• 한국세라믹학회지
• /
• 제18권3호
• /
• pp.187-191
• /
• 1981

The effect of additions, $TiO_2$ and $ZrO_2$ as nucleant on the base glass which composition was determined to 0.97 $Li_2O-Al_2O_3-SiO_2$ has been investigated by means of D.T.A., X-ray diffraction and dilatation. $TiO_2$ and $ZrO_2$ as nucleant were added 0.06mole, in which ratios of $TiO_2$/$ZrO_2$ were varied 1/0, 2/1, 1/1, 1/2 and 0/1. The crystalline phases were appeared to $\beta$-spodumene as principal, $\beta$-eucryptite and $ZrO_2$ as secondary, regardless of nucleant variations. The crystallinity of the crystallized glass added $TiO_2$, $ZrO_2$ mixture as nucleant was higher than that of the glass added $TiO_2$ or $ZrO_2$ only. The crystallinity of the glass added $TiO_2$/$ZrO_2$ =1/1 was highest. Increasing the addition of $ZrO_2$, it has been observed that the crystal growing temperature became higher.

• 한국자기학회지
• /
• 제5권1호
• /
• pp.15-20
• /
• 1995

연자성재료인 Mn-Zn 페라이트에 미량의 첨가물로 CaO(0.1 mol%), NiO(0.0~6.0 mol%) 그리고 CoO(0.0~0.8 mol%) 첨가하여 20 종류의 시료를 공침법으로 제조하여, 첨가물의 첨가량에 따른 Mn-Zn 페라이트의 자기적 성질을 연구하였다. NiO, CoO의 첨가량이 증가함에 따라 초기투자율은 감소하고, 반면 Curie 온도는 증가하였다. 보자력$(H_{c})$, 포화자화$(B_{s})$ 및 자기이력손실$(W_{h})$은 NiO의 첨가량이 증가함에 따라 증가하는 것으로 나타났다.

• 한국광물학회지
• /
• 제23권2호
• /
• pp.117-124
• /
• 2010

합성된 슈베르트마나이트를 대상으로 $AsO_4,\;SeO_3,\;CrO_4$ 세 종류의 산화음이온에 대한 흡착실험 및 흡착된 시료에 대하여 열분석을 실시하였다. 흡착 실험 결과 대체로 두 종류의 흡착 특성을 보이며 $AsO_4$와 $SeO_3$의 경우 약 1 mM의 농도까지 대부분의 용액 내 이온들이 100% 흡착된 것으로 나타났으나 그 이상의 농도에서는 흡착이 더 이상 뚜렷하게 증가되지 않는 것을 보여준다. 이는 기존의 $AsO_4$의 흡착 연구 결과에서처럼 $AsO_4$가 슈베르트마나이트 구조 내의 $SO_4$를 치환하기 때문으로 생각되며 $SeO_3$ 역시 $SO_4$를 1 : 1로 치환하기 때문으로 해석된다. 그러나 $CrO_4$의 경우 전 농도 구간에서 다른 산화음이온에 비하여 흡착이 훨씬 적게 일어났다. 열분석은 0.1 mM과 1.25 mM 농도에서 흡착된 시료에 대하여 각각 실시되었다. $AsO_4$로 흡착된 시료의 경우 $AsO_4$가 $SO_4$를 치환하고 있기 때문에 순수한 슈베르트마나이트에서 특징적으로 나타나는 약 $600^{\circ}C$에서의 질량 감소가 훨씬 적으며 약 $1,000^{\circ}C$ 이상에서 $AsO_4$의 분해에 의하여 추가적인 질량감소를 보인다. $SeO_3$로 흡착된 시료의 경우 $SO_4$에 비하여 약간 낮은 온도에서 질량감소가 일어나 좀 더 넓은 온도범위에서 질량감소를 보였다. 이 역시 $SeO_3$의 분해가 $SO_4$ 보다 약간 낮은 온도에서 일어나기 때문으로 사료된다. 그러나 $CrO_4$로 흡착된 시료는 $SO_4$에 의한 질량감소가 역시 적게 나타나나 $CrO_4$가 다른 산화음이온과 같이 고온에서 분해되지 않아 추가적인 질량감소를 보이지 않으며 이를 통하여 $CrO_4$ 역시 $SO_4$를 치환하고 있는 것으로 판단된다. 흡착실험 결과와 종합하여 볼 때 $CrO_4$ 역시 $SO_4$를 치환하며 흡착을 하나 다른 두 산화음이온에 비하여 $SO_4$와의 친화도, 광물 구조 내의 불안정성 등의 원인에 의하여 완전한 1 : 1 치환이 일어나지 않는 것으로 판단된다.

