• Korean Chemical Engineering Research
• /
• 제43권6호
• /
• pp.740-744
• /
• 2005

$La(NO_3)_3{\cdot}xH_2O$, $Sr(NO_3)_2$, $Co(NO_3)_2{\cdot}6H_2O$, $Fe(NO_3)_3{\cdot}9H_2O$를 출발물질로 하고 La와 Sr의 몰비를 변화시켜 perovskite형 산화물인 $La_{1-x}Sr_xCo_{1-y}Fe_yO_{3-{\delta}}$ 졸을 제조하였다. 또한, 여러 조건에서 합성된 졸의 특성을 확인하기 위해 viscometer, FT-IR, TG-DTA, XRD 등을 사용하여 분석을 행하였다. 제조된 perovskite형 산화물 졸은 1.16 cp의 평균점도를 나타내었으며 조성에 관계없이 pH 0.5 정도의 강산성을 나타내었다. 용액 중의 La 함량이 많아질수록 동일 부피에서의 용액의 점도가 낮았고, 점도가 급격하게 증가하는 겔화시간이 증가하였다.

• 한국태양에너지학회 논문집
• /
• 제33권2호
• /
• pp.93-100
• /
• 2013

Two-step thermochemical cycle using ferrite-oxide($Fe_2O_4$) device was investigated. The $H_2O$(g) was converted into $H_2$ in the first experiment which was performed using a dish type solar thermal system. However the experiment was lasted only for 2 cycles because the metal oxide device was sintered and broken down. Another problem was that the reaction was taken place mainly on a side of the metal oxide device. The m-$ZrO_2$, which was widely known as a material preventing sintering, was applied on the metal oxide device. The ferrite loading rate and the thickness of the metal oxide device were increased from 10.67wt% to 20wt% and from 10mm to 15mm, respectively. The chemical reactor having two inlets was designed in order to supply the reactants uniformly to the metal oxide device. The second-experiment was lasted for 5 cycles, which was for 6 hours. The total amount of the $H_2$ production was 861.30ml. And cerium oxide($CeO_2$) device was used for increasing $H_2$ production rate. $CeO_2$ device had low thermal resistance, however, more $H_2$ production rate than $Fe_2O_4$ device.

• 생약학회지
• /
• 제27권2호
• /
• pp.123-128
• /
• 1996

From the leaves of Magnolia sieboldii a new aporphine-type alkaloid named magnoporphine was isolated. The structure of magnoporphine was all assigned by $^1H-^1H$COSY, $^1H-^{13}C$ COSY and $^1H-^{13}C$ long range NMR. In addition, costunolide, syringin, syringenin $4-O-{\beta}-cellobioside$ and echinacoside was isolated.

• 한국세라믹학회지
• /
• 제22권3호
• /
• pp.72-76
• /
• 1985

Single crystals of the compound MeI $(LiMoO_4)$ and $Me^I(LiWO_4)$ ($Me^I=K$, Rb, Cs) were synthesized by slow evaporation from aqueous solution and bycooling from melt. The compounds of potassium or rubidium are hygroscopic and they form easily hydrated crystals $Me^I LiMoO_4$.$H_2O$ or $Me^ILiMoO_4$.$H_2O$ or $Me^ILiWO_4$.$H_2O$ from aqueous solution. The structures of these hydrated crystals are each other isotypic and they are built up of distorted layers of $(LiMoO_5)$ or $(LiWO_5)$. There exist two types of tetrahedral framework structures in this group of anhydrous molybdates and tung-states ; tridymite-type and cristobalite-type. $KLiMoO_4$ and $KLiWO_4$ have two types of polymorphic structures where as only the cristobalite-type is found in the Rb-and Cs-compounds. The system $KLiSO_4-KLiMoO_4$ was studied. Two components are almost immiscible but there eixst a narrow area of solid solution on the side of sulfate in the system.

• 대한기계학회논문집B
• /
• 제21권9호
• /
• pp.1105-1114
• /
• 1997

The heat transfer characteristics of free surface water jet impinging normally against a flat uniform heat flux surface were investigated. This deals with the effect of three nozzle configurations (Cone type, Reverse cone type, Vertical circular type) on the local and the average heat transfer. Heat transfer measurements were made for water jet issuing from a nozzle of which exit diameter 8 mm. The experimental conditions investigated are Reynolds number range of 27000 ~ 70000( $V_{O}$=3 ~ 8 m/s), nozzle-to-target plate distances H/D=2 ~ 10, and radial distance from the stagnation point r/D ~ = 0 ~ 7.42. For all jet velocities of H/D=2, the local Nusselt number decreased monotonically with increasing radial distance. However, for H/D from 4 to 10, and for the jet velocity $V_{O}$.geq.7 m/s for Cone type nozzle and $V_{O}$.geq.6 m/s for the other type nozzles, the Nusselt number distributions exhibited secondary peaks at r/D=3 ~ 3.5. For Reverse cone type nozzle and Vertical circular nozzle, the maximum stagnation point heat transfer and the maximum average heat transfer occurs at H/D=8. But for the Cone type nozzle, the maximum stagnation and average heat transfer occurs at H/D=10, 4, respectively. From the optimum nozzle-to-target plate distance, the stagnation and the average heat transfer reveal the following ranking: Reverse cone type nozzle, Vertical circular type nozzle, Cone type nozzle.ozzle.

