• Journal of Radiation Protection and Research
• /
• v.37 no.1
• /
• pp.41-49
• /
• 2012

The objective of this study is for development of the reference Korean female phantom, HDRK-Woman. The phantom was constructed by adjusting a Korean woman voxel phantom to the Reference Korean data. The Korean woman phantom had been developed based on the high-resolution color slice images obtained from an adult Korean female cadaver. There were a total of 39 organs including the 27 organs specified in ICRP 103 for effective dose calculation. The voxel resolution of the phantom was $1.976{\times}1.976{\times}2.0619\;mm^3$ and the voxel array size is $261{\times}109{\times}825$ in the x, y and z directions. Then, the voxel resolution was changed to $2.0351{\times}2.0351{\times}2.0747\;mm^3$ for adjustment of the height and total bone mass of the phantom to the Reference Korean data. Finally, the internal organs and tissue were adjusted using in-house software program developed for 3D volume adjustment of the organs and tissue. The effective dose values of HDRK phantoms were calculated for broad parallel photon beams using MCNPX Monte Carlo code and compared with those of ICRP phantoms.

• Journal of Bio-Environment Control
• /
• v.14 no.1
• /
• pp.46-51
• /
• 2005

This experiment was conducted to investigate planting depth, which applied the basic data for planting growth ability and mechanical planting of oriental melon. 'Gumssaragi-eunchun' variety was approach grafting to 'Shintozoa' and seedling was growing during 45 days in the 9cm pot and then planted on Jan. 16. The comparison of planting plots was carried out for four experimental plots, which were separated into 0cm, 4.5cm, 9cm, standard cultivation, and 12cm planting depth in soil. In the tunnel of vinyl house, the lowest and the highest temperature was $9.3^{\circ}C\;and\;41.2^{\circ}C$, respectively, and humidity was $59\~99\%$ during Jan. 18 and 19. The faster graft-take rate after planting was the deeper planting depth. The growth of 40 days after planting was not significant in each planting plot, except 0cm experimental plot. Fruit weight was the heaviest in 4.5cm planting depth of experimental plot but sugar content and flesh thickness were not significant in each planting depth. The more depth in planting meant the more increase in fermented fruit rate and decrease in marketable fruit rate. Marketable yield was 2,361kg per l0a in 9cm planting plot, which was $2\%\;and\;1\%$ lower than in 0cm and 4.5cm, respectively, and $11\%$ greater than in 12cm planting plot.

• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• v.25 no.1
• /
• pp.57-81
• /
• 1997

Numerical prediction of nocturnal thermal high in summer of the 1995 near Taegu city located in a basin has been carried out by a non-hydrostatic numerical model over complex terrain through one-way double nesting technique in the Z following coordinate system. Under the prevailing westerly winds, vertical turbulent fluxes of momentum and heat over mountains for daytime hours are quite strong with a large magnitude of more than $120W/\textrm{m}^2$, but a small one of $5W/\textrm{m}^2$ at the surface of the basin. Convective boundary layer (CBL) is developed with a thickness of about 600m over the ground in the lee side of Mt. Hyungje, and extends to the edge of inland at the interface of land sea in the east. Sensible heat flux near the surface of the top of the mountain is $50W/\textrm{m}^2$, but its flux in the basin is almost zero. Convergence of sensible heat flux occurs from the ground surface toward the atmosphere in the lower layer, causing the layer over the mountain to be warmed up, but no convergance of the flux over the basin results from the significant mixing of air within the CBL. As horizontal transport of sensible heat flux from the top of the mountain toward over the basin results in the continuous accumulation of heat with time, enhancing air temperature at the surface of the basin, especially Taegu city to be higher than $39.3^{\circ}C$. Since latent heat fluxes are $270W/\textrm{m}^2$ near the top of the mountain and $300W/\textrm{m}^2$ along the slope of the mountain and the basin, evaporation of water vapor from the surface of the basin is much higher than one from the mountain and then, horizontal transport of latent heat flux is from the basin toward the mountain, showing relative humidity of 65 to 75% over the mountain to be much greater than 50% to 55% in the basin. At night, sensible heat fluxes have negative values of $-120W/\textrm{m}^2$ along the slope near the top of the mountain and $-50W/\textrm{m}^2$ at the surface of the basin, which indicate gain of heat from the lower atmosphere. Nighttime radiative cooling produces a shallow nocturnal surface inversion layer with a thickness of about 100m, which is much lower than common surface inversion layer, and lifts extremely heated air masses for daytime hours, namely, a warm pool of $34^{\circ}C$ to be isolated over the ground surface in the basin. As heat transfer from the warm pool in the lower atmosphere toward the ground of the basin occurs, the air near the surface of the basin does not much cool down, resulting in the persistence of high temperature at night, called nocturnal thermal high or tropical night. High relative humidity of 75% is found at the surface of the basin under the moderate wind, while slightly low relative humidity of 60% is along the eastern slope of the high mountain, due to adiabatic heating by the srong downslope wind. Air temperature near the surface of the basin with high moisture in the evening does not get lower than that during the day and the high temperature produces nocturnal warming situation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.4
• /
• pp.471-482
• /
• 2009

