• Korean Journal of Ichthyology
• /
• v.26 no.2
• /
• pp.112-117
• /
• 2014

The spawning behavior, development of eggs and larvae of the blennioid fish, Dictyosoma burgeri were investigated. The blennioid fish were caught at Hwayang-myeon, Yeosu-si, Jeollanam-do from December 2013. The egg was spherical, measuring from 1.31 to 1.47 mm in diameter. The incubation period of the egg extended from 744 hrs at the temperature varying between 14.5 and $16.5^{\circ}C$. The newly hatched larvae were 7.10~7.60 mm(mean $7.34{\pm}0.18mm$) in total length. Two days after hatching, prelarvae was measured 8.43~8.47 mm (mean $8.45{\pm}0.01mm$) in total length. They began to eat rotifer and transformed to postlarvae stage. Six days after hatching, postlarvae was measured 9.06~9.13 mm(mean $9.10{\pm}0.02mm$) in total length.

• The Korean Journal of Elementary Counseling
• /
• v.4 no.1
• /
• pp.215-236
• /
• 2005

The Purpose of this study is that self-growth program searches effect self-concept and peer-relationship with elementary school student, and advance following assumption to achieve this purpose and achieved study. First, self-concept point of experiment group students who execute self-growth program will be improved is meaning than self-concept point of control group students. Second, peer-relationship point of experiment group students who execute self-growth program will be improved is meaning than peer-relationship point of control group students. Third, effect that self-growth program gets to self-concept may be meaning difference according to sex. Fourth, difference that impact that self-growth program gets in peer- relationship is meaning according to sex may join. Chose fifth-year student 2 class 68 people (experiment group n=34, control group n=34) in I primary school locating to Jeonrabuk-do Iksan-si to verify above construction for study target. Disposal about experiment group executed over 10th for 60-80 minute 2 times in a week because investigator uses reconstructing self-growth program with virtue research paper such as learning program for own growth of Lee-Hyeong-Deuk (1998). In order to verify the effect after experiment, 1 collected materials for estimation by providing the subject children with questionaires about self-concept and peer-relationship before and after the experiment, and then analyzed the average differences in number of marks between the experiment group and the control group before and after the experiment through and by using One-Way ANOVA, and SPSS 11.0 program. The following is the result what I obtained from the above study. First, there was significant difference is between average difference before and after of experiment group and control group which execute self-growth program in self-concept elevation ($F_{(1,66)} =28.734$, p <.001). From the sub-variable, there was significant difference in academic self ($F_{(1,66)}=6.423$, p<.05), Social Self ($F_{(1,66)}=48.331$, p<.001), Physical Self ($F_{(1,66)}=11.074$, p <.01), sentimental self ($F_{(1,66)}=9.402$, p <.01) Second, there was significant difference is average difference before and after of experiment group and control group which execute self-growth program in peer-relationship promotion ($F_{(1,66)}=24.109$, p <.001). From the sub-variable there W3S Significant difference in trust ($F_{(1,66)}=14.507$, p<.001), respect ($F_{(1,66)}=15.271$, p <.001). Third, there was expose that significant difference does not exist in average self-concept before and after by sex of experiment group which executes self-growth program, and was not shown significant difference in sub-vairable. Fourth, there was expose that significant difference of whole peer- relationship and in respect of sub-variable in average peer-relationship before-after by sex of experiment group which execute self-growth program, but significant difference did not appear in trust. Could get conclusion that self-growth program is effect in elementary school student self-concept elevation and peer-relationship promotion according to these study finding, and confirmed possibility that self-growth program may contribute to change emotional special quality of children positively in education spot.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.5
• /
• pp.456-463
• /
• 2015