• 한국세라믹학회지
• /
• 제34권7호
• /
• pp.738-746
• /
• 1997

MgO clinker and two kinds of dolomite clinkers with different microstructures and CaO contents were used as starting materials, and the effects of Fe2O3 addition on the properties of MgO and dolomite were investigated in the range of 2 to 8 wt% of Fe2O3 content. Secondary phases contributed to densification of MgO-Fe2O3 and dolomite-Fe2O3 were magnesioferrite and dicalciumferrite, respectively. Sinterabilities of MgO-Fe2O3 and dolomite-Fe2O3 were directly proportional to the amount of secondary phases. Also, sinterability of dolomite itself was dependent on the microstructure of starting material including distribution of CaO and MgO as well as the addition amount of Fe2O3. The flexural strength of MgO-Fe2O3 content was almost constant. The hydration resistance of dolomite with large size of MgO and discontinuous distribution of CaO was higher than that of dolomite with small size of MgO and continuous distribution of CaO. Also, the minimum content of Fe2O3 to prevent they hydration of dolomite was about 4wt%. As increasing Fe2O3 content, the penetration resistance of MgO-Fe2O3 was improved by the increment of magnesioferrite. On the other hand, the penetration resistance of dolomite-Fe2O3 was decreased because of the increment of dicalciumferrite having low melting point.

• 한국세라믹학회지
• /
• 제30권11호
• /
• pp.911-918
• /
• 1993

X-ray photoelectron spectroscopy(XPS) has been empolyed to investigate the structure of PbO-Bi2O3-Ga2O3 glasses. XPS OIS spectra recorded from binary PbO-Ga2O3 glasses clearly showed the presence of two peacks due to bridging and non-bridging oxygens, respectively. Gaussin best-fit deconvolution of the OIS peaks suggested there are substaintial amount of non-bridging oxygens in the structure. Therefore, in addition to the glassforming and charge compensating roles of PbO as suggested from the previous works, role of PbO as network modifiers needs to be considered. Addition of Bi2O3 to binary glasses resulted in the rapid decrease in the amount of non-bridging oxygens as well as in values of FWHM (Full Width at the Half Maximum intensity). It is believed that Bi2O3 form distorted BiO6 octahedra and therefore, work as intermediates. Infrared spectra also suggested that Ga2O3 behave as network-formers in the form of GaO4- tetrahedra.

• 한국IT서비스학회지
• /
• 제20권2호
• /
• pp.13-31
• /
• 2021

Recently, delivery app services based on the O2O platform are increasing rapidly. Accordingly, various studies on O2O service have been conducted. Most of the studies are on consumer behavior in O2O services, and few studies on platform vendors have been conducted. Therefore, this study empirically analyzed the factors affecting the vender's intention to continuous use in the O2O delivery app platform service. Based on prior researches, we set the quality characteristics and network characteristics of the O2O platform as independent variables. The quality characteristics of the O2O platform consisted of system quality, information quality, and service quality, and the O2O platform network characteristics consisted of network externality and platform reputation. Perceived value and switching cost were set as mediated variables, and vender's intention to continuous use was set as dependent variables. For empirical analysis, we conducted a survey targeting vendors of O2O delivery app platform service, and conducted frequency analysis, factor analysis, reliability analysis, and regression analysis. As a result of the analysis, the quality characteristics of the O2O platform, such as system quality, information quality, service quality, and O2O platform network characteristics, showed that network externality and platform reputation had a positive effect on perceived value. The perceived value was found to have a positive effect on the switching cost and the intention to continuous use, and the switching cost was found to mediate the perceived value and the intention to continuous use. This study can contribute to the establishment of platform operation strategy as an empirical analysis on the factors that influence the intention of O2O platform vendors to use the platform continuously.

