• Bulletin of the Korean Chemical Society
• /
• v.16 no.7
• /
• pp.634-641
• /
• 1995

The metal-carbon σ-bond cluster complexes 1-Mn(CO)5-2-R-1,2-C2B10H10 (R=CH3 Ia, C6H5 Ib) have been prepared in good yields from readily available carboranyl lithium complexes, 1-Li+-2-R-1,2-C2B10H10- (R=CH3, C6H5), by direct reaction with (CO)5MnBr. These manganese metal complexes are rapidly converted to the corresponding manganese metal carbene complexes, 1-[(CO)4Mn=C(OCH3)(CH3)]-2-R-1,2-C2B10H10 (R=CH3 IIIa, C6H5 IIIb), via alkylation with methyllithium followed by O-methylation with CF3SO3CH3. The crystal structure of IIIb was determined by X-ray diffraction. Thus, complex IIIb crystallizes in the orthorhombic space group P212121 with cell parameters a=15.5537(5), b=19.0697(5), c=7.4286(3) Å, V=2203.4(1) Å3, and Z=4. Of the reflections measured a total of 3805 unique reflections with F2>3σ(F2) was used during subsequent structure refinement. Refinement converged to R1=0.053 and R2=0.091. Structural studies showed that the manganese atom had a slightly distorted pseudo-octahedral configuration about the metal center with the carbene and ortho-carborane occupying the equatorial plane cis-orientation to each other.

• Korean Journal of Metals and Materials
• /
• v.49 no.10
• /
• pp.797-804
• /
• 2011

In this study, the mechanisms of the three steps (the polymer deposition step, the polymer etching step and the Si etching step) that constitute the Bosch process were investigated. The effects of radicals and ions on each step were quantitatively analyzed by comparing the simulated aspect ratio dependency of the deposition or etch rate with the experimental results. In the polymer deposition step, fluorocarbon polymer is deposited by chemical reactions of $CF_x$ radicals, of which the reaction probability is 0.13. Although the polymer etching step and the Si etching step were conducted under the same conditions, the etching mechanisms of polymer and Si were found to be quite different. In the polymer etching step, both chemical etching and physical sputter-etching contribute to the polymer etching. Whereas, in the Si etching step, Si is chemically etched by F radicals, of which the reactivity is greatly increased by the bombardment of energetic ions.

• Advances in Energy Research
• /
• v.8 no.1
• /
• pp.41-57
• /
• 2022

Electrochemical double-layer capacitors (EDLCs) based on solid polymer electrolytes (SPEs) have gained an immense recognition in the present world due to their unique properties. This study is about preparing and characterizing EDLCs using a natural rubber (NR) based SPE with natural graphite (NG) electrodes. NR electrolyte was consisted with 49% methyl grafted natural rubber (MG49) and zinc trifluoromethanesulfonate ((Zn(CF₃SO₃)₂-ZnTF). It was characterized using electrochemical impedance spectroscopy (EIS) test, dc polarization test and linear sweep voltammetry (LSV) test. NG electrodes were made using a slurry of NG and acetone. EIS test, cyclic voltammetry (CV) test and galvanostatic charge discharge (GCD) test have been done to characterize the EDLC. Optimized electrolyte composition with NR: 0.6 ZnTF (weight basis) exhibited a conductivity of 0.6 x 10^-4 Scm^-1 at room temperature. Conductivity was predominantly due to ions. The electrochemical stability window was found to be from 0.25 V to 2.500 V. Electrolyte was sandwiched between two identical NG electrodes to fabricate an EDLC. Single electrode specific capacitance was about 2.26 Fg^-1 whereas the single electrode discharge capacitance was about 1.17 Fg^-1. The EDLC with this novel NR-ZnTF based SPE evidences its suitability to be used for different applications with further improvement.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2003.05a
• /
• pp.55-55
• /
• 2003