The objective of this study was to determine the effects of granular type of silicate fertilizer on watermelon growth, yield, and characteristics of soil in the greenhouse. Four different levels of silicate fertilizer, 0(control), 600, 1,200, $1,800kg\;ha^{-1}$ were applied for experiment. The silicate fertilizer was applied as a basal fertilization before transplanting watermelon. Compost and basal fertilizers were applied based on the standard fertilizer recommendation rate with soil testing. All of the recommended $P_2O_5$ and 50% of N and $K_2O$ were applied as a basal fertilization. The N and $K_2O$ as additional fertilization was split-applied twice by fertigation method. Watermelon (Citrullus lanatus Thunb.) cultivar was 'Sam-Bok-KKuol and main stem was from rootstock (bottle gourd: Lagenaria leucantha Standl.) 'Bul-Ro-Jang-Sang'. The watermelon was transplanted on April, 15. Soil chemical properties, such as soil pH, EC, available phosphate and exchangeable K, Mg, and available $SiO_2$ levels increased compared to the control, while EC was similar and the concentrations of soil organic matter decreased. Physical properties of soils, such as soil bulk density and porosity were not different among treatments. The growth characteristics of watermelon, such as stem diameter, fresh and dry weight of watermelon at harvest were thicker and heavier for silicate treatment than the control, while number of node was shorter than the control. Merchantable watermelon increased by 3-5% compared to the control and sugar content was 0.4 to $0.7^{\circ}Brix$ higher than the control. These results suggest that silicate fertilizer application in the greenhouse can improve some chemical properties of soils and watermelon stem diameter and dry weight, which are contributed to watermelon quality and marketable watermelon production.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.144.2-144.2
• /
• 2016

Diamond-like carbon (DLC) coatings have been widely applied to the mechanical components, cutting tools due to properties of high hardness and wear resistance. Among them, hydrogenated amorphous carbon (a-C:H) coatings are well-known for their low friction properties, stable production of thin and thick film, they were reported to be easily worn away under high temperature. Non-hydrogenated tetrahedral amorphous carbon (ta-C) is an ideal for industrial applicability due to good thermal stability from high $sp^3$-bonding fraction ranging from 70 to 80 %. However, the large compressive stress of ta-C coating limits to apply thick ta-C coating. In this study, the thick ta-C coating was deposited onto Inconel alloy disk by the FCVA technique. The thickness of the ta-C coating was about $3.5{\mu}m$. The tribological behaviors of ta-C coated disks sliding against $Si_3N_4$ balls were examined under elevated temperature divided into 23, 100, 200 and $300^{\circ}C$. The range of temperature was setting up until peel off observed. The experimental results showed that the friction coefficient was decreased from 0.14 to 0.05 with increasing temperature up to $200^{\circ}C$. At $300^{\circ}C$, the friction coefficient was dramatically increased over 5,000 cycles and then delaminated. These phenomenon was summarized two kinds of reasons: (1) Thermal degradation and (2) graphitization of ta-C coating. At first, the reason of thermal degradation was demonstrated by wear rate calculation. The wear rate of ta-C coatings showed an increasing trend with elevated temperature. For investigation of relationship between hardness and graphitization, thick ta-C coatings(2, 3 and $5{\mu}m$) were additionally deposited. As the thickness of ta-C coating was increased, hardness decreased from 58 to 49 GPa, which means that graphitization was accelerated. Therefore, now we are trying to increase $sp^3$ fraction of ta-C coating and control the coating parameters for thermal stability of thick ta-C at high temperatures.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.55 no.2
• /
• pp.111-120
• /
• 2022

This study was conducted to prepare braised product with soy sauce (BP), rose gratin (RG) and white mousse (WM) using Japanese Spanish mackerel Scombermorus niphonius as senior-friendly seafoods with different physical and nutritional properties and to examine their quality characteristics. The hardness of BP, RG and WM were 428.0×10³, 46.9×10³ and 16.0×10³ N/m², respectively. The nutritional values of BP, RG and WM are 17.8, 9.1 and 18.5 g, respectively, for protein; 11.86, 23.32 and 13.35 ㎍ RAE, respectively, for vitamin A; 1.27, 0.49 and 0.17 ㎍, respectively, for vitamin D; 45.21, 12.79, and 35.54 mg, respectively, for vitamin C; 0.17, 0.13 and 0.23 mg, respectively, for riboflavin; 4.28, 2.94 and 3.65 mgNE, respectively, for niacin; 19.6, 104.0 and 48.1 mg, respectively, for Ca; 441.6, 271.1 and 250.1 mg, respectively, for K; 0.20, 0.80 mg and undetection, respectively, for dietary fiber. Escherichia coli was undetected in all the products. These results indicated that the products be classified as steps 1 for BP, step 2 for RG and step 3 for WM of senior-friendly seafoods based on the KS, and as nutritional and physical properties-improved senior-friendly seafoods based on the Food Code.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.205-208
• /
• 2005

