• Journal of Nutrition and Health
• /
• 제26권6호
• /
• pp.661-671
• /
• 1993

The change in fatty acid composition in brain tissue of the second generation rats(Sprague-Dawley strain) was studied using four different fat diets(Corn oil=CO, Soybean oil=SO, Perilla oil=PO, Fish oil=FO, 10% by Wt). The experimental diets were started from pregnancy in four different groups, each consisting of 9 rats. The seound generation rats were fed the same diet as their mothers. Animals were anesthetized with ether at 0, 3, 9 & 16 weeks of age. Whole brains were dissected out, brain tissues were, then, homogenized and lipids were extracted from brain tissues. The fatty acid compositions were measured after methylation by gas-liquid chromatography at 0, 3, 9 and 16 weeks of age of offspring. The changes in the relative concentrations of polyunsaturated fatty acids(PUFA) or more specifically docosahexaenoic acid(22 : 6, $\omega$3, DHA), the major $\omega$3 fatty acid component in rat brain at different age were similar to changes in the amount of DNA in brain tissue showing the maximum value during the lactation. The changes in saturated fatty acid(SFA) content showed a contrasting patten to those of PUFA, while monounsaturated fatty acid(MUFA) increased steadily throughout the experimental period. At birth, the relative concentrations of $\omega$3 series fatty acids the relative concentrations of PUFA, MUFA and SFA converged to very similar values respectively regardless of the dietary fatty acid compositions. In brain tissue, it is of value to note that while changes in relative concentrations of linoleic acid (18 : 2, $\omega$6, LA) and arachidonic acid(20 : 4, $\omega$6, AA) showed a precursor-product-like relationship, $\alpha$-linolenic acid(18 : 3, $\omega$3, $\alpha$-LnA) and DHA showed a different pattern. Even when the $\omega$3 fatty acid content in very low in maternal diet(CO), the second generation rat brain tissues appeared to secure DHA content, suggesting an essential role of this fatty acid in the brain. The fact that a large amount of $\alpha$-LnA in the maternal diet did not have a significant effect on the second generation rat brain $\alpha$-LnA content, indicated that DHA seemed essential component for the brain development in our experimental condition. In all groups, the relative content of $\alpha$-LnA in the brain tissues remained relatively constant throughout the experimental period at the very low level. The study of the specific concentrations and essential role(s) of DHA in each parts of brain tissue is needed in more details.

• 한국대기환경학회지
• /
• 제8권4호
• /
• pp.213-220
• /
• 1992

Simple correlation analysis, factor analysis, and multi-variate analysis have been performed to analyze the relationship between air pollution and meteorological factors for air pollution and meteorological data measured at Kwanghwamun in Seoul during the period of one year(January 1990 $\sim$ December 1990). As a result of simple correlation and factor analysis, $SO_2$, TSP and CO concentrations have shown high negative correlation with temperature and among these indicating that these are related with pollutant emission trend based upon heating fuel usage. Ozone has a good corrleation with solar radiation and relative humidity to have a closed relation with $O_3$ generation reaction mechanism. The result of multi-variate correlation analysis shows that the concentration of $SO_2$ and CO are adequate for correlation model with ambient temperature and wind speed and $O_3$ concentrations are adequate for that with solar radiation and wind speed. $SO_2$ and CO levels are considered to be affected first of all by heating fuel usage as a emssion source and wind speed as a dispersion effect. The $SO_2$ concentration in the condition that the temperature fall below zero is explained by multilicative model with wind speed, only one variable.

• 환경위생공학
• /
• 제7권2호
• /
• pp.141-152
• /
• 1992

Simple correlation analysis, factor analysis, and multi-verite analysis have been performed to analyze the relationship between air pollution and meteorological factors for air pollution and meteorological data measured at Kwanghwamun in Seoul during the period of one year (January 1990" December 1990). As a result of simple correlation and factor analysis, $SO_2$, TSP and CO concentrations have shown high negative correlation with temperature and among these indicating that these are related with pollutants emission trend based upon heating fuel usage. Ozone has a good correlation with solar radiation and relative humidity to have a closed relation with $0_3$ generation reaction mechanism. The result of multi-variate correlation analysis shows that the concentration of $SO_2$ and CO are adequate for correlation model with ambient temperature and wind speed and 0$_{3}$ concentrations are adequate for that with solar radiation and wind speed. $SO_2$ and CO levels are considered to be affected first of all by heating fuel usage as a emission source and wind speed as a dispersion effect. The $SO_2$ concentration in the condition that the temperature fall below zero is explained by multiplicative model with wind speed, only one variable.

