• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2004.11a
• /
• pp.77-85
• /
• 2004

A significant portion (about 8% in human genome) of mammalian mRNA sequences contains AU(Adenine and Uracil) rich elements or AREs at their 3' untranslated regions (UTR). These mRNA sequences are usually stable. ARE motifs are assorted into three classes. The importance of AREs in biology is that they make certain mRNA unstable. We analyzed the occurrences of AREs and Alu, and propose a possible mechanism on how human mRNA could acquire and keep A REs at its 3' UTR originated from Alu repeats. Interspersed in the human genome, Alu repeats occupy 5% of the 3' UTR of mRNA sequences. Alu has poly-adenine (poly-A) regions at the end that lead to poly -thymine (poly-T) regions at the end of its complementary Alu. It has been discovered that AREs are present at the poly -T regions. In the all ARE's classes, 27-40% of ARE repeats were found in the poly -T region of Alu with mismatch allowed within 10% of ARE's length from the 3' UTRs of the NCBI's reference m RNA sequence database. We report that Alu, which has been reported as a junk DNA element, is a source of AREs. We found that one third of AREs were derived from the poly -T regions of the complementary Alu.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.1
• /
• pp.98-102
• /
• 1995

Popped popcorn generally have a regular popping direction and typical shape. But the reason and mechanism are not clear yet. This experiment was carried out to investigate the shape moulding factor of popped popcorn. Pericarp thickness of tip-cap section of kernels is slightly thicker than that of top section and this fact provides the important information to the reason. Popping starts when the moisture pressure of heated popcorn is increased and reaches at the critical pressure. Therefore, in the same moisture pressure conditions, top sections are bursted first because their pericarp section is thinner than that of tip-cap section. At the very moment tip-cap sections pull down the top sections of peri carp as bi-metal does. So kernels which removed tip-cap section showed the irregular popping shape because they lost the tip-cap pericarp function. How-ever, kernels which removed embryo showed the typical popping shape but their popping volume was small due to emition and shortage of critical moisture pressure. But kernels which removed the whole pericarp and top pericarp were not popped at all because moisture was entirely emitting out of kernels. These results suggest that the shape moulding factor of popped popcorn is the pericarp thickness differences between the top and tip-cap section of kernels.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.271-272
• /
• 2016

본 논문에서는 ESS 구성을 위한 고효율 3-레벨 양방향 인버터를 제안한다. 제안된 인버터는 저주파 레그와 고주파 레그로 구성되어, dc-link 전압과 계통간의 양방향 전력 변환을 수행한다. 제안된 인버터는 3-레벨의 전압을 제공하며 기존 풀브리지 타입의 2-레벨 인버터에 비해 고조파 성분이 적고 필터의 크기를 줄일 수 있다. 또한, 소자들에 걸리는 전압 스트레스가 낮고 동작 중에 스위칭 소자의 바디 다이오드를 사용하지 않기 때문에 도통 손실과 스위칭 손실을 최소화 할 수 있다. 따라서 제안하는 양방향 인버터는 기존 2-레벨 인버터 대비 높은 계통 전류 품질과 높은 효율을 제공한다. 최종적으로 시제품을 제작하여 제안하는 양방향 인버터의 타당성을 검증하였다.

• The Journal of Korean Medicine
• /
• v.18 no.1
• /
• pp.399-410
• /
• 1997

In order to investigate the effects according to the concentration(o, 30, 60 and $120{\mu}g/350{\sim}400g$: saline group, I-group, II-group and III-group) of Labiatae Herba Prunellae Acua-acupuncture on the bilateral loci Taechung(LR3) in hyperthyroidism rats induced by sodium triiodothyronine injection, triiodothyronine(T3), thyroxine(T4), thyroid- stimulating hormone(TSH) and total cholesterol were observed. The results were summarized as follows; 1. The increases of the serum T3 were inhibited significantly by II-group and III-group compared with the control group. 2. The decreases of the serum T4 were inhibited significantly by I-group, II-group and III-group compared with the control group. The I-group and II-group compared with the saline group is significantly different. 3. The decreases of the serum TSH were inhibited significantly by II-group and III-group compared with the control group. The II-group compared with the saline group is significantly different. 4. The decreases of the serum total cholesterol were inhibited significantly by I-group, II-group and III-group compared with the control group. The II-group and III-group compared with the saline group is significantly different.

• Korean Journal of Metals and Materials
• /
• v.46 no.8
• /
• pp.516-523
• /
• 2008

The effect of glass-frit size on microstructural evolution and electrical resistance of conductive silver paste was investigated. Silver paste was prepared by mixing 70 wt% commercial silver powder with $1.6{\mu}m$, 3 wt% Bi based glass-frit and 27 wt% organic vehicle. Two different sizes of glass-frit were obtained by ball-milling of commercial glass-frit ($3{\mu}m$) for 3 and 5 days, which had an average particle size of 1.0 and $0.5{\mu}m$. The smaller glass-frit was melt at low sintered temperature and rapidly spread between the silver particles, which is induced the dense networking among silver particles and strong adhesiveness to $Al_2O_3$ substrate. The silver film with smaller glass-frit sintered at $500^{\circ}C$ showed the small pore size and low porosity resulting in low electrical resistivity of $4{\mu}{\Omega}cm$.