Nutrient availability may control muscle growth directly and indirectly through its influence on regulatory factors. We analyzed the effects of nutrient availability on the breast muscle insulin-like growth factor system. Real time RT-PCR was used to quantify the level of transcription in breast muscle from Langshan (LS) layer and Arbor Acres (AA) broiler chickens subjected to different feeding regimens during embryonic and postnatal development. The AA chickens were fed AA diet (AA, control group) while the LS chickens were either fed LS diet (LL) or AA diet (LA). According to our results, insulin-like growth factor (IGF)-II (embryonic day 16 (E16) - postnatal day 42 (P42)), IGF-I receptor (IGF-IR, E18-P42), and IGF binding protein (IGFBP)-2 (E18-P42), -5 (E16-P14), -7 (E12-P0), and -3 (E12-P0) were positively correlated with IGF-I, while IGFBP-3 (P0-P28) was negatively correlated with IGF-I. In comparison, IGF-IR (E18-P42), IGFBP-2 (E18-P42), IGFBP-5 (E14-P0), and IGFBP-3 (E16-P0) were positively correlated with IGF-II, while IGF-IR (E10-E16) and IGFBP-3 (P0-P28) were negatively correlated with IGF-II. Moreover, IGFBP-2 (E16-P42), -7 (E10-E16), and -3 (E10-E16) were positively correlated with IGF-IR, while IGFBP-3 (P0-P28) was negatively correlated with IGF-IR. Finally, IGFBP-7 (E12-P0) was positively correlated with IGFBP-3, while IGFBP-2 (P0-P28) and -7 (P0-P42) were negatively correlated with IGFBP-3. Overall, the AA chickens exhibited higher levels of IGF-I, IGF-IR, and IGFBP-2 mRNA expression than the LL chickens, while the opposite was true for IGFBP-7. No strain differences in IGF-I, IGF-IR, and IGFBP-7 mRNA expression were detected between LA and AA chickens; however, a strain difference was observed for IGFBP-2. LA chickens exhibited higher levels of IGFBP-2 than LL chickens, while the opposite was true for IGFBP-7. Our data show the first evidence that certain genes may be correlated during specific developmental periods and that strain differences in the expression of those genes in LS and AA chickens are due to differential responses to the same diet.

• Applied Biological Chemistry
• /
• v.13 no.1
• /
• pp.29-34
• /
• 1970

In order to prepare digested Protein source for the Weanling Food from soybean, an attempt was made to decompose steamed soybean protein to amino acids and peptides by protease and cellulase produced from Aspergillus niger and Aspergillus sojae. In this paper, the optimum condition for digestion of soybean protein were studied and also investigated the effects of decolorization of it. As the results, followings were obtained; 1. As steaming conditions, a treatment under 15 lb of pressure and 10 minutes of heating shows most effective. 2. The optimum pH of Asp, sojae enzyme for the digestion of soybean protein is 6.0, while that of Asp. niger enzyme is 4.4. In successievly-decomposing with Asp. sojae and Asp. niger, it shows the most effective on ratio of water-soluble-nitrogen to total nitrogen and amino-nitrogen to total nitrogen than any other separate treatments. 3. The suitable amount of the enzyme solution to that of the soybean substrate paste, in volume, is 1 : 2. 4. Digestion ratio of soybean protein indicates the gradual and steady effects of increasing time of digestion, but 8 hour-digestion regarding to putrefaction was suitable. 5. The most effective decolorization was successively passed on culumns of active carbon and anion exchanger (Dowex 2-x-8) at room temperature. In separate treatments, the effective order of decolorization was as follows; (Dowex 2-x-8)>Active carborn>Amberite IR-120 6. The powder type of the soy protein source obtained by concentration below $60^{\circ}C$ contains 12.51% of moisture, 66.31% of protein, 4.25% of fat, 12.75% of carbohydrate, 4.18% of ash.

