• Journal of the Korean institute of surface engineering
• /
• v.42 no.6
• /
• pp.256-259
• /
• 2009

The wafer surface temperature is an important parameter in the etching process which influences the reaction probabilities of incident species, the vapor pressure of etch products, and the re-deposition of reaction products on feature surfaces. In this study, we investigated all of the effects of substrate temperature on the etch rate of $ZrO_2$ thin film and selectivity of $ZrO_2$ thin film over $SiO_2$ thin film in inductively coupled plasma as functions of $Cl_2$ addition in $BCl_3$/Ar plasma, RF power and dc-bias voltage based on the substrate temperature in range of $10^{\circ}C$ to $80^{\circ}C$. The elements on the surface were analyzed by x-ray photoelectron spectroscopy (XPS).

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.10a
• /
• pp.221-222
• /
• 2009

유도결합 플라즈마 (Inductively Coupled Plasma) 장비를 이용하여 각종 공정조건들에 따른 $TiO_2$의 식각 특성을 연구하였다. $BCl_3$/Ar 가스의 혼합비, 공정 압력 등을 공정 변수들로 정하였다. 공정 변수가 가스 혼합비일 경우 $BCl_3$ 가스의 비율이 25 % 일 경우 높은 식각률을 보였다. 또한 X-ray photoelectron spectroscopy를 이용하여 분석한 결과, $TiO_2$의 식각 메커니즘은 화학적인 영향보다는 물리적인 영향을 더 많이 받는다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.107-107
• /
• 2009

본 연구에서는 중성빔을 이용한 Atomic Layer Etching(ALET) system을 이용하여 $ZrO_2$의 atomic layer etching mechanism에 대하여 연구하였다. Ar neutral beam irradiation dose와 $BCl_3$ gas pressure의 변화에 따라 $ZrO_2$ etch rate와 RMS roughness를 관찰했을 때, Ar neutral beam irradiation dose이 $1.485{\times}10^{16}atoms/cm^2{\bullet}cycle$ 이상이고 $BCl_3$ gas pressure가 0.15mTorr 이상 일 때 $ZrO_2$ etch rate은 $1.07\;{\AA}/cycle$의 일정한 값에서 유지됨을 확인하였다. 그리고 ALET와 ICP Etcher을 통해 $ZnO_2$를 각각 식각하여 physically or chemically damage를 비교한 결과, ALET가 기존의 ICP Etcher system보다 $ZrO_2$ 식각공정에 대해 적은 damage를 받는 것을 ARXPS를 통해 관찰 하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.384-384
• /
• 2010

The surface reaction characteristics of Zinc Oxide (ZnO) in $Cl_2/BCl_3$/Ar gas ratio using inductively coupled plasma system were investigated. It was found that ZnO etch rate shows a non-monotonic behavior with increasing both Ar fraction in $Cl_2/BCl_3$ plasma, RF power, and gas pressure. The maximum ZnO etch rate of 53 nm/min was obtained for $Cl_2$(3 sccm)/$BCl_3$(16 sccm) /Ar(4 sccm) gas mixture. The chemical state of etched surfaces was investigated with X-ray diffraction (XRD) and the etched surface was investigated to the rms by atomic force microscopy (AFM). From these data, the suggestions on the ZnO etch mechanism were made by secondary ion mass spectrometery (SIMS).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.11
• /
• pp.826-830
• /
• 2013

In this paper, we carried out the investigations of both etch characteristics and mechanisms for the $SnO_2$ thin films in $O_2/BCl_3/Ar$ plasma. The dry etching characteristics of the $SnO_2$ thin films was studied by varying the $O_2/BCl_3/Ar$ gas mixing ratio. We determined the optimized process conditions that were as follows: a RF power of 700 W, a DC-bias voltage of - 150 V, and a process pressure of 2 Pa. The maximum etch rate was 509.9 nm/min in $O_2/BCl_3/Ar$=(3:4:16 sccm) plasma. From XPS analysis, the etch mechanism of the $SnO_2$ thin films in the $O_2/BCl_3/Ar$ plasma can be identified as the ion-assisted chemical reaction while the role of ion bombardment includes the destruction of the metal-oxide bonds as well as the cleaning of the etched surface form the reaction products.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.223-223
• /
• 1999

