• Structural Engineering and Mechanics
• /
• 제67권3호
• /
• pp.283-290
• /
• 2018

This paper presents the results of a study that investigated the influence of using recycled coarse aggregate (RCA) and recycled asphalt pavement (RAP) on the properties of pervious concrete (PC). The natural aggregate (NA) was replaced by RCA and RAP in the PC with replacement levels of 0%, 20%, 40%, 60% and 80% by the total weight of NA, respectively. In addition to incorporating RAP and RCA in the same mixes with replacement levels of: (1) 20% RAP and 80% RCA; (2) 60% RAP and 40% RCA; and (3) 80% RAP and 20% RCA. Water permeability, thermal conductivity, density, porosity, void content, and compressive, splitting tensile and flexural strengths were studied in this paper. The results showed that using RCA, RAP, and (RAP-RCA) enhanced the properties of PC in general and improved the mechanical properties significantly in particular. The optimum mix was reported to be the 60% RAP and 40% RCA. Accordingly, the RAP has the potential to be used in PC in order to reduce the negative impact of RAP on the human health and environment.

• Transactions on Electrical and Electronic Materials
• /
• 제15권1호
• /
• pp.41-44
• /
• 2014

Emission properties of the organic light-emitting diodes were investigated with the use of a hole-injection layer of copper(II)-phthalocyanine (CuPc). The manufactured device structure is indium-tin-oxide (ITO) (180 nm)/CuPc (0~50 nm)/N,N'-Bis(3-methylphenyl)-N,N'-diphenylbenzidine (TPD) (40 nm)/tris-(8-hydroxyquinoline) aluminum (III) ($Alq_3$) (60 nm)/Al(100 nm). We investigated the luminescence properties of $Alq_3$ which is affected by the CuPc hole-injection layer. Also, we studied the influence of light-emission properties in the structure of an ITO/CuPc/TPD/$Alq_3$/Al device depending on the several thicknesses of CuPc (0~50 nm) layer. As a result, it was found that the hole injection occurs smoothly in the device with 20 nm thick CuPc layer, and the properties become significantly worse in the device with a CuPc layer thickness higher than 40 nm. We studied the topography and external quantum efficiency depending on the layer thickness of CuPc. Also, we analyzed the electroluminescent characteristics in the low and high-voltage range.

• 한국강구조학회 논문집
• /
• 제29권6호
• /
• pp.435-442
• /
• 2017

모듈러 건축물을 중고층화하기 위해 횡력저항시스템은 반드시 필요한 구조 요소로 10~20층 규모에서 콘크리트 코어는 가장 전형적인 횡력저항시스템으로 알려져 있다. 습식 공법인 콘크리트 코어 공사는 모듈의 오염과 파손 가능성으로 모듈 적층과의 동시 작업이 곤란하다. 이에 모듈 적층과 콘크리트 코어의 동시 시공이 가능한 복합 PC 패널 공법을 개발하였다. 복합 PC 패널은 일정 간격을 두고 웨브가 마주보는 한 쌍의 C형강을 콘크리트 벽체의 상부와 하부에 결합한 구조 부재로 볼트로 접합하여 적층하는 건식 공법으로 콘크리트 코어를 구축할 수 있다. 이 연구에서는 복합 PC 패널이 콘크리트 벽체와 동등한 성능을 갖도록 해석을 통해 상세 개선 과정을 제시하였다.

• 한국터널지하공간학회 논문집
• /
• 제10권1호
• /
• pp.17-24
• /
• 2008

국내에서 대부분 시공되어지고 있는 현장타설 콘크리트 라이닝은 여러 가지가 문제점을 나타내고 있다. 그 중에 특히 라이닝의 균열 발생은 사회적 및 경제적인 문제로까지 제기되고 있으며 라이닝의 미관뿐만 아니라 안정성에도 영향을 미치게 되므로 막대한 보수보강 공사비의 지출을 유발해 국가 예산을 소모시키고 있다. 국내 콘크리트 2차 제품 생산업체의 생산기술은 아직 선진국 수준에 미치지 못하며, 고품질 제품 생산에 있어 가장 중요한 증기양생 방법 또한 규정되어 있지 않은 실정이다. 본 연구에서는 터널용 PC 패널의 증기양생조건 중 전양생시간, 온도상승구배를 달리하여 물리적 특성을 검토하였다. 시험결과, 고강도 PC패널의 전양생시간은 최소 1시간 이상이 바람직하였으며 온도상승구배는 최대 $20^{\circ}C$가 물리 역학적으로 가장 우수한 성능을 나타내었다.