최근 높은 해상도의 평판 디스플레이 장치 특히 차세대 TFT-LCD를 개발하기 위해서는 건식식각공정의 개발이 필수 불가결하며 이는 플라즈마 공정장치의 대면적화가 가능해야 한다. 따라서 산업계는 이러한 제조 조건에 알맞는 대면적 플라즈마 반응기 개발을 추구하고 있다. 이를 위해서는 건식식각공정의 개발이 필수 불가결하며 이를 위해선 플라즈마 공정장 치의 대면적화가 가능해야 한다. 이러한 대면적 공정을 위해서는 낮은 공정압력, 고밀도, 높은 플라즈마 균일도가 요구된다. 또한 이러한 대면적 고밀도 플라즈마에의 적용을 위하여 새로운 유도결합형 플라즈마 소오스의 개발이 진행되고 있으며, 안정적인 300mm웨이퍼 공정을 위하여 여러 형태의 안테나가 연구되어지고 있다. 그러나 차세대 TFT-LCD에 적용 가 능하게끔 기존의 ICP 소오스를 직접적으로 대면적화 하는데 있어서는 안테나의 인덕턴스의 값이 키지며, 유전물질의 두께 증가 및 그에 따른 재료비의 상슴에 의해 그 한계점을 나타 내었다. 본 연구에서는 차세대 TFT-LCD 및 POP 대면적 공정에 적용 가능한 고밀도 플라즈마를 발생시키기 위해서 내장형 유도결합형 선형 안테나를 사용하였다. 내장형 유도결합형 선형 안테나가 가지고 있는 고유의 정전기적 결합효과를 최소화시키기 위해 직사각형모양의 플라즈마 챔버(830mm*1,020mm)에서 영구자석을 사용하였다. 영구자석을 사용하여 외부자 장을 인가하였을 때가, 그럴지 않은 때보다 RF 안테나에 걸리는 코일의 전압을 낮춰주었으며, 영구자석의 배열에 따라 코일의 인덕턴스의 값이 크게 변함을 알 수 있었다. 그리고, 최적화된 자장의 배열은 플라즈마의 이온밀도를 증가시켰으며, 플라즈마 균일도 또한 10% 이 내로 유지됨을 알 수 있었다. 따른 식각 메커니즘에 대하여 알아보고자 하였다. $CF_4/Cl_2$ gas chemistry 에 첨 가 가스로 $N_2$와 Ar을 첨 가할 경 우 텅 스텐 박막과 하부 layer 간의 etch selectivity 증가는 관찰되지 않았으며, 반면에 첨가 가스로 $O_2$를 사용할 경우, $O_2$의 첨가량이 증가함에 따라 etch s selectivity 는 계속적으로 증가렴을 관찰할 수 있었다. 이는 $O_2$ 첨가에 따라 형성되는 WOF4 에 의한 텅스텐의 etch rates 의 감소에 비하여, $Si0_2$ 등의 형성에 의한 poly-Si etch rates 이 더욱 크게 감소하였기 때문으로 사료된다. W 과 poly-Si 의 식각 특성을 이해하기 위하여 X -ray photoelectron spectroscopy (XPS)를 사용하였으며, 식각 전후의 etch depth 를 측정하기 위하여 stylus p pmfilometeT 를 이용하였다.X> 피막이 열처리 전후에 보아는 기계적 특성의 변화 양상은 열역학적으로 안정한 Wurzite-AlN의 석출에 따른 것으로 AlN 석출상의 크기에 의존하며, 또한 이러한 영향은 $(Ti_{1-x}AI_{x})N$ 피막에 존재하는 AI의 함량이 높고, 초기에 증착된 막의 업자 크기가 작을 수록 클 것으로 여겨진다. 그리고 환경의 의미의 차이에 따라 경관의 미학적 평가가 달라진 것으로 나타났다.corner$적 의도에 의한 경관구성의 일면을 확인할수 있지만 엄밀히 생각하여 보면 이러한 예의 경우도 최락의 총체적인 외형은 마찬가지로

• Journal of Acupuncture Research
• /
• v.19 no.2
• /
• pp.189-200
• /
• 2002

Objective : This study is designed to find out the effects of Carthmi-Flos herbal acupuncture theraphy on knee joint with osteoarthritis. Methods : 32 cases of diagnostic patient with the osteoarthritis of knee joints by biochemical method, X-ray analysis and hematologic & serologic tests are divided Carthmi-Flos herbal acupuncture theraphy Group(HAG, 16 peples) and non-Carthmi-Flos herbal acupuncture theraphy Group(NHAG, 16 peoples) at Ik-San Oriental medical hospital in wonkwang university from 1th June 2000 to 31th January 2002. After treatment, we evaluated the effect per each group . Results : 1. In the both HAG and NHAG females were much more than males. Sixty aged patients were the most in the HAG(56.3%) and Seventy aged patients were the most in the NHAG(68.8%). 2. Over 5 years duration of disease in HAG was the most(37.5%). 6 months and over 5 years duration of disease in NHAG was the most(each 31.3%). 3. Two groups were not improved chronic stage(over 5 years). 4. The effect of treatment by condition of patients was follows: After treatment, Grade IV & III were decreased 75.0% in HAG and 56.2% in NHAG 5. In the distribution of treatment progression : 15 cases(93.7%) were recoverd in HAG but 14 cases(87.5%) in NHAG. 6. After comparing the results before and after treatment, we found 93.3% of patients showed recovery at anterior area and 88.9% showed at posterior. Conclusion : These results shows that Carthmi-Flos(CF) herbal acupuncture treatment has good effect on osteoarthritis in knee joint. Futhermore it is possible that CF acupuncture is one of the promising candidates for long-term therapy of osteoarthritis.

• Korean Journal of Human Ecology
• /
• v.16 no.4
• /
• pp.855-875
• /
• 2007

The purpose of this study is to suggest a guideline for outdoor play settings in child care centers. From March to July, 2005, data were collected from 223 directors at child care centers through a structured questionnaire, field measurement survey and non-participatory observation in seventeen child care centers in Seoul and Daejeon. The statistical methods for analysing data were frequency, percentage, mean, $X^2$ and F-test. The results showed as follows: 1)the existing outdoor playground area in child care centers should be expanded more than $4\;m^2$ per child. 2) Outdoor play facilities should be equipped with two structured play sets, a play facility for unstructured play and an adventure facility to make child's various activities possible and to promote child development. 3)flooring materials for outdoor playground should be required to use more than three kinds such as solid coverings (cf. asphalt, standard concrete), wood, lawn, soil or sands. 4)to let children enjoy various activities, outdoor playground area should be composed of various play facilities like indoor play gyms and should be independent but have good connections between play facilities depending on characteristics of play activities. 5)Play spaces of outdoor playground should be composed of physical play space, unstructured and dramatized play space, rest space, space for nature and adventure space. In addition, appropriate play equipments should be provided in respective play space.