PZT(PbZr1-xTixO3) 박막은 고유전율과 같은 remanent polarization을 가져서 고집적 소자의 커패시터 유전율층 또는 비휘발성 메모리 소자의 제조에 이용되고 있으나, fatigue 와 aging 문제로 인하여 새로운 물질의 개발이 필요한데, 그 대표적으로 연구되고 있는 것이 PMN-PT(Pb(Mg1/3Nb2/3)O-PbTiO3) 이다. 본 실험에서는 sol-gel 법에 의하여 제조된 PMN-PT막을 ICP(Inductively coupled plasma)에 의하여 식각하였고 mask층으로는 PR을 사용하였다. 식각 가스로는 Ar, Cl, BCl를 단독 또는 혼합하여 사용하였으며, 식각 특성을 보기 위하여 RF Power, Substrate bias, Operation pressure, Substrate temperature를 변화시켰다. 식각속도는 stylus profiler를 이용하여 측정하였고, 단면 profile은 scanning electron microscopy (SEM)를 이용하여 관찰하였다. 식각 메커니즘을 규명하고자 식각된 박막의 표면을 X-ray photoelectron spectroscopy (XPS)로 관찰하였고, optical emission spectroscopy (OES)로 플라즈마 특성을 규명하고자 하였다. 식각속도는 Ar 또는 Cl2 플라즈마에 BCl3 가스를 혼합하였을 경우 증가되었고, BCl3 가스를 단독으로 사용하여도 높은 식각속도를 나타내었으며, BCl3의 첨가량이 늘어날수록 PR의 식각속도는 감소하여 높은 선택비를 보였다. 90% BCl3/10%Cl2 플라즈마에서 2800$\AA$/min의 식각속도 그리고 1.37:1의 PR 선택비를 얻을 수 있었다. Power나 기판 bias 증가에 따라 식각속도는 증가하였으나 기판 온도변화에는 민감하지 않았다. BCl3 rich에서의 식각속도 증가와 선택비 증가는 B2O3의 형성에 의한 것으로 생각된다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.114-114
• /
• 2012

Metal-oxide-semiconductor field-effect transistors (MOSFETs)의 critical dimension (CD)가 sub 45 nm로 줄어듬에 따라 기존에 gate dielectric으로 사용하고 있는 SiO2에서 발생되는 high gate leakage current 때문에 새로운 high dielectric constant (k) 물질들이 연구되기 시작하였다. 여러 가지 high-k 물질 중에서, aluminum-oxide (Al2O3)는 높은 dielectric constant (~10)와 전자 터널링 barrier height (~2eV) 등을 가지기 때문에 많은 연구가 되고 있다. 그러나 Al2O3를 anisotropic한 patterning을 하기 위해 주로 사용되고 있는 halogen-based 플라즈마 식각 과정에서 나타나는 Al2O3와 하부 layer간의 낮은 식각 selectivity 뿐만 아니라 표면에 발생되는 defect, stoichiometry modification, roughness 변화 등의 많은 문제점들로 인하여 device performance가 감소하기 때문에 이를 해결하기 위한 많은 연구들이 진행중이다. 따라서 본 연구에서는 실리콘 기판위의 atomic layer deposition (ALD)로 증착된 Al2O3를 BCl3/Ar 중성빔을 이용하여 원자층 식각한 후 식각 특성을 분석해 보았다. Al2O3 표면을 BCl3로 absorption시킨 후 Ar 중성빔으로 desorption 시키는 과정에서 volatile한 aluminum-chlorides와 boron oxychloride가 형성되어 layer by layer로 제거됨을 관찰 할 수 있었다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.4
• /
• pp.164-168
• /
• 2011

Etch selectivities of mask materials to ZnO and $SnO_2$ films were studied in $BCl_3$/Ar and $CF_4$/Ar inductively coupled plasmas for fabrication of nanostructure-based gas sensing layer with high aspect ratios. In $25BCl_3$/10Ar ICP discharges, selectivities of 5.1~6.1 were obtained for ZnO over Ni while no practical selectivity was obtained for ZnO over Al. High selectivities of 7 ~ 17 for ZnO over Ni were produced in $25CF_4$/10Ar mixtures. $SnO_2$ showed much higher etch rates than Ni and a maximum selectivity of 67 was observed for $SnO_2$ over Ni.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.385-385
• /
• 2010

In this work, we have investigated the etching characteristics of $TiO_2$ and selectivity of $TiO_2$ over $SiO_2$ thin films as resistance in ReRAM using the inductively coupled plasma. The etch rate and selectivity were measured by varying the $BCl_3$ addition into Ar plasma. The maximum etchrate was obtained at 110.1nm/min at $BCl_3$/Ar=5sccm/10sccm, 500W for RFpower, -100v for DC-bias voltage, and 2Pa for the process pressure. The etched $TiO_2$ surface was investigated with X-ray photo electron spectroscopy. We explained the etching mechanism in two etch mechanisms, physiclas puttering and chemical reaction.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.3
• /
• pp.164-169
• /
• 2014

We investigated the etching characteristics of $HfAlO_3$ thin films in $O_2/Cl_2/Ar$ and $O_2/BCl_3/Ar$ gas, using a high-density plasma (HDP) system. The etch rates of the $HfAlO_3$ thin film obtained were 30.1 nm/min and 36 nm/min in the $O_2/Cl_2/Ar$ (3:4:16 sccm) and $O_2/BCl_3/Ar$ (3:4:16 sccm) gas mixtures, respectively. At the same time, the etch rate was measured as a function of the etching parameter, namely as the process pressure. The chemical states on the surface of the etched $HfAlO_3$ thin films were investigated by X-ray photoelectron spectroscopy. Auger electron spectroscopy was used for elemental analysis on the surface of the etched $HfAlO_3$ thin films. These surface analyses confirm that the surface of the etched $HfAlO_3$ thin film is formed with nonvolatile by-product. Also, Cl-O can protect the sidewall due to additional $O_2$.