• 경영정보학연구
• /
• 제20권1호
• /
• pp.99-114
• /
• 2018

컴퓨터 보안에서 기술적 대책은 필수적이지만 충분조건은 아니다. 따라서 사용자의 보안행동에 대한 인적 측면에서의 접근 또한 필수적이다. 인적 측면의 하나라고 볼 수 있는 성격은 각 개인의 특징을 나타내는 행동적 특성으로 특정 상황에서 개인이 어떻게 행동할 것인가를 예측하게 해 준다. 본 연구는 보호동기이론의 선행요인으로 성격을 고려하여, 성격특성에 따라서 형성된 보호동기가 PC보안태도에 어떻게 영향을 미치는지 논의해 보고자 한다. 이를 위해 학생 및 직장인 175명을 대상으로 설문조사를 실시하였다. 가설 검증 결과, 성격특성 일부가 보호동기이론의 위협 및 대처평가에 영향을 미쳤고 PC보안태도는 PC보안의도에 영향을 미치는 것으로 확인되었다. 본 연구의 결과가 성격특성에 따른 PC보안의도를 예측하는 데 도움을 줄 수 있다는 점에서, 조직에서는 이를 활용해 교육이나 인사배치 등에 참고할 수 있을 것이라 기대할 수 있다.

• 대한한의학회지
• /
• 제28권2호통권70호
• /
• pp.213-223
• /
• 2007

Objective : Alzheimer's disease (AD) is a geriatric dementia that is widespread in old age. With an aging populace, AD is a looming problem in public health service. Alzheimer's disease is characterized by specific neuronal degeneration in certain areas of the brain. Mutations and abnormal expression of several genes are associated with ${\beta}-amyloid$ deposits and Alzheimer's disease; among them APP, PS1, and PS2, SOD, free radical, ROS. Methods:We studied herbal medicines that have a relationship to brain degeneration. From pre-modern times, although a variety of oriental prescriptions of Aster tataricus have been traditionally utilized for the treatment of AD, their pharmacological effects and action mechanisms have not yet been fully elucidated. Result : Based on morphological observations by phase-contrast microscope, TUNEL assay and MTT in the culture media, $H_20_2-induced$ cell death was significantly inhibited by Aticus. We examined by ROS formation, catalase activity and GSH activity. We studied the protective effect and inhibitory effects of neurotoxicity in $H_20_2-induced$ PC-12 cells by Aticus. Findings from our experiments show that Aticus inhibits apoptosis, which has neurotoxicities and cell damage in PC-12 cells. In addition, treatment with Aticus ($>25{\mu}g/ml$ for 6hrs) partially prevented $H_20_2-induced$ cytotoxicity in PC-12 cells, and induced a protective effect. Conclusion : As the result of this study, in the Aticus group, the apoptosis in the nervous system was inhibited, protected against the degeneration of PC-12 cells by $H_20_2$. Taken together, Aticus exhibited inhibition of $H_20_2-induced$ apoptotic cell death. Aticus was found to induce protective effect on GSH and catalase in PC-12 cells. Based on these findings, Aticus may be beneficial for the treatment of AD.

• 동의신경정신과학회지
• /
• 제20권2호
• /
• pp.85-99
• /
• 2009

Objectives : This study aimed to understand the influence of acupuncture on the human body by comparing changes within human bodies before and after people in normal health are treated with acupuncture at the acupoints HT7 and PC9, which are related to mental functions. Methods : The study was performed from January 3, 2008 to March 5, 2008 on 60 healthy males and females in their 20s. HRV, EEG, skin conductance response, respiration and peripheral skin temperature were measured for 5 minutes before acupuncture simulation was applied to the acupoints HT7 and PC9. During 20 minutes of acupuncture treatment, the same items were continuously measured to determine whether there had been any changes, and they were then measured for 5 minutes after the removal of the acupuncture needles in order to implement a comparative analysis. Results : 1. The HRV measurement showed that in the course of before, during and after acupuncture stimulation, heart rate, HF and HF norm decreased significantly (P<0.05) at HT7. LF, LF norm, and LF/HF ratio increased significantly (P>0.05), while heart rate, HF and HF norm decreased significantly (P<0.05) at PC9. 2. Skin conductance response increased significantly (P<0.05) at PC9 during and after the acupuncture simulation periods, compared with the pre acupuncture period. 3. the peripheral skin temperature increased significantly (P<0.05) both at HT7 and PC9 in the course of before, during and after acupuncture stimulation. 4. Compared with the pre-acupuncture period, respiration rate increased both at HT7 and at PC9 during and after the acupuncture simulation periods, but not in a statistically significance. 5. In the EEG measurement, when compared with the pre-acupuncture period at HT7, mid ${\beta}$ wave decreased significantly (P<0.05) during acupuncture treatment. Compared with the measurements during acupuncture treatment at PC9, low ${\beta}$ wave increased significantly (P<0.05) after the acupuncture needles were removed. Conclusions : When acupuncture treatment is applied at the acupoints HT7 and PC9, the activation of parasympathetic nerves decreases and the activation of sympathetic nerves increases in the HRV measurement. It was determined that PC9 makes the sympathetic nerves become highly activated in a skin conduction response. The effect of stability in the brain wave seemed to bo shown at HT7 than PC9.