최근 열선 화학 기상 증착법(HWCVD)은 낮은 온도에서 TFT용 Poly Si 중착을 할 수 있다는 점과 실리콘 박막을 빠른 속도로 증착할 수 있다는 점에서 각광을 받고 있다. 본 연구에서는 HWCVD를 이용하여 태양전지를 제조하고 그 특성을 평가하였다. 조건에 따른 실리콘 박막의 특성 변화를 알기 위해 corning glass 및 실리콘 wafer에 다양한 조건에서 단위 박막(intrinsic layer)을 증착하였고 이 결과를 바탕으로 p/i/n 구조의 태양전지를 제조하였다. Ta 열선 온도는 1700-2000도였고 가스 원료인 $SiH_4$와 수소의 비율을 조절하면서 그 영향을 관찰하였다. 태양전지의 경우 p충과 n충은 PECVD로 증착하였으며 단위박막 및 태양전지 i충 증착시 기판과 열선간의 거리는 7cm, 기판 온도는 $200^{\circ}C$와 $250^{\circ}C$로 고정하였고 작업압력은 30mTorr였다. 단위 박막 특성 평가를 위해 암/광 전도도, SEM, Raman Scattering, FT-IR등을 사용하였으며 태양전지 특성 평가를 위해 I-V 및 Spectral response를 측정하였다. 열선 온도가 증가함에 따라 증착속도 및 결정화 분율은 증가하였다. 특히 비정질에서 결정질로 전이되는 구간은 매우 좁았으며 여러 분석 방법에서 일치되는 결과를 보였다. $SiH_4$ 유량이 늘어날수록 비정질이 결정질로 바뀌는 열선 온도가 증가하였으며 기판 온도가 낮을 경우 또한 결정으로 바뀌는 열선 온도가 증가하였다. 태양전지의 경우 열선 온도가 증가함에 따라 $V_{oc}$ 및 W가 낮아졌으며 $J_{sc}$, 는 증가하는 경향을 보였으며 결정질 비율이 증가하는 것을 관찰할 수 있었다. 이러한 경향은 quantum efficiency 결과에서도 확인할 수 있었다.용을 반복하면서 석재 내부와 외부의 암석 및 결정에 균열과 미세열극 등이 생성되어 석재 자체의 구조적 안정성에 영향을 주고 있다. 따라서 감은사지 석탑은 지리적 환경 차이로 인해 일반적인 환경의 석조물들과는 다른 형태의 풍화양상을 보이고 있어서 풍화양상 및 풍화형태에 대한 정확한 연구와 이해를 바탕으로 보존대책이 마련되어야 한다.되었다. 이런 모든 시편들을 각 탈염방법에 따라 탈염처리한 후 XRD와 SEM-EDS으로 분석한 결과 인철광과 침철광은 어떠한 변화도 보이지 않았고, 다만 적금광으로 동정된 시편만이 잔존하지 않았다. 철기 제작별 $Cl^-$ 이온 추출량과 탈염효과에 대한 비교 실험은 이온 크로마토그래피 분석 결과와 마찬가지로 단조 철제유물이 주조 철제보다 $Cl^-$ 이온을 많이 가지고 있었으며, 탈염 처리 후에는 $Cl^-$ 이온은 전혀 발견되지 않았다. 이상의 결과 $K_2CO_3$와 Sodium 용액은 탈염처리에서 가장 적합한 탈염처리 용액으로 알수가 있었으며 특히 어떠한 탈염 용액으로 유물을 처리한다 해도 철제유물에 생성된 부식물은 제거되지 않는다는 것을 알게 되었다. 따라서 보존처리자는 유물 표면의 부식 상태만을 보고 처리하기 보다는 철기제작물로 고려하여 처리하는 것이 필요하다. 또한 금속에 부식을 야기시키는 $Cl^-$ 이온과 부식물을 완전하게 제거하여 탈염처리를 하는 것이 유물 부식을 최대한 지연시킬 수 있는 것이라 생각된다.TEX>$88\%$)였다.(P=0.063). 결론: 본 연구에서는 MTHFR C/T & T/T 유전자 다형성이 위암의 발생과 그 위치에 대해 관련이 있는 것으로 여겨지고, 흡연력, 음주력과는 관련이 없는 것으로 여겨진다.험이 커지는 경향을 보였으나, 나이 및 병기, 종양의 크기, MD-BED $Gy_{10}$ 등의 예후 인자를 보정한 다변