• 한국수소및신에너지학회논문집
• /
• 제17권1호
• /
• pp.69-74
• /
• 2006

Thick film $H_2$ sensors were fabricated using $SnO_2$ loaded with $Ag_2O$ and $PtO_x$. The composition that gave the highest sensitivity for $H_2$ was in the weight% ratio of $SnO_2 : PtO_x : Ag_2O$ as 93 : 1 : 6. The nano-crystalline powders of $SnO_2$ synthesized by sol-gel method were screen printed with $Ag_2O$ and $PtO_x$ on alumina substrates. The fabricated sensors were tested against gases like $H_2$, $CH_4$, $C_3H_8$, $C_2H_5OH$ and $SO_2$. The composite material was found sensitive against $H_2$ at the working temperature $130^{\circ}C$, with minor interference of other gases. The $H_2$ gas as low as 100 ppm can be detected by the present fabricated sensors. It was found that the sensors based on $SnO_2-Ag_2O-PtO_x$ system exhibited the high performance, high selectivity and very short response time to $H_2$ at ppm level. These characteristics make the sensor to be a promising candidate for detecting low concentrations of $H_2$.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권6호
• /
• pp.782-791
• /
• 1998

This paper presents a computer simulation of five types of triple effect absorption cycles employ-ing the refrigerant absorbent combinations of NH3/LiNO3 low-pressure type NH3/LiNO3+H2O/LiBr binary two-stage type series flow cycle and two types of parallel flow cycle for H2O/LiBr. The absorption systems is investigated through cycle simulation to obtain the system characteristics with the cooling water inlet temperature approach temperature of absorber loss temperature of absorber and chilled water outlet temperature. The most important characteristic temperature of absorber and chilled water outlet temperature. The most important characteristic of NH3/LiNO3 low-pressure type and a NH3/LINO3+H2O/LiBr binary two-stage type is that it obtains a coefficient of performance higher than the sum of the performance coefficients of its part operating independently. As a result of this analysis the optimum designs and operating conditions were determined based on the operating conditions and the coefficient of performance.

• 한국자기학회지
• /
• 제19권6호
• /
• pp.209-215
• /
• 2009

M-type 바륨 페라이트(BaFe12O19)분말을 공침법을 이용하여 합성하였다. 출발물질의 조성은 $Fe^{3+}:\;Ba^{2+}$ 몰 비를 8로 고정하고 $Fe^{3+}$와 $Ba^{2+}$의 상대적인 양을 조절하였다. 열처리 방법과 pH의 차이에 의한 자기적 성질과 결정구조, 입자형상의 변화를 XRD(XRay Diffractometer), FESEM(Field Emission Scanning Electron Microscope), VSM(Vibrating Sample Magnetometer)을 이용하여 조사하였다. pH가 8이고 $Fe^{3+}:\;Ba^{2+}$의 비가 12 : 1.5 일 때 가장 큰 보자력 값을 얻었다. pH가 8일 때는 $Fe^{3+}$와 $Ba^{2+}$의 상대적인 양과 열처리 조건에 따라 보자력과 포화 자화 값의 변화가 크게 나타났다. 이것은 바륨 페라이트로 전이가 안 된 $\alpha$-$Fe_2O_3$ 상 때문이다. pH가 10일 때는 열처리 조건과 $Fe^{3+}$와 $Ba^{2+}$의 양과 상관없이 단일 상 M-type 바륨 페라이트를 얻을 수 있었으며 우수한 자화 값과 보자력을 나타내는 분말을 얻을 수 있었다. $Fe^{3+}$와 $Ba^{2+}$의 비가 13.6 : 1.7일 때 가장 큰 자화 값(55.7 emu/g)을 얻을 수 있었으며, 산소분위기에서 열처리 후 노냉한 분말이 높은 보자력과 자화 값을 나타내었다. FESEM으로 관찰된 입자의 크기는 50~200 nm이었다.

• 한국물환경학회지
• /
• 제27권2호
• /
• pp.194-199
• /
• 2011

This study has been carried out to evaluate the performance of $PbO_2$ electrode for the purpose of degradation of N,N-Dimethyl-4-nitrosoaniline (RNO, indicator of OH radical), generation of ozone and decolorization of Rhodamine B (RhB) in water. The effect of the applied current (0.2~1.2 A), electrolyte type (NaCl, KCl and $Na_2SO_4$), electrolyte concentration (0.0~2.5 g/L) and solution pH (3~11) were evaluated. Experimental results showed that RhB and RNO removal were increased with the increase of current, NaCl dosage and decrease of pH. Ozone generation tendencies appeared with the almost similar to the RhB and RNO degradation, except of solution pH (Ozone generation was increased with increase of pH). Optimum current for RhB degradation and consumption of electric power was 1.0 A. The RhB degradation with Cl type electrolyte were higher than that with the sulfate type. Optimum NaCl dosage for RhB degradation was 1.0 g/L.

• 반도체디스플레이기술학회지
• /
• 제18권2호
• /
• pp.98-102
• /
• 2019

Direct plasma-enhanced atomic layer deposition (PEALD) are widely used for $SiO_2$ and SiON thin film process in current semiconductor industry. However, this exhibits poor step coverage for three-dimensional device structure due directionality of plasma species as well as plasma damage on the substrate. In this study, to overcome this issue, low temperature (< $300^{\circ}C$) $SiO_2$ and SiON thin film processes were studied using inductively coupled plasma (ICP) type remote PEALD with various reactant gases such as $O_2$, $H_2O$, $N_2$ and $NH_3$. It was confirmed that the interfacial properties such as fixed charge density and charge trapping behavior of thin films were considerably improved by hydrogen species in $H_2O$ and $NH_3$ plasma compared to the films grown with $O_2$ and $N_2$ plasma. Furthermore, the leakage current density of the thin films was suppressed for same reason.