• 식물분류학회지
• /
• 제34권3호
• /
• pp.205-220
• /
• 2004

한국산 광의의 붉나무속(Rhus) 6분류군간의 한계를 검토하기 위하여 28집단에 대한 67개의 외부형태학적 형질을 기초로 주성분분석과 군집분석의 수리분류학적 연구를 실시하였다. 47개의 정량형질을 기초로 한 주성분분석 결과에서는, 주성분 1, 2, 3이 전체분산값의 77.9%(주성분1 35.2%, 주성분2 22.5%, 주성분3 20.2%), 또한 20개의 정성형질을 기초로 한 분석결과에서는, 주성분 1, 2, 3은 전체분산에 대해 90.7%(주성분1 37.7%, 주성분2 33.0%. 주성분3 20.0%)를 설명 할 수 있는 것으로 나타났다. 주성분적재값을 기초로 하여 공간배열을 실시한 결과, 조사된 분류군들은 종집단 간에 뚜렷한 한계를 보이며 유집되었다. 또한, 단순유집계수에 의한 군집분석을 수행하여 UPGMA 표현도를 작성한 결과, 각각의 분류군 사이에는 뚜렷한 한계를 보였다. 군집분석 결과, 한국산 광의의 붉나무속 식물의 분류에는 정성적 형질이 유용한 것으로 나타났으며, 수리분류학적 연구는 한국산 광의의 붉나무속 6분류군의 분류학적 한계설정에 매우 유용한 것으로 나타났다.

• 한국산업융합학회 논문집
• /
• 제23권3호
• /
• pp.375-380
• /
• 2020

In this study, we tried to evaluate the mechanical properties of Polycarbonate(PC) and acrylonitrile-butadiene-styrene(ABS) plastic materials, which are frequently used as parts of home appliances and machinery, when repeated impacts were applied. A repeating impact tester for this research was designed and manufactured to apply repetitive impacts. Two types of plastic were repeatedly impacted under a constant load, and a tensile test was performed on the plastic material that was impacted. The tensile strength of PC plastic materials that received impact more than 2000 times was reduced by about 45 % and elongation was reduced by about 10 % when compared to impact free specimens. On the other hand, in ABS plastic, a reduction of tensile strength of about 20 % was observed at about 2,000 impacted specimen, but at about 20,000 repetitive impacted specimen, a tensile strength decrease of about 65 % was observed. And the elongation was reduced by 10 % due to the cyclic harding behavior of the material.

• Computers and Concrete
• /
• 제20권5호
• /
• pp.529-537
• /
• 2017

Excessively elevated temperature can lead to cracks in prestressed concrete (PC) continuous bridge with box girder on the pier top at cement hydration age. This paper presents a case study for evaluating the behavior of PC box girder during the early hydration age using a two-stage computational model, in the form of computer program ANSYS, namely, 3-D temperature evaluation and determination of mechanical response in PC box girders. A numerical model considering time-dependent wind speed and ambient temperature in ANSYS for tracing the thermal and mechanical response of box girder is developed. The predicted results were compared to show good agreement with the measured data from the PC box girder of the Zhaoshi Bridge in China. Then, based on the validated numerical model three parameters were incorporated to analyze the evolution of the temperature and stress within box girder caused by cement hydration heat. The results of case study indicate that the wind speed can change the degradation history of temperature and stress and reduce peak value of them. The initial casting temperature of concrete is the most significant parameter which controls cracking of PC box girder on pier top at cement hydration age. Increasing the curing temperature is detrimental to prevent cracking.