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.1
• /
• pp.68-73
• /
• 1986

In order to identify the physiological maturity and to determine the proper time of harvesting as fresh seed for cooking with rice and germination ability according to the harvesting time in cowpea (Vigna unguiculata (L.) Walp), this experiment was conducted. The results obtained are as follows; 1. The length and width of pods became maximum size on 10 days after flowering(DAF) and thickness of them increased to 14 DAF and then decreased to 18 DAF. 2. The weight of pod wall reached the maximum on 14 DAF, the thickness of them increased to 8 DAF and decreased to 18 DAF and it was stabilized. 3. The length and thickness of the seeds became larger to 10 DAF, were not changed from 10 DAF to 16 DAF and then decreased after 16 DAF. 4. The seeds coloured 2 days earlier than the pod wall on 8 DAF and the grade increased by degrees to 16 DAF. 5. The moisture content of seeds and pod wall started to decrease on 8 DAF and the moisture content of pod wall was higher than that of seeds in the middle stage but the condition changed after 18 DAF. 6. When the weight of seeds reached the maximum on 16 DAF, the moisture content of them was 54.5%. 7. The content of total nitrogen, phosphate and oil decreased but the carbohydrate increased by degrees along the passing of DAF. The silicic acid did not exist and K$_2$O, CaO, MgO, protein etc. existed but did not show regular tendency. 8. The physiological maturity was 16 DAF and the proper time of harvesting as fresh seed for cooking with rice was 12 DAF to 16 DAF. 9. Germination was possible after 10 DAF but we could get the normal roots from the seeds harvested after 14 DAF.

• Applied Biological Chemistry
• /
• v.7
• /
• pp.15-19
• /
• 1966

In order to investigate the stability of the major component of malathion E.C. product, dimethyl S-(1, 2-dicarboxyethoxyethyl) dithiophosphate, toward the quality of glasswares as container, the amount of extractable inorganic components, change of pH and decomposition of the major component of the product were examined during the storage in brown-colored bottles of 100 ml. volume from 3 different companies in comparison with that in a Pyrex flask. 1. Malathion E.C. product was put in three containers A,B and C, and any changes occurring in storage were analyzed at three intervals of 60, 120 and 240 days. 2. It was shown that the amounts of Si, Mg, K, Ca, and Na extracted during these periods of storage differed markedly depending on the qualify of container. Container A revealed ten times higher extraction of Na and Ca than container B and C in a 8-month period. 3. Three commercial containers revealed the shift of pH from 6.5 to alkaline reaction in the storage whereas the Pyrex flask did not show any detectable change. In particular, the pH in container A changed to 9.2 in 60 days and 9.9 in 240 days. 4. The decomposition of malathion was the greatest in container A which showed the decomposition of 7.37% in 240 days. On the other hand, 0.5% was decomposed in the Pyrex flask. 5. The decemposition of malathion had a high correlation with the change of pH of water· in the same container, $r^2$ being 0.899. From the above results, it is concluded that about 10% of malathion E.C. product is decomposed in a year due to the alkaline metallic salts extracted from the container when it is stored in glassware bottles of lower quality.

