• 제목/요약/키워드: $BF_4 ^{-}$ ion

검색결과 37건 처리시간 0.029초

붕소 착물 음이온의 이온쌍 추출 (제2보). $F^-$$HF_2^-$-이온의 영향 (Ion-Pair Extraction of Boron Complex Anions (Ⅱ). Effect of Fluoride and Bifluoride Ions)

  • 송형수;김해동;김강진
    • 대한화학회지
    • /
    • 제27권6호
    • /
    • pp.411-418
    • /
    • 1983
  • HF용액 또는 ${KHF}_2$용액에서 methylene blue의 양이온과 ${BF}_4^-$음이온이 이루는 착물을 1,2-dichloroethane으로 용매추출할 때, 용액 중에 존재하는 $F^-$${HF}_2^-$음이온이 미치는 영향을 분광광도법으로 조사하였다.$F^-$ 이온은 $10^{-2}$의 비교적 진한 농도로 존재하더라도 methylene blue와 이온쌍을 이루지 않으므로 직접적인 영향을 주지 않았다. 그러나 ${HF}_2^-$이온은 ${BF}_4^-$이온과 경쟁적으로 methylene blue와 이온쌍을 이루어 BF4-이온과 함께 추출되는 것으로 보이고 25$^{\circ}C$ 에서 methylene blue-${HF}_2$ 이온쌍의 1,2-dichloroethane용매에 대한 추출상수, $K_{ext}$=8.5를 얻었다.

  • PDF

BF3 생산에 관한 연구 (Study for an BF3 Specialty Gas Production)

  • 이택홍;김재영
    • 한국가스학회지
    • /
    • 제15권3호
    • /
    • pp.74-78
    • /
    • 2011
  • 반도체용 특수가스인 BF3는 반도체 생산공정에서 웨이퍼의 플라즈마 식각 공정과 화학증기증착(CVD : Chemical vapor deposition) chamber 세정공정 등에 사용되며, $BF_3$ 가스는 boron Ion Implant 공정에서 p-type doping을 위한 원료 등으로 사용된다. 본 연구에서는 간단한 공정으로 $NaBF_4$$KBF_4$의 열분해를 통하여 $BF_3$ 가스의 생산에 대해서 연구 하였다.

Electrochemical Properties of Trimethylammonium Tetrafluoroborate in Electrochemical Double-Layer Capacitors

  • Lee, Sooyeon;Lee, Kyung Min;Kim, Ketack
    • Journal of Electrochemical Science and Technology
    • /
    • 제13권2호
    • /
    • pp.254-260
    • /
    • 2022
  • Trimethylammonium tetrafluoroborate (TriMA BF4), consisting of the smallest trialkylammonium ion, was investigated for use in electrochemical double-layer capacitors. Despite the presence of a proton in TriMA+, cycle life tests in acetonitrile (AN) and -butyrolactone (GBL) showed a good capacity retention with a 1.8 V cut-off voltage. The rate of electrolysis of TriMA BF4 in GBL was lower than that in AN because of the lower conductivity in GBL. As a consequence, the cells based on GBL achieved a higher capacitance and longer life than those with AN. TriMA BF4 had a higher conductivity and lower viscosity than the quaternary salt tetraethylammonium tetrafluoroborate in GBL, as well as higher ionic mobility, these factors resulted in a higher rate capability.

이온 주입 공정시 발생한 실리콘 내 결함의 제어를 통한 $p^+-n$ 초 저접합 형성 방법 (Formation of ultra-shallow $p^+-n$ junction through the control of ion implantation-induced defects in silicon substrate)

  • 이길호;김종철
    • 한국진공학회지
    • /
    • 제6권4호
    • /
    • pp.326-336
    • /
    • 1997
  • 트랜지스터의 소오스/드레인 접합 특성에 가장 큰 영향을 미치는 인자는 이온 주입 시 발생한 실리콘 내에 발생한 결합이라는 사실에 착안하여, 기존 소오스/드레인 접합 형성 공정과 다른 새로운 방식을 도입하여 이온 주입에 의해 생긴 결함의 제어를 통해 고품질 초 저접합 $p^+$-n접합을 형성하였다. 기존의 $p^+$소오스/드레인 접합 형성 공정은 $^{49}BF_2^+$ 이온 주입 후 층간 절연막들인 TEOS(Tetra-Ethyl-Ortho-Silicate)막과 BPSG(Boro-Phospho-Silicate-Glass)막을 증착 후 BPSG막 평탄화를 위한 furnace annealing 공정으로 진행된다. 본 연구에서는 이러한 기존 공정과는 달리 층간 절연막 증착 전 저온 RTA첨가 방법, $^{49}BF_2^+$$^{11}B^+$ 을 혼합하여 이온 주입하는 방법, 그리고 이온 주입 후 잔류 산화막을 제거하고 MTO(Medium temperature CVD oxide)를 증착하는 방법을 제시하 였으며, 각각의 방법은 모두 이온 주입에 의한 실리콘 내 결합 농도를 줄여 기존의 방법보 다 더 우수한 양질의 초 저접합을 형성할 수 있었다.