• 대한원격탐사학회지
• /
• 제28권3호
• /
• pp.319-327
• /
• 2012

In this paper, we introduce a newly developed photogrammetric software for automatic generation of high quality geo-products and its performance assessment carried out using various satellite images. Our newly developed software provides the latest techniques of an optimized sensor modelling, ortho-image generation and automated Digital Elevation Model (DEM) generation for diverse remote sensing images. In particular, images from dual- and multi-sensor images can be integrated for 3D mapping. This can be a novel innovation toward a wider applicability of remote sensing data, since 3D mapping has been limited within only single-sensor so far. We used Kompsat-2, Ikonos, QuickBird, Spot-5 high resolution satellite images to test an accuracy of 3D points and ortho-image generated by the software. Outputs were assessed by comparing reliable reference data. From various sensor combinations 3D mapping were implemented and their accuracy was evaluated using independent check points. Model accuracy of 1~2 pixels or better was achieved regardless of sensor combination type. The high resolution ortho-image results are consistent with the reference map on a scale of 1:5,000 after being rectified by the software and an accuracy of 1~2 pixels could be achieved through quantitative assessment. The developed software offers efficient critical geo-processing modules of various remote sensing images and it is expected that the software can be widely used to meet the demand on the high-quality geo products.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.99.2-99.2
• /
• 2011

Transparent conducting oxides (TCOs) supported on glass are widely used as substrates in PEC studies for photovoltaic hydrogen generation applications However, high sheet resistane ($10{\sim}15{\Omega}/cm^2$) and fragileness of glass-supported TCO substrates are the obstacles to produce the large area PEC cells. Such internal sheet resistance is detrimental to efficient collection of photogenerated majority charge carriers at the photoactive material and electrolyte interface. Moreover, these TCO substrates are very expensive and consume about 40~60% cost of the devices. Hence, a low sheet resistance of the substrate is a key point in improving the performance of PEC devices. Metallic substrates coated with a photoactive material would be a good choice for efficient charge collection. Such metal substrates based photanodes are best candidate for large-scale phtoelectrochemical water splitting for hydrogen generation. In this study, we report the enhanced PEC performance of $WO_3$ film on metal(chemical etched, bare) substrate. It is proposed that interface between $WO_3$ and the metal substrate is responsible for efficient charge transfer and demonstrated significant improvement in the photoelectrochmical performance. X-ray diffration and FESEM suduies reveled that $WO_3$ films are monoclinic, porous, polycrystalline with average grain size of ~50nm. Photocurrent of $WO_3$ prepared on metal substrates was measured in 0.5M $H_2SO_4$ electroyte under simulated $100mW/cm^2$ illumination.

• 한국시뮬레이션학회논문지
• /
• 제20권3호
• /
• pp.79-88
• /
• 2011

함정 전투체계는 무기체계, 정보통신 등의 기술 발전으로 인한 복잡한 전장 환경에 적응하기 위하여 다양한 전술을 운용해야 한다. 현재 운용되는 국방 M&S 시스템은 의사결정을 위해 운용자, 즉 인간의 개입이 필수적이다. 하지만 인간이 개입되는 시뮬레이션은 실시간 정도의 저속에서 가능하고, 반복적인 실험의 어려움이 따르게 된다. 이를 개선하기 위해 에이전트 기반의 국방 M&S 시스템의 연구가 최근 들어 활발히 진행되고 있다. 그러나 현존하는 에이전트 기반 M&S 시스템은 고속 시뮬레이션은 가능하지만, 고정된 전술 분석용으로 활용되는데 그치고 있다. 따라서 본 논문에서는 주어진 시나리오에 대한 고속의 반복적인 실험 및 다양한 전술 운용과 창발적 전술 생성을 위해 진화론적 시뮬레이션을 이용한 다대다 함정교전 전술 생성 방법론을 제안하였다. 타당성 검증을 위해 서해상에서 벌어지는 가상의 3:3 함정교전 시뮬레이션을 수행하였고, 이를 통해 창발적 전술 생성의 가능성을 제시하였다.