• Korean Journal of Ichthyology
• /
• v.26 no.1
• /
• pp.25-33
• /
• 2014

This study was conducted to observe the spawning behavior and early life histroy of elegant blenny, Omobranchus elegans reared in the laboratory. The elegant blenny were caught at Dolsan lsland, Yeosu-si, Jeollanamdo from June in 2012. As a result of observeation, male fish attracted female continuously and guide lead to spawning site and clean the surface of inner pant in oyster shell or barnacle shell. Female left after spawning and male protected their eggs until they had hatched out. The fertilized eggs were spherical in shape (mean diameter: 1.06 mm; mean oil globule diameter: 0.24 mm) and transparent. Larvae hatched at 203 hrs 40 mins after fertilization at $25.5{\sim}28.5^{\circ}C$ (mean $27.0^{\circ}C$). The newly hatched larvae were 3.04~3.09mm(mean 3.06 mm, n=10) in total length and their mouth and anus were already opened. They began to eat rotifer and transformed to postarvae stage. 10 days after hatching postlarvae was measured 6.39~6.45mm(mean 6.42 mm, n=10) in total length. 60 days after hatching juvenile was measured 21.5~22.2 mm (mean 21.8 mm, n=10) in total length with dosal fin rays XI-22; ventral fin rays I-2; anal fin rays II-23; caudal fin rays 21; pectoral fin rays 13.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.26.1-26.1
• /
• 2009

최근 반도체 세정에 있어서 지난 40년 동안 지속적으로 사용되고 있는 알칼라인 기반의 RCA 세정법은 많은 초순수 및 화학액 소모량과 세정시 불필요한 박막의 손실, 환경적인 문제로 인하여 이를 대체하고자 하는 새로운 새정액 및 세정 방법에 대한 연구가 활발하게 이루어지고 있다. 특히 초순수에 가스를 혼합하여 메가소닉을 이용한 기능수 세정은 기존 RCA 세정액의 문제점들을 해결하기 위한 세정액으로 최근 반도체 제조 공정 뿐만 아니라 Photo mask, FPD 세정 공정에서 널리 이용되고 있다. 하지만 기능수에 대한 기초적인 특성 연구와 메가소닉에 의한 세정력 변화에 대한 연구는 부족한 상태이다. 본 연구에서는 고순도의 수소가스(99.999%)를 가스 접촉기, pHasorII (Entigris, USA) 와 순환 속도의 조절이 가능한 펌프, BPS-3 (Levitronix, USA) 를 이용하여 지속적으로 초순수와 수소가스를 혼합하는 방법으로 수소수를 제조하였으며, 용존 수소 농도계, DHDI-1 (TOA-DKK, Japan)으로 수소수의 농도를 확인하였다. 0.1 MPa 압력과, 3 LPM의 수소가스 유출속도에서 최대 2.0 ppm의 수소수를 얻을 수 있었으며, 수소수의 기초 특성을 평가하기 위하여 수소 농도 변화에 따른 pH, 표면 에너지를 측정하였다. 또한 압력 변화에 따른 반감기를 측정하여 bath형태의 세정기에서 적용 가능성을 평가하였다. 수소수의 세정력은 $Si_3N_4$ 입자가 임의로 오염된 실리콘 웨이퍼를 이용하여 bath 및 매엽식 세정기에서 수소수 농도와 메가소닉 형태 및 첨가제 변화에 따른 세정효율을 기존의 SC-1 세정액과 각각 비교 평가하였다. 기능수 발생장치에서 압력이 제거된 상태에서는 평균 20분의 반감기를 갖는 것이 관찰되었고, 압력이 유지된 상태에서는 수소수의 농도가 유지되는 것을 확인하였으며, pH의 경우 수소수의 농도가 점차 증가함에 따라 감소하여 2.0 ppm의 농도에서 pH 5.3정도의 값을 나타내었다. 표면 장력은 초순수와 비교했을 때 큰 변화가 없음을 확인할 수 있었다. Bath 형태의 세정기에서 메가소닉을 인가하여 수소수의 세정효율을 측정한 결과, 같은 조건에서 실험한 초순수와는 비슷하며, SC-1보다는 낮은 세정효율이 측정되었다. 반면 매엽식 세정기에서 동등한 조건의 실험을 실시한 결과, 수소수 세정에서 첨가제에 의한 영향으로 SC-1을 대체할 수 있는 높은 입자 제거효율을 가짐을 확인할 수 있었다.