted to prepare FSAM using PG64-22 asphalt, screenings (sand) less than 5mm, crumb rubber, hydrated lime and limestone powder without coarse aggregate. The deformation strength ($S_D$), indirect tensile strength (ITS) and tensile strength ratio (TSR) tests were conducted to make sure durability of FSAM performance. The impact energy absorption and flexibility were measured by drop-boll test and the resilient modulus ($M_R$) test. The impact energy absorption of FSAM was compared with normal asphalt pavement, concrete pavement, stone and concrete block for pedestrian way. As a result of drop-boll test, FSAM showed higher impact energy absorption compared with other paving materials with the range of 18% to 43%. Impact energy absorption of FSAM increased with increasing test temperature from 5 to $40^{\circ}C$. The results of $M_R$ test at $5^{\circ}C$ showed that the flexibility of FSPA was increased further, because the $M_R$ value of the sand asphalt was measured to be 38% lower than normal dense-graded asphalt mixture (WC-1). Therefore, it was concluded that the FSAM could provide a high impact absorbing characteristics, which would improve walking quality of the pedestrian ways.

• Journal of Ginseng Research
• /
• v.46 no.2
• /
• pp.283-289
• /
• 2022

Background: Sarcopenia, defined as loss of muscle mass and strength with age, becomes a public health concern as the elderly population increases. This study aimed to determine whether the mixture of soluble whey protein hydrolysate (WPH) and Panax ginseng berry extract (GBE) has a synergetic effect on sarcopenia and, if so, to identify the relevant mechanisms and optimal mixing ratio. Methods: In the first experiment, C57BL/6 mice were hindlimb immobilized for one-week and then administered WPH 800 mg/kg, GBE 100 mg/kg, WPH 800 mg/kg+ GBE 100 mg/kg mixture, and Fructus Schisandrae extract (SFE) 200 mg/kg for two weeks. In the second experiment, experimental design was same, but mice were administered three different doses of WPH and GBE mixture (WPH 800 mg/kg+ GBE 100 mg/kg, WPH 800 mg/kg+ GBE 90 mg/kg, WPH 1000 mg/kg+ GBE 75 mg/kg). Results: In the first experiment, we confirmed the synergetic effect of WPH and GBE on muscle mass and identified that GBE was more effective on the protein synthesis side, and WPH tended to be slightly more effective for protein degradation. In the second experiment, among three different ratios, the WPH 800 mg/kg+ GBE 100 mg/kg was most effective for muscle mass and strength. The mixtures activated muscle protein synthesis via PI3K/Akt/mTORc1 pathway and inhibited muscle protein degradation via suppressing ubiquitin-proteasome system (UPS) and autophagy-lysosome system (ALS), and these effects were more GBE dose-dependent than WPH. Conclusion: The WPH and GBE mixture having a synergetic effect is a potential agent to prevent sarcopenia.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.24 no.3
• /
• pp.67-74
• /
• 1979

Peanut was cultured with varying planting density and sowing date with and without vinyl-film mulching. Vinyl-film mulching raised soil temperature 4.6$^{\circ}C$ higher than the non-mulched during April and early May, but later-on the soil temperature was similar between the two treatments. The ripening and slender grain ratio increased with closer spacing and earlier sowing. Compared with ordinary cultural practices of May 10th sowing without mulching the peanut yield increased by 9% by mulching sown May 10th, and by 49% by mulching and early sowing April 20th.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.1
• /
• pp.76-80
• /
• 1983

In order to investigate the effect of boron and phosphorus for reduction of cold injury of rice, this experiment was undertaken by pot trial. Two levels of phosphorus and 6 levels of boron were applied once at the three stages such as tillering, panicle formation and meiosis stage. Cold water was irrigated to maintain cool temperature ranging 15 to $18^{\circ}C$ from panicle formation stage. It was shown a tendency that three to seven days of early heading were resulted by the 3, 5 and 10kg of boron application per 10 are. The ripening ratio and physiological root activity was rather slightly increased in the above boron levels.

• Food Science and Preservation
• /
• v.15 no.1
• /
• pp.49-57
• /
• 2008

This study was conducted to develop an optimal composite recipe for a cookie including yam powder that would be attractive to all age groups. Wheat flour was partially substituted by yam powder to reduce the content of wheat flour. This study has produced the sensory optimal composite recipe by making cookies, respectively with each 5 level of yam powder $(X_1)$, Sugar$(X_2)$, butter$(X_3)$, by C.C.D (Central Composite Design) and conducting sensory evaluation and instrumental analysis by means of RSM (Response Surface Methodology). Sensory items showed very significant values in color, softness, overall quality (p<0.01), flavor (p<0.05) and those of instrumental analysis showed significant values in lightness, redness (p<0.05), spread ratio, hardness (p<0.01). Also sensory optimal ratio of yam cookie was calculated at yam powder 37.35 g, sugar 50.75 g, butter 78.40 g and it was revealed that the factors of influencing yam cookie aptitude were in older of yam powder, butter, sugar.