  • PDF

올레핀/파라핀 분리를 위한 poly(ethylene oxide)/AgBF4/Al(NO3)3/Ag2O 복합체 분리막 (Poly(ethylene oxide)/AgBF4/Al(NO3)3/Ag2O Composite Membrane for Olefin/Paraffin Separation)

  • 정수영;강상욱
    • 멤브레인
    • /
    • 제27권4호
    • /
    • pp.313-318
    • /
    • 2017
  • 올레핀/파라핀 분리를 위해 $Poly(ethylene oxide)(PEO)/AgBF_4/Al(NO_3)_3/Ag_2O$ 복합막이 제조되었으며, $Ag_2O$가 도입되었을 때, 복합체 분리막의 초기성능은 선택도 13.7과 투과도 21.7 GPU로 관찰되었다. $PEO/AgBF_4/Al(NO_3)_3$ 분리막의 성능(선택도 13와 투과도 7.5 GPU)에 비해서 초기성능이 증가한 이유는 $Ag_2O$의 첨가로 인한 Ag ion의 활성도 증가로 생각되었다. 하지만 시간에 따른 성능저하 현상이 관찰되었는데 이는 고분자 matrix인 PEO 때문인 것으로 생각되었다. PEO 고분자는 $Ag_2O$ 입자를 안정화 시킬 수 없기 때문에 용매가 증발하면서 $Ag_2O$ 입자끼리 뭉치게 되고, $Ag_2O$가 barrier 역할을 하게 돼서 시간이 지나면 투과도가 감소하는 것으로 분석되었다.

비수용성 전해질내 리튬이온전지용 집전체의 전기화학적 특성 연구: I. Al 집전체 (Electrochemical Studies of Lithium Ion Battery Current Collector in the Aprotic Electrolytes: I. Al Current Collector)

  • 박희구
    • 공업화학
    • /
    • 제10권4호
    • /
    • pp.620-627
    • /
    • 1999
  • 리튬이온전지용 Al 집전체와 비수용성 전해질의 전기화학적 특성을 연구하기 위하여 1 M $LiBF_4$ EC : DMC, 1 M $LiBF_4$ EC : EMC. 1 M $LiPF_6$ EC : DMC. 1 M $LiPF_6$ EC : EMC의 4가지 전해질에서 전압전류 및 임피던스 특성을 조사하였다. Al 집전체는 비교적 넓은 전위창(0.5~4.1 V)에서 안전하지만, 첫 싸이클의 저 전위에서(<2.0 V vs. $Li/Li^{+}$)에서 전해질 내 미량 존재하는 불순물($H_2O$, $O_2$ 등)과 반응하여 계면물질을 생성하며, 리튬염 및 유기용매 또한 일정 전위 범위(<1.5 V vs. $Li/Li^{+}$)에서 Al 집전체와 반응하였다. 특히 전해질내 존재하는 미량의 불순물로 인하여 고 전위에 노출된 Al 집전체의 국부부식이 진행되었다.

  • PDF

X-ray Absorption Spectroscopy of a Poly Sodium 4-Styrensulfonate Intercalated Graphite Oxide Electrode

  • 정혜경;박병규;김재영;노한진
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
    • /
    • pp.393-393
    • /
    • 2011
  • We investigated the electronic structures of a poly sodium 4-styrensulfonate intercalated graphite oxide (PSSGO) electrode and a precursor graphite oxide (GO) electrode using X-ray absorption spectroscopy (XAS). Both electrodes were obtained from electrochemical cells. We found that in the C K-edge XAS spectra the ${\pi}^*$ state intensity originating from the sp2 hybridization of graphite decreases predominantly in the graphite oxide and PSSGO electrodes. This indicates that the negatively charged electrolyte ion (BF4-) is absorbed onto the electrodes and is transferred to the ${\pi}^*$ state of the both electrodes. The analysis of their F K-edge spectra reveals that more BF4- ions were found in the PSSGO electrode than in the graphite oxide electrode. This indicates that more electrolyte ions are absorbed in the PSSGO than in the graphite oxide electrode. We argue that this is the main reason why PSSGO cells have higher capacitance, higher energy density, and higher power density when compared to the graphite oxide cells. We also found that BF4- is the primary working ion that can be inserted into the interlayers of the PSSGO electrode.