• Journal of the Korean Magnetics Society
• /
• v.6 no.2
• /
• pp.67-72
• /
• 1996

The crystallographic and magnetic properties of the ferrimagnetic $CoFe_2O_4$ have been studied by X-ray and Mossbauer measurements. The crystal structure is found to be cubic spinel structure with the lattice constant $a_{0}=8.381{\pm}0.005{\AA}\;and\;a_{0}=8.391{\pm}0.005{\AA}$ for slow-cooled and quenched CoFeZ04' respectively. Mossbauer spectra of $CoFe_2O_4$ have been taken at various temperatures ranging from 13 to 780 K. The isorrer shifts indicate that the valence states of the Fe ions for tetrahedral(A) and octahedral(B) sites have ferric character. Debye temperatures for the A and B sites are found to be ${\theta}_A=734{\pm}5K\;and\;{\theta}_B=248{\pm}5K$ for slow-cooled and ${\theta}_A=531{\pm}5K\;and\;{\theta}_B=197{\pm}5K$ for quenched, respectively. Atomic migration from the A to the B sites starts near 400 K and 350 K for slow-cooled and quenched $CoFe_2O_4$, respectively, am increases rapidly with increasing temperature to such a degree that about 69 % for slow-cooled and 91 % for quenched of the ferric ions on the A sites have rmved over to the B sites at 700 K.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.1
• /
• pp.15-29
• /
• 2005

Statement of problem. The adjustable dental impression trays were made for being adjusted their width automatically along the width of dental arch. Purpose. The purpose of this study was to investigate the best retentive form of adjustable dental impression tray, and so to make it a more satisfactory product. Material and methods. The eight pairs of adjustable trays were made of ABS(acrylonitrile butadiene styrene) with different distribution of holes and with or without the rim on the border area of them. The experiment was done with the horse-shoe shaped metal plate to pull out the set impression body from the tray, and the tray jig which was made for holding the tray on a lower part of Universal Testing Machine(UTM, Zwick Z020, Zwick Co., Germany). After the impression in the tray was allowed to set four minutes, a tensile force was applied at right angles to the tray which had been previously seated on the jig. The force was applied to measure a maximum retentive force by use of a UTM at a constant strain rate of 100mm per minute. A 2-factor analysis of variance (p<.05) was used to determine whether differences existed among distribution of retentive holes and between rim existing and not. Results. 1 The retentive force of the upper and lower resin tray with 2mm holes on the tray border was highest(25.83/24.98kg). (p<.05) 2. As the tray had more retentive holes, it was less retentive. 3. There was no significant difference in the retentive force of the varied hole intervals in the case of distributing all the area. (p>.05) 4. The rimless trays were more retentive generally, than the rimmed trays except 2 case: upper tray group-all area / 2 mm, intervals and lower tray group-margin only / 2 mm, intervals.(p<.05) 5. Most of the adjustable trays were showed higher retentive force than perforated metal tray except the lower group that perforated on the all area at intervals of 2 mm.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.2
• /
• pp.199-206
• /
• 2001

The purpose of study was to compare the plasma arc light with the halogen light in compostie resin curing. Three composite resin materials(Z-100, 3M, USA; Tetric Ceram, Vivadent, Liechtenstein; SureFil, Dentsply, USA) were filled in the teflon molds (4mm in diameter and 2, 3, 4, 5mm in thickness) and cured with either the conventional low-intensity light curing unit with a halogen lamp (Optilux 360, Demetron, U.S.A.) for duration of 40 seconds or with the high-intensity light curing unit with a plasma arc lamp (Flipo, Lokki, France) for duration of 3, 6, and 9 seconds. The intensity of halogen light was about $370mW/cm^2$ and that of plasma light was about $1,900mW/cm^2$. After one week, the surface hardnesses of both the top and the bottom of the resin samples were measured with a microhardness tester(MXT70, Matsuzawa, Japan). There were significant differences in the hardness between the top and the bottom of the resin samples except the 2mm thickness samples cured by halogen light for 40s or by plasma light for 9s. There was no significant difference between the hardness values of the top surfaces of the thickness groups. The hardness values of the bottom surfaces decreased as the curing time decreased and as the thickness of resin samples increased, and the three kinds of resin composites showed similar patterns. The results suggest that the halogen light for 40 seconds might be able to cure greater depth of resin composites than the plasma light for 3, 6, or 9 seconds.

