• Food Science of Animal Resources
• /
• v.29 no.2
• /
• pp.151-156
• /
• 2009

The prevalence of food allergies was investigated using questionnaires with 300 subjects whose ages ranged from 19 to 24 years old and the causative food allergens was analyzed using immunological analysis with serum of the subjects who answered that they have/had food allergy. The questionnaire showed that 11.33% of subjects have/had experience of food hypersensitivity, where the main causative foods were fish, beef, chicken, milk, egg, and pork in order. The meat allergy shared 4.65% (2.33% for beef, 1.66% for chicken, 0.66% for pork) in the prevalence of food allergies. The causative beef allergens were investigated with the serum of 6 subjects who have had beef allergy. Western blots were carried out with the serum of P6 subject who showed a positive reaction to beef extract in ELISA. The two specific bands were detected in beef extract on the PVDF membrane, and no band was detected in extracts of pork and chicken. A calculation of the distance of migration by SDS-PAGE enabled the molecular masses of the two bands to be estimated as 67kDa and 31kDa, respectively. The 67kDa was revealed as bovine serum albumin (BSA) which is one of the important beef allergens as reported previously though an analysis of the N-terminal amino acid sequence. However we could not identify the sequence of 31kDa, probably because they comprised several subunits and were modified proteins such as glycoprotein that were unlikely to be easily degraded by the Edman method. The 31kDa band were dyed with the PAS (periodic acid-schiff reagent), suggesting that it might be a glycoprotein. These results suggested that the 31kDa might be considered as a novel potential beef allergen which is not reported previously, although further studies are needed.

• Journal of Korean Society of Forest Science
• /
• v.75 no.1
• /
• pp.25-31
• /
• 1986

In order to contribute to the Korean tea-plant culture and tea industry by means of increasing the production of tea-plants, I have performed the tissue culture of the organs of the anther, leaf and stem. As for the culture-material, I have used the anther of tea (Thea sinensis) at the tetrad uninucleate microspore stage and used medium of modified Murashige and Skoog as the basal medium supplemented with the growth regulators of NAA and 2, 4-D, yeast, kinetin and others at various concentrations. As for the handling of material, I have followed the common methods of sterilization and microtoming and paraffine imbedding method and observed systematically periodic changes of the microspores in culture. I have divided the leaf, stem and root into segments and sterilized them and used the modified Murashige and Skoog as the basal medium and observed the differentiation of roots and callus and the results are as follows. 1. In case of anther, I have found 2n callus was found in 30 out of 100 segments in M2 medium. 2. The differentiation of roots appeared in 24.5% of total leaf segments cultured and in 50.5% of stem and in 43.9% of root. 3. When the differentiation of stem in different parts was observed, the most frequent differentiation was found in the second part of all the 4 parts. 4. The most frequent formation of callus was noticed from the anther-walls in case of anther culture and from the veins in case of leaf culture. It is concluded that the seedlings of tea-plant could be multiplied most by means of tissue culture of the second part of the tea-plant stem and reduction in the expenditures of tea-plant propagation was possible through tissue culture.

• Korean Journal of Ecology and Environment
• /
• v.36 no.4 s.105
• /
• pp.467-472
• /
• 2003

In this study, an algal fence was developed and applied to reduce the input of algal scum into the water intake facility. The effectiveness of vertical algal fences(overlapped three types of meshes, (312 ${\mu}m$ ${\times}$ 375 ${\mu}m$, 390 ${\mu}m$ ${\times}$ 450 ${\mu}m$, and 0,7 cm ${\times}$ 1cm; vertical depth, 1.5 m; length of fence, about 120 m)) was experimentally tested at a water intake facility (Mulgum, lower Nakdong River). The application of the fence resulted in the statistically significant difference of algal biomass between inside and outside of the fence. According to ANOVA test, chi. a concentration in Day-1showed large difference at each depth of 0, 1, 2 m (0.001> p at each depth, n = 16 respectively). Especially large difference was observed at 0 and 1 m depth. However, the fence was only effective for a short period and its efficiency declined by Day-5after the installation. When better maintenance options for the fence are prepared, e.g. mechanical installation and periodic backwashing of the fence, the performance of algal fence may be sustained. In addition, reliable models for bloom prediction are required to provide an advanced indication of the optimal timing for the installation so that effective operation would be achieved.

• Journal of dental hygiene science
• /
• v.12 no.2
• /
• pp.115-121
• /
• 2012

The aim of this study was to investigate the correlations between the self-reported symptoms of periodontal diseases and the quality of life. This study conducted its questionnaire survey over the subjects of 450 adults who had ever visited dental clinics among the adults of age 35-65 living in Seoul and Gyeonggi-do region from January 7 to March 14, 2010. The data were analyzed using a chi-square test, t-test, binominal logistic regression analysis in the SPSS version 12.0 program. Among the self-reported symptoms of periodontal diseases, 65% of respondents perceived that 'I bleed from the gums in brushing my teeth', which was the most, whereas 18.8% of respondents perceived to 'tooth mobility', which was the least. Self-reported symptoms of periodontal diseases was associated with socio-demographic characteristics such as sex, age, level of education and periodic oral examination, dental scaling(p<0.05). People who perceived the symptoms of periodontal diseases experienced functional limitation, physical pain, psychological discomfort, disability in diverse domains, and social handicap more than the group who did not perceive them(p<0.001). OHIP-14 scores were significantly correlated with sex, bleeding gums, swollen gums and bad breath(p<0.05). This study showed the self-reported periodontal problem had a negative impact on the public's leading their happy life. Therefore, in order to enhance the quality of life in adults, it is necessary to prevent periodontal diseases and reduce the subjective symptoms.