• 한국세라믹학회지
• /
• 제31권4호
• /
• pp.389-398
• /
• 1994

Calcium aluminate glasses transmit light at relatively long wavelengths up to 6 ㎛ and exhibit also low Rayleigh scattering values. However they have a tendency to get devitrified easily, which limits their use as routine optical materials. Here, the ternary system CaO-Al2O3-SiO2 glasses with low-silica (<30 mol%) were prepared to prevent the devitrification of CaO-Al2O3 glasses and the properties were investigated as functions of composition. The addition of SiO2 to calcium aluminate glasses promoted their stability, which was due to the decrease of non-bridging oxygens and the reconnection of network. As SiO2 was added, density, refractive index, molar volume of oxygens and thermal expansion coefficient decreased continuously. But the glass transition temperatures with increasing SiO2 contents were raised and then lowered. It was postulated that the anomaly was related to the changes of the middle range order as well as the short range order. As the amount of SiO2 in the glass was increased, the IR cut-off values moved to shorter wavelength owing to 'Si-O' antisymetric stretching vibration. The IR cut-off wavelength of the glasses with 5 and 30 mol% SiO2 was 4.90, 4.55 ㎛, respectively.

• 한국전기전자재료학회논문지
• /
• 제13권6호
• /
• pp.472-477
• /
• 2000

Oxides of the form Mn$_{4}$/O$_{4}$-CuO-Co$_{3}$/O$_{4}$-NiO-ZnO present properties that make them useful as power NTC thermistor for current limited. Electrical properties of Mn$_{3}$/O$_{4}$-CuO-Co$_{3}$/O$_{4}$-CuO-Co$_{3}$/O$_{4}$-NiO-ZnO power NTC thermistor such as I-V characteristics tim constant activation energy and heat dissipation coefficient measured as a function of temperature and composition. In Mn$_{4}$/O$_{4}$-CuO-Co$_{3}$/O$_{4}$-NiO-ZnO system with the 5wt% addition of Co$_{3}$/O$_{4}$ it can be seen that resistivity and B-constant were increased as the ratio of ZnO/Mn$_{3}$/O$_{4}$ was increased. Heat dissipation constant, I-V characteristics and time constant showed similar behaviour compared with those of conventional thermistors. In particular resistance change ratio ($\Delta$R) the important factor for reliability varied within $\pm$5% indicating the compositions of these products could be available for power thermistor.

• 한국세라믹학회지
• /
• 제29권3호
• /
• pp.223-231
• /
• 1992

CaO and ZnO were added to Al2O3-SiO2 binary system respectively as flux, then ZrO2 and TiO2 were applied as nucleating agent to these CaO-Al2O3-SiO2 and ZnO-Al2O3-SiO2 ternary system glass. The transparency could not be kept in CaO-Al2O3-SiO2 system glass, whereas the transparent glass-ceramics were prepared in ZnO-Al2O3-SiO2 system glass containing ZrO2 as the nucleating agent. At this time the optimum heating temperatures for the nucleation and the crystal growth were 78$0^{\circ}C$ and 97$0^{\circ}C$. The sizes of the precipitated crystals in the transparent glass-ceramics were below 0.1 ${\mu}{\textrm}{m}$, and their light transmissibilities were more than 80%.

• 한국세라믹학회지
• /
• 제25권2호
• /
• pp.173-183
• /
• 1988

Effects of oxide additives such as MoO3, MnO2 ZrO2 and Fe2O3 on the phase separation and the chemical durability of sodium borosilicate glasses which are the host of waste glasses have been investigated as the basic study on the nuclear-waste immobilization through vitrification. MoO3 and MnO2 were found to be phase separation promotors which increased the temperature as well as catalyzed nucleation and growth for the phase separation of the 10Na2-O-3OB2O3-6OSiO2 (wt%) parent glass within the immiscibility region. The glasses had the interconnected phase-separated structure as the amount of addition increased. On the other hand, ZrO2 and Fe2O3 were inhibitors which showed the reverse effects to the above promotors. It was also found that addition of MoO3 could cause the phase separaton of the 20Na2O-10B2O3-70SiO2(wt%) glass even within the miscibility region. Addition of ZrO2 and Fe2O3 increased the chemical durability of the parent glass within the immiscibility region. Within the miscibility region, however, the addition of 1.96 wt % of MoO3 increased the chemical durability considerably, while MnO2 had little effects.