• 한국차세대컴퓨팅학회논문지
• /
• 제15권4호
• /
• pp.40-50
• /
• 2019

최근에는 증강 현실 기술과 가상 현실 기술이 사용되는 의료 영상 분야에서 Low-end 시스템에 대한 정확한 인체 모델을 시각화하는 것이 중요하다. 모델의 기하구조를 줄이면 원래 모양과 다른 점이 나타나고 그 차이를 오류로 간주한다. 따라서 기하구조를 축소하면서 오류를 최소화해야 한다. 본 연구에서는 CT 나 MRI 등의 단층 영상에서 인체 장기에 해당하는 영역을 분할하여 3 차원 기하학적 모델을 생성함으로써 다중 해상도의 상세 단계 모델의 재구성 방법을 구현했다. 실험에서 가상 현실 플랫폼은 척추 영역을 재구성한 모델의 모양을 검증하기 위해 구축되었다. 가상 현실 플랫폼을 이용하여 3D 인체 모델과 환자 정보를 확인할 수 있다.

• 현장농수산연구지
• /
• 제19권1호
• /
• pp.25-38
• /
• 2017

본 연구는 내병 만추대이고 적색 발현이 양호한 양친을 중심으로 11개 교배조합을 작성하였다. 선발된 계통은 F₂ 42조합 137계통, F₃ 4조합 17계통, F₄ 11조합 27계통, F₅ 7조합 30계통, F₆ 1조합 2계통, F₇ 3조합 8계통 등 90조합 221계통을 선발하였다. 선발한 계통 중 만추대이면서 색택이 좋은 파종번호 5007, 5014, 6004, 6005, 6021, 6023, 7001, 7002, 7006, 7007, 7010, 7011, 7015, 7018, 7019, 7021 등 17계통은 생산력검정을 하였다. 이중에서 유망한 7001, 7002, 7011, 7018, 7022 등 5개 계통을 선발하였다.

• 한국BIM학회 논문집
• /
• 제13권3호
• /
• pp.1-11
• /
• 2023

In order to use BIM as a tool for improving the productivity and quality of products in the construction industry, a BIM model must be created from the design stage first. Infrastructure structures such as bridges and tunnels are mainly created based on three-dimensional alignment in the generation of BIM models. Especially, generation of BIM models based on three-dimensional linearity has high task difficulty and algorithms for automating BIM modeling for railway infra structures have been suggested in previous studies. This study improved the BIM modeling automation algorithm of railway infrastructures and developed a system based on the algorithm so that it can be easily used by ordinary users. The system was built as an add-in system of Autodesk's Revit. As an improvement first, it is possible to arrange different libraries for each pattern, enabling various uses. In addition, it can be created models of several members with a single process and the system can automatically places structures that are added periodically, such as Rock Bolt and Fore Polling. Finally, 3D length information and volume for each pattern are automatically calculated for more accurate 3D-based volume calculation. This study contributes to increasing user accessibility by building a BIM modeling automation algorithm into a system. The system is expected to improve the efficiency of BIM modeling creation of linear-based infra structures, including railway infrastructure.

• 사물인터넷융복합논문지
• /
• 제4권2호
• /
• pp.7-11
• /
• 2018

본 논문에서는 기구학을 이용한 이족보행 로봇의 보행패턴 생성방법을 살펴본다. 2족 보행로봇이 3차원 공간상에서 모든 동작 및 보행이 가능하기 위해 필요한 자유도는 각 다리별로 6자유도이다. 따라서 본 논문에서는 로봇의 보행을 위해 간략화된 보행로봇의 구조를 살펴보고 발목의 경로를 설정한 후 기구학을 이용하여 조인트 각도를 파악하여 생성한다. 또한 로봇의 기구 해석을 위해 한쪽 다리의 조인트들에 대해 좌표계를 설정하였다. 조인트 각도를 역기구학을 이용하면 로봇의 보행 패턴을 생성할 수 있다. 최종적으로 발목의 궤적 설정과 이를 통한 보행 패턴 생성 과정을 살펴보기로 한다.