• Journal of Veterinary Clinics
• /
• v.33 no.2
• /
• pp.107-112
• /
• 2016

The objective of this study was to determine potential contributing factors associated with biosecurity level of farrow-to-finish pig farms and to develop a classification tree model to explore how these factors related to each other based on prediction model. To this end, the author analyzed data (n = 193) extracted from a cross-sectional study of 344 farrow-to-finish farms which was conducted between March and September 2014 aimed to explore swine disease status at farm level. Standardized questionnaires with information about basic demographical data and management practices were collected in each farm by on-site visit of trained veterinarians. For the classification of the data sets regarding biosecurity level as a dependent variable and predictor variables, Chi-squared Automatic Interaction Detection (CHAID) algorithm was applied for modeling classification tree. The statistics of misclassification risk was used to evaluate the fitness of the model in terms of prediction results. Categorical multivariate input data (40 variables) was used to construct a classification tree, and the target variable was biosecurity level dichotomized into low versus high. In general, the level of biosecurity was lower in the majority of farms studied, mainly due to the limited implementation of on-farm basic biosecurity measures aimed at controlling the potential introduction and transmission of swine diseases. The CHAID model illustrated the relative importance of significant predictors in explaining the level of biosecurity; maintenance of medical records of treatment and vaccination, use of dedicated clothing to enter the farm, installing fence surrounding the farm perimeter, and periodic monitoring of the herd using written biosecurity plan in place. The misclassification risk estimate of the prediction model was 0.145 with the standard error of 0.025, indicating that 85.5% of the cases could be classified correctly by using the decision rule based on the current tree. Although CHAID approach could provide detailed information and insight about interactions among factors associated with biosecurity level, further evaluation of potential bias intervened in the course of data collection should be included in future studies. In addition, there is still need to validate findings through the external dataset with larger sample size to improve the external validity of the current model.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.2
• /
• pp.120-132
• /
• 2008

Remotely sensed images from a satellite can be applied for detecting and quantifying spatial and temporal variations in terms of landuse & landcover, crop growth, and disaster for agricultural applications. The purposes of this study were to analyze topography using DEM(digital elevation model) and classify landuse & landcover into 10 classes-paddy field, dry field, forest, bare land, grass & bush, water body, reclaimed land, salt farm, residence & building, and others-using Landsat TM images in North Korea. Elevation was greater than 1,000 meters in the eastern part of North Korea around Ranggang-do where Kaemagowon was located. Pyeongnam and Hwangnam in the western part of North Korea were low in elevation. Topography of North Korea showed typical 'east-high and west-low' landform characteristics. Landcover classification of North Korea using spectral reflectance of multi-temporal Landsat TM images was performed and the statistics of each landcover by administrative district, slope, and agroclimatic zone were calculated in terms of area. Forest areas accounted for 69.6 percent of the whole area while the areas of dry fields and paddy fields were 15.7 percent and 4.2 percent, respectively. Bare land and water body occupied 6.6 percent and 1.6 percent, respectively. Residence & building reached less than 1 percent of the country. Paddy field areas concentrated in the A slope ranged from 0 to 2 percent(greater than 80 percent). The dry field areas were shown in the A slope the most, followed by D, E, C, B, and F slopes. According to the statistics by agroclimatic zone, paddy and dry fields were mainly distributed in the North plain region(N-6) and North western coastal region(N-7). Forest areas were evenly distributed all over the agroclimatic regions. Periodic landcover analysis of North Korea based on remote sensing technique using satellite imagery can produce spatial and temporal statistics information for future landuse management and planning of North Korea.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.18 no.3
• /
• pp.145-155
• /
• 2002

The results of the present feasibility study are summarized as follows, 1. The three unit bridge of knitted material and UD fibre reinforcement has both the rigidity and the strength against a vertical occlusal load of 75N. 2. Stress concentration at the junctional area between the bridge and the abutments, i.e. between the pontic and the knitted caps was observed. In the case of the bridge with reinforcement straps, it was partly shown that the concentration problem could be improved by simply increasing the fillet size at the area. Further refining in the surface of the junctional area will be needed to ensure a further improvement in the stress distribution. This will require some trade off in the level of the stress and the available space. A parametric study will help to decide the appropriate size of the fillet. 3. Design refinement is a must to improve the stress distribution and realize the most favourable shape in terms of fabrication. The current straight bar with a constant cross section area can be redesigned to a tapered shape. The curve from the dental arch should also be placed on the pontic design. In accordance with design refinement, the resistance of the bridge frame to other load cases should be evaluated. 4. Although not included in the present feasibility study, it is estimated that bridges of the anterior teeth can be made strong enough with the knitted material without further reinforcement using unidirectional materials. In this regard, a feasibility study on design concepts and stress analysis for 3, 4, 5 unit bridge is suggested. 5. Two types of bridge were analysed in terms of fatigue. The safe life design concept, i.e. fatigue design concept, looks reasonable for the bridge where if cracks should form and propagate there is virtually nothing a dentist to do. The bridge must be designed so that no crack will be initiated during the life span. In the case of crowns, however, if constructed with composite resin with knitted materials, it might be possible to repair them, which in general is impossible for crowns of PFM or of metal. Therefore for composite resin crowns, a damage tolerance design concept can be applied and reasonably higher operational stresses can be allowed. In this case, of course, a periodic inspection program should be established in parallel. