• 한국전기전자재료학회논문지
• /
• 제13권2호
• /
• pp.114-119
• /
• 2000

Etch characteristics of SF6/CI2 electron cyclotron resonance (ECR) plasmas have been investigated. Surface reaction of gas plasma with polysilicon was also analysed using X-ray photoelectron spectroscopy (XPS). At the same time, the relationship between surface reaction and the etched profile of polysilicon was examined using XPS. The etch rate of polysilicon and oxide increases with increasing flow rate of SF6 in the SF6/CI2 gas mixture, and tis selectivity also increase also increase. It was also found that as increasing flow rate of SF6 in the SF6/CI2 gas mixture, the atomic% of chlorine detected at surface region decrease, but F and S contents increase. At the same time, when the mixing ratio of SF6 gas increases, the anisotropy of etched polysilicon is sharply decreased in the 0%~10% range of the SF6 mixing ratio, but is rarely varied in the range over 10%, in spite of the large variations in flow rates. It can be explained that the bonding of S-Si due to SiSx(x$\leq$2) compound formed on the etched surface suppress the formation of Si-Cl and 'or Si-F bonding in the silicon etching.

• 마이크로전자및패키징학회지
• /
• 제8권3호
• /
• pp.63-67
• /
• 2001

최근가지 Pt박막의 식각은 Cl 계열의 가스에 의한 물리적인 스퍼터링 기구에 초점을 맞추어 연구가 진행되어왔으며 F 계열의 가스에 의한 식각 특성은 상당히 미진하였다. 본 연구에서는 ECR(electron cyclotron resonance) 플라즈마 식각 장비를 이용하여 $Cl_2$/Ar 가스와 $SF_{6}$/Ar 가스를 사용하여 Pt 박막의 식각 특성을 연구하였고, $SF_{6}$/Ar 가스의 경우 Pt 박막과 반응하여 휘발성의 식각 부산물을 형성시킬 수 있음을 확인하였다. 그리고 휘발성있는 platinum fluoride 화합물의 형성에 의해 식각률, 식각 측면형상과 표면 거칠기 특성개선도 얻을 수 있었다.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 The IMAPS-Korea Workshop 2001 Emerging Technology on packaging
• /
• pp.110-113
• /
• 2001

ECR(electron cyclotron resonance) 플라즈마 식각 장비를 이용하여 SF$_{6}$/Ar과 Cl$_2$/Ar 플라즈마 가스에 대한 Platinum (이하 Pt) 박막의 식각 특성을 연구하였다. Pt 박막의 경우 Cl$_2$ 가스 혼합물에 대한 식각 특성은 많이 보고가 되어 왔으나 상대적으로 Fluorine 계열의 가스 혼합물에 의한 시각 연구는 미비하였다. 본 연구에서는 SF$_{6}$/Ar과 Cl$_2$/Ar 플라즈마 가스를 이용한 Pt 박막의 식각 특성을 비교 분석하고 각각의 가스와 Pt 박막과의 반응을 분석, 식각 특성을 개선하고자 하였다.

• 한국전기전자재료학회논문지
• /
• 제11권3호
• /
• pp.203-207
• /
• 1998

After etching Al-Cu alloy films using $SiCl_4/Cl_2/He/CHF_3$ plasma, a corrosion phenomenon on the metal surface has been studied with XPS (X-ray photoelectron spectroscopy) and SEM (Scanning electron microscopy). In Al-Cu alloy system, the corrosion occurs rapidly on the etched surface by residual chlorine atoms. To prevent the corrosion, the $SF_6$ plasma treatment subsequent to the etch has been carried out. A passivation layer is formed by fluorine-related compounds on etched Al-Cu alloy surface after $SF_6$ treatment, and the layer suppresses effectively the corrosion on the surface as the RF power of $SF_6$ treatment increases. The corrosion could be suppressed successfully with $SF_6$ treatment in the RF power of 150watts.

• 마이크로전자및패키징학회지
• /
• 제7권3호
• /
• pp.13-17
• /
• 2000

ECR (Electron Cyclotron Resonance) 식각 공정에 따른 층간 절연막 폴리이미드의 전기적 특성에 관하여 연구하였다. 알루미늄 식각시 일반적으로 사용되는 $Cl_2$플라즈마는 폴리이미드의 유전상수 값을 증가시킨 반면에 $SF_{6}$플라즈마의 경우는 높은 식각률과 유전상수 값의 감소를 가져왔다. 폴리이미드의 누설 전류는 ECR 식각 공정 후에 감소되었다. 다중 금속화 구조를 구현하는데 있어 $Cl_2$플라즈마를 사용하여 알루미늄을 식각하고 $SF_{6}$ 플라즈마를 사용하여 폴리이미드를 식각하는 것이 최적일 것으로 판단된다.