• Journal of Korean Physical Therapy Science
• /
• v.7 no.2
• /
• pp.459-474
• /
• 2000

The purpose of this study is to identify the posture correction program as the development of the posture maintenance performance, and search for the more efficient posture correction program. The data analysis was processed by SPSS. The data was analysed with $x^2$-test, t-test, pearson product moment correlation, and stepwise regression analysis. The finding of this study is as follows: There are the homogeneity between two groups was verified on the know ledges CF=.697, df=2, P>.05), self-efficacy(F=.098, df=2, P>.05) about the posture. The developed posture correction program has proved to enhance the posture maintenance performance(knowledge t=1.60, P<.05 ; posture manintenance t=7.69, P<.01). The type of posture correction program showed some significant differences (t=5.62, P<.01) in the accuracy of movement way among the factors of the posture maintenance performance. The posture maintenance performance affected self-efficacy. Therefore, the major conclusion is as follows: The posture correction program was meaningfully effective on developing the posture maintenance, and with practice created accuracy much more on the posture maintenance movement way. The development of the posture maintenance performance affected the increase of self-efficacy about the posture. The self-efficacy has proved so powerful factor to influence on the posture maintenance performance development. So, the posture correction program should be done systematically and continually, and developing the posture maintenance performance should be done with practice. After the education, it should be reinforced through practice, midterm identification and reeducation and motivated with recognizing the accurate posture measurement. And it should be created the correction program to develop the high self-efficacy about the posture. It needs the strategy to educate the correct posture individually, and to spread to the society for healthy life style.

• Membrane Journal
• /
• v.14 no.2
• /
• pp.99-107
• /
• 2004

Carbon molecular sieve (CMS) membranes were prepared by pyrolysis of polyimides having carboxylic acid groups and applied to the hydrogen separation. The polymeric membranes having carboxylic acid groups showed different steric properties as compared with polymeric membranes having other side groups ($-CH_3$ and $-CF_3$) because of the hydrogen bond between the carboxylic acid groups. However, the microporous CMS membranes were significantly affected by the decomposable side groups evidenced from the wide angle X-rat diffraction, nitrogen adsorption isotherms, and single gas permeation measurement. Furthermore, the gas separation properties of the CMS membranes were essentially affected by the pyrolysis temperature. As a result, the CMS membranes Prepared by Pyrolysis of polyimide containing carboxylic acid froups at $700^{\circ}C$ showed the $H_2$ permeability of 3,809 Baller [$1{\times}10^{-10}$ H $\textrm{cm}^$(STP)cm/$\textrm{cm}^2$.s.cmHg], $H_2$/$N_2$, selectivity of 46 and $H_2$/$CH_4$ selectivity of 130 while the CMS membranes derived from polyimide showed the H$_2$ permeability of 3,272 Barrer, $H_2$/$N_2$ selectivity of 136 and $H_2$/$CH_4$ selectivity of 177.

• Korean Journal of Crystallography
• /
• v.5 no.1
• /
• pp.14-19
• /
• 1994

Tlifluoromethyltriphenyl-1,2,4-tioxolane(C2IHlsF303)is triclinic, space group P1 with a=10.477(1), b= 11.056(1), c=9.917(3) A, a=104.7(1), B=122.7(1), r=63.9(1), Z=2, V=867.9(3) A3, Dc=1.43 g/cm3, λ(Mo Ka)=0.71069 A, μ=0.0116 cm-1,F(000)=384, and R=0.067 for 1713 unique observed reflections with I > 1.0 o(I). The structure was solved by direct methods and refined by fall-matrix least-squares refinement with the fixed C-H bond lengths at 0.96 A. Two phenyl rings((2) and (3)) that have the dihydral angle of 106.0°.

• Korean Journal of Agricultural Science
• /
• v.4 no.1
• /
• pp.84-87
• /
• 1977

The distribution of number of ovulation between right and left ovary in superovulated mice were examined. 50 adult female mice of CF#1 strain were used in this study. Superovulation was induced by the subcutaneous injection of 5 IU PMS and followed 48 hours later by the subcutaneous injection of 5 IU HCG. Females a were killed at 24 hours after injection of HCG, and ova in the oviducts were counted under a microscope. The number of ova ovulated from the left and the right ovary were 603 and 594. The number of ova in both sides were found equal frequency by $X^2$ test method. Ovulation occurred more frequently in the left ovary than in the right in 24 females and with equal frequency in both ovaries in 3 females, while more frequently in the right ovary than in the left in 23 females. The possitive correlation was found between right and left ovary.