• Korean Journal of Radiology
• /
• v.19 no.6
• /
• pp.1110-1118
• /
• 2018

Objective: To perform a meta-analysis to quantitatively assess functional magnetic resonance imaging (MRI) in the diagnosis of locally recurrent prostate cancer. Materials and Methods: A comprehensive search of the PubMed, Embase, Cochrane Central Register of Controlled Trials, and Cochrane Database of Systematic Reviews was conducted from January 1, 1995 to December 31, 2016. Diagnostic accuracy was quantitatively pooled for all studies by using hierarchical logistic regression modeling, including bivariate modeling and hierarchical summary receiver operating characteristic (HSROC) curves (AUCs). The Z test was used to determine whether adding functional MRI to T2-weighted imaging (T2WI) results in significantly increased diagnostic sensitivity and specificity. Results: Meta-analysis of 13 studies involving 826 patients who underwent radical prostatectomy showed a pooled sensitivity and specificity of 91%, and the AUC was 0.96. Meta-analysis of 7 studies involving 329 patients who underwent radiotherapy showed a pooled sensitivity of 80% and specificity of 81%, and the AUC was 0.88. Meta-analysis of 11 studies reporting 1669 sextant biopsies from patients who underwent radiotherapy showed a pooled sensitivity of 54% and specificity of 91%, and the AUC was 0.85. Sensitivity after radiotherapy was significantly higher when diffusion-weighted MRI data were combined with T2WI than when only T2WI results were used. This was true when meta-analysis was performed on a per-patient basis (p = 0.027) or per sextant biopsy (p = 0.046). A similar result was found when $^1H$-magnetic resonance spectroscopy ($^1H$-MRS) data were combined with T2WI and sextant biopsy was the unit of analysis (p = 0.036). Conclusion: Functional MRI data may not strengthen the ability of T2WI to detect locally recurrent prostate cancer in patients who have undergone radical prostatectomy. By contrast, diffusion-weight MRI and $^1H$-MRS data may improve the sensitivity of T2WI for patients who have undergone radiotherapy.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.55 no.1
• /
• pp.29-38
• /
• 2019

In order to investigate the behavioral characteristics of Pacific cod (Gadus macrocephalus) released at the entrance of Jinhae Bay, Korea, the direction and range of movement, swimming speed of the fish were measured with an acoustic telemetry techniques in winter, 2015. Three wild Pacific codes WC1 to WC3 (total length 66.0, 75.0, 76.0 cm; body weight 2.84, 2.79, 3.47 kg, respectively) were tagged with the acoustic transmitter. WC1 tagged with an acoustic transmitter internally by surgical method, WC2 and WC3, externally with the acoustic data logger and a micro data logger for recording audible sound waves including timer release unit. The movement routes of the tagged fish were measured more than five hours using VR100 receiver and a directional hydrophone. The directionality of the fish movement was tested by Rayleigh's z-Test, the statistical analysis, and a statistical program SPSS. Three tagged fishes were individually released on the sea surface around the entrance to the Jinhae Bay on 10 to 24 January 2015. WC1 moved about 13.32 km with average swimming speed of 0.63 m/s for six hours. The average swimming depth and water depth of the seabed on the route of WC1 were 7.2 and 32.9 m, respectively. The movement range of WC2 and WC3 were 7.95 and 11.06 km, approximately, with average swimming speed of 0.44 and 0.58 m/s for 5.1 and 5.3 hours, respectively. The average swimming depth of WC2 and WC3 were 18.7 and 5.0 m, and the water depth on the route, 34.4 and 29.8 m, respectively. Three fishes WC1 to WC3 were shown significant directionality in the movement (p < 0.05). Movement mean angles of WC1 to WC3 were 77.7, 76.3 and $88.1^{\circ}$, respectively. There was no significant correlation between the movement direction of fish (WC1 and WC2) and the tidal currents during the experimental period (p >= 0.05). Consequently, three tagged fishes were commonly moved toward outside of the entrance and headed for eastward of the Korean Peninsula, approximately, after release. It may estimate positively that the tidal current speed may affect to the swimming speed of the Pacific cod during the spring tide than the neap tide.