  • PDF

BF3LiMA를 단량체로 하는 고체 고분자전해질 합성과 전기화학적 특성 (Synthesis and Electrochemical Properties of Solid Polymer Electrolytes Using BF3LiMA as Monomer)

  • 김경찬;류상욱
    • 전기화학회지
    • /
    • 제14권4호
    • /
    • pp.208-213
    • /
    • 2011
  • 합성된 $BF_3LiMA$ 리튬염을 단량체로 사용하는 고체 고분자전해질을 제조하고 $BF_3LiMA$의 농도가 이온전도도에 미치는 영향 및 전기화학적 안정성을 교류임피던스 측정법과 선형전위주사법을 통하여 평가하였다. 그 결과 $BF_3LiMA$가 12.9 wt%인 고체 고분자전해질에서 $7.71{\times}10^{-6}S\;cm^{-1}$의 가장 높은 $25^{\circ}C$ 이온전도도가 관찰되었으며 이 값을 전후로 이온전도도는 다소 감소하는 경향이 나타났다. 이러한 결과는 저농도의 $BF_3LiMA$에서 발생할 수 있는 리튬염의 부족과 고농도의 $BF_3LiMA$에서는 발생할 수 있는 고분자기질의 유동성 감소가 원인으로 해석된다. 또한 $BF_3LiMA$ 기반의 고체 고분자전해질은 음이온이 고정되어 있는 자기-도핑형 계열로서 $60^{\circ}C$에서 6.0 V까지 우수한 전기화학적 안정성을 보여주었다.

FT-Raman Studies on Ionic Interactions in ${\pi}$-Complexes of Poly(hexamethylenevinylene) with Silver Salts

  • Kim Jong-Hak;Min Byoung-Ryul;Won Jong-Ok;Kang Yong-Soo
    • Macromolecular Research
    • /
    • 제14권2호
    • /
    • pp.199-204
    • /
    • 2006
  • Remarkably high and stable separation performance for olefin/paraffin mixtures was previously reported by facilitated olefin transport through ${\pi}$-complex membranes consisting of silver ions dissolved in poly(hexamethylenevinylene) (PHMV). In this study, the ${\pi}$-complex formation of $AgBF_4,\;AgClO_4\;and\;AgCF_{3}SO_3$ with PHMV and their ionic interactions were investigated. FT-Raman spectroscopy showed that the C=C stretching bands of PHMV shifted to a lower frequency upon incorporation of silver salt, but the degree of peak shift depended on the counter-anions of salt due to different complexation strengths. The symmetric stretching modes of anions indicated the presence of only free ions up to [C=C]:[Ag]=1:1, demonstrating the unusually high solubility of silver salt in PHMV. Above the solubility limit, the ion pairs and higher-order ionic aggregates started to form. The coordination number of silver ion for C=C of PHMV was in the order $AgBF_4$ > $AgClO_4$ > $AgCF_{3}SO_3$, but became similar at [C=C]:[Ag]=1:1. The different coordination number was interpreted in terms of the different transient crosslinks of silver cations in the complex, which may be related to both the interaction strength of the polymer/silver ion and the bulkiness of the counteranion.

자기-도핑형 poly(PEGMA-co-BF3LiMA) 전해질의 합성과 이온전도도에 대한 PEGMA분자량의 영향 (Synthesis of Self-doped Poly(PEGMA-co-BF3LiMA) Electrolytes and Effect of PEGMA Molecular Weight on Ionic Conductivities)

  • 김경찬;류상욱
    • 전기화학회지
    • /
    • 제15권4호
    • /
    • pp.230-235
    • /
    • 2012
  • 분자량이 각각 300(PEGMA300) 및 1100(PEGMA1100) g $mol^{-1}$인 PEGMA와 합성된 $BF_3LiMA$ 리튬염을 이용하여 다양한 조성의 고분자전해질을 제조하고 전기화학적 특성을 평가하였다. 흥미롭게도 AC-impedance 측정법에 의한 상온 이온전도도는 분자량 $300g\;mol^{-1}$로 합성된 액체 고분자전해질에서 $8.54{\times}10^{-7}S\;cm^{-1}$의 값이 얻어진 반면, PEGMA1100으로 합성된 고체상태의 고분자전해질에서 최대 14배 이상 높은 $1.22{\times}10^{-5}S\;cm^{-1}$가 관찰되었다. 이러한 결과는 PEGMA에 ethylene oxide 단위가 5개인 $300g\;mol^{-1}$보다 23개인 $1100g\;mol^{-1}$에서 리튬이온의 배위가 쉽게 일어나기 때문으로 해석된다. 또한 양이온 수율 측정결과 리튬메탈과 $BF_3$간의 반응으로 인해 0.6의 비교적 낮은 값이 나왔지만 초기 3000초 동안에는 0.9 이상의 값이 관찰되어 단일이온 전도체의 특징을 보여주었다.