• Progress in Superconductivity and Cryogenics
• /
• v.14 no.3
• /
• pp.1-4
• /
• 2012

Effects of artificial holes on the cooling efficiency of single grain YBCO bulk superconductors were studied. Single grain YBCO bulk superconductors without artificial holes, with six 2.4 mm holes and six holes filled with Bi-Pb-Cd-Sn metal solder were fabricated by a top-seeded melt growth process for powder compacts with/without holes. Simulation for the cooling rate to a liquid nitrogen temperature (77 K) of YBCO samples was carried out using a finite element method (FEM) and the results are compared with the actual cooling rates of samples in liquid nitrogen. The simulated cooling times for the YBCO sample without holes, with six holes and with six holes filled with the metal solder were 80, 47 and 75 sec. respectively, which are similar to the actual cooling times of 84, 52 and 78 sec. estimated for the same samples cooled in liquid nitrogen. The shorter cooling time of the sample with artificial holes are attributed to the increased surface areas associated with the presence of artificial holes. The metal filling into the holes did not give any remarkable effect on the cooling efficiency.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.529-532
• /
• 2003

Quench behavior of resistive superconducting fault current limiters (SFCLs) with various pattern shapes was investigated. The pattern shapes employed were meander, bi-spiral, and spiral shapes of identical line width, gap and margin. SFCLs were fabricated from YBCO thin films grown on two-inch diameter $Al_2O_3$ substrates under the same conditions. Resistance rise of current limiting elements was low at a spiral shape before the whole quench completion, which may act as a disadvantage for simultaneous quench in serial connection between current limiting elements, but the temperature tended to have similar values at higher voltages. On the other hand, bi-spiral shape was severe at insulation level between current limiting lines. When these aspects were considered, we concluded that a meander shape was appropriate to design for a resistive SFCL based on thin films except the concentration of electric field at edge areas of strip lines.

• Journal of the Korean Society of Radiology
• /
• v.6 no.5
• /
• pp.403-408
• /
• 2012

Prompt gamma ray from the natural Indium sample was measured by using an assembly of BGO($Bi_4Ge_3O_{12}$) scintillation detectors in the neutron energy region from 1 to 300 eV. The assembly was composed of pieces of BGO. The spectrometer was composed geometrically as total energy absorption detector. 46-MeV electron linear accelerator which is located at Research Reactor Institute, Kyoto University used for neutron sources from photonuclear reaction. The measurement of the neutron capture resonances was performed to below neutron energy 1 keV, because of strong X-ray effect from photonuclear reaction in Ta target and short distance from the target to an assembly of detector. The distance of neutron flight path is $12.7{\pm}0.02m$. The large neutron capture resonances were measured from 1 to 400 eV. The energy in the capture resonance was compared with the evaluated values. The large resonances were seen in the present measurement. General agreement can be seen between the present measurement and the previous evaluated data in relevant energy region. In the present study, we measured the continues resonance structure above 1 keV neutron energy region. 91.49 eV new neutron capture resonance was found in present measurement.

• Journal of Korean Neurosurgical Society
• /
• v.50 no.5
• /
• pp.409-414
• /
• 2011

Objective : The aim of this study was to evaluate the impact of sodium hyaluronate-sodium carboxymethyl cellulose (HA-CMC), an anti-adhesive material for spinal surgery, on bone fusion by applying it to rat spinal models after lumbar posterolateral fusion. Methods : Lumbar posterolateral fusion was performed at L4-5 using bone graft substitutes in 30 rats. HA-CMC was injected in 15 rats at a dose of 0.2 cc (HA-CMC group) and a saline solution of 0.2 cc in the other 15 rats (control group). Simple radiographs were taken until postoperative 9 weeks with an interval of one week. At postoperative 4 and 9 weeks, three dimensional computed tomography (3D CT) scanning was performed to observe the process of bone fusion. At 9 weeks, bone fusion was confirmed by gross examination and manual palpation. Results : There were no statistically significant differences in bone fusion between the two groups. 3D CT scanning did not reveal significant differences between the groups. The gross examination and manual palpation after autopsy performed at 9 weeks confirmed bone union in 93.3% of both groups. Conclusion : The anti-adhesive material used for spinal surgery did not have adverse effects on spinal fusion in rats.

• Archives of Pharmacal Research
• /
• v.29 no.2
• /
• pp.135-139
• /
• 2006

Activity-guided fractionation of the ethanol extract of the whole plant from Solanum lyratum resulted in the isolation of a new pregnane derivative glycoside, 16-dehydropregnenolone 3-O-${\alpha}$-L-rhamnopyranosyl-($1{\to}2$)-${\beta}$-D-glucopyranosid uronic acid (2), as well as other six known compounds: 16-dehydropregnenolone (1), allopregenolone (3), protocatechuic acid (4), vanillic acid (5), caffeic acid (6), and scopoletin (7). The structures of the isolated compounds were elucidated on the basis of their spectral data and chemical evidences. Compounds 1, 3, 4 were isolated for the first time from this plant. Cytotoxic activities of the isolated compounds were evaluated. Compound 1 exhibited significant cytotoxic activity against A375-S2, HeLa, SGC-7901, and Bel-7402 with $IC_{50}$ values of $13.1{\pm}0.9,\;21.5{\pm}1.0,\;40.2{\pm}0.7$, and $49.8{\pm}1.2\;{\mu}g/mL$, respectively.