• 한국전기전자재료학회논문지
• /
• 제13권1호
• /
• pp.6-12
• /
• 2000

In this study, molybdenum thin films were etched with Cl\ulcorner/(Cl\ulcorner+SF\ulcorner) gas mixing ratio in an magneti-cally enhanced reactive ion etching(MERIE) by the etching parameters such as rf power of 250 watts, chamber pressure of 100 mTorr and B-field of 30 gauss. The etch rate was 150nm/min under Cl\ulcorner/(Cl\ulcorner+SF\ulcorner) gas mixing ratio of 0.25. At this time, the selectivity of Mo to SiO\ulcorner, photoresist were respectively 0.94, 0.05. The surface reaction of the etched Mo thin films was investigated with X-ray photoelectron spectroscopy(XPS). It was analyzed that Mo peaks was mainly observed in Mo-O bonds formed MoO\ulcorner compounds and F was detected in Mo-F and O-F bonds. Cl peaks were detected by the peak of Cl 2p\ulcorner in Cl-Mo bonds of MoCl\ulcorner or MoO\ulcornerCl\ulcorner formulas. Almost all of both Cl and S atoms had been com-bined with Mo, respectively.

• ETRI Journal
• /
• 제21권3호
• /
• pp.16-21
• /
• 1999

After etching Al-Cu alloy films using SiCl4/Cl_2/He/CHF3 mixed gas plasma, the corrosion phenomenon at the grain boundary of the etched surface and a passivation layer on the etched surface with an SF6 plasma treatment subsequent to the etching were studied. In Al-Cu alloy system, corrosion occurs rapidly on the etched surface by residual chlorine atoms, and it occurs dominantly at the grain boundaries rather than the crystalline surfaces. To prevent corrosion, the SF6 gas plasma treatment subsequent to etching was carried out. The passivation layer is composed of fluorine-related compounds on the etched Al-Cu surface after the SF6 treatment, and it suppresses effectively corrosion on the surface as the SF6 treatment pressure increases. Corrosion could be suppressed successfully with the SF6 treatment at a total pressure of 300 mTorr. To investigate the reason why corrosion could be suppressed with the SF6 treatment, behaviors of chlorine and fluorine were studied by various analysis techniques. It was also found that the residual chlorine incorporated at the grain boundary of the etched surface accelerated corrosion and could not be removed after the SF6 plasma treatment.

• 한국결정성장학회지
• /
• 제26권4호
• /
• pp.145-149
• /
• 2016

플라즈마 조성, ICP source power, rf chuck power 등의 공정변수가 GaN epitaxy층의 식각특성에 미치는 영향을 조사하였다. $GaF_x$ 화합물 보다 더 높은 휘발성을 가지는 $GaCl_x$ 식각 생성물 형성이 가능한 $Cl_2/Ar$ 플라즈마가 $SF_6/Ar$ 플라즈마보다 더 높은 식각속도를 나타내었다. 또한, $Cl_2/Ar$ 플라즈마에서 Ar 비중이 증가함에 따라 물리적 식각 기구 활성화로 인해 식각 이방성이 향상됨을 확인하였다. 두 가지 플라즈마 조성 모두에서 ICP source power와 rf chuck power가 증가함에 따라 식각속도가 지속적으로 증가함을 확인하였고, $13Cl_2/2Ar$, 750W ICP power, 400 W rf chuck power, 10 mTorr 조건에서 최고 251.9 nm/min의 식각속도를 확보하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.34-38
• /
• 1999

In this study, molybdenum thin films were etched with the various Cl$_2$/(Cl$_2$+SF$_{6}$) gas mixing ratio in an magnetically enhanced reactive ion etching(MERIE) by the etching parameter such as rf power of 185 watts, chamber pressure of 40 mTorr and B-field of 80 gauss. The etch rate was 150 nm/min under Cl$_2$/(Cl$_2$+SF$_{6}$) gas mixing ratio of 0.25. At this time, the selectivity of Mo to SiO$_2$, photoresist were respectively 0.94, 0.50. The surface reaction of the etched Mo thin films was investigated with X - ray photoelectron spectroscopy (XPS).PS).

• 한국세라믹학회지
• /
• 제40권9호
• /
• pp.886-890
• /
• 2003

단결정 LiNbO$_3$를 helicon wave plasma 방법으로 식각시 bias power와 CF$_4$, HBr, SR$_{6}$가 혼합된 gas 유량에 따른 식각 속도와 rms roughness 값의 특성을 관찰하였다. 식각된 깊이는 surface profiler로 관찰하였으며 rms roughness 값은 Atomic Force Microscopy (AFM)으로 측정하였다. Bias power 증가함에 따라 500W에서 가장 높은 식각 속도와 가장 평탄한 표면형상을 얻을 수 있었으며, CF$_4$, HBr, SF$_{6}$ gas 유량을 각각 10～30 sccm으로 증가시킴에 따라 식각 속도는 CF$_4$, HBr, SF$_{6}$ gas 유량이 10 sccm, 30 sccm, 10 sccm에서 가장 높게 나타났으며, rms roughness 값은 CF$_4$, HBr, SF$_{6}$ gas 유량이 30 sccm, 10 sccm, 30 sccm에서 가장 낮은 표면 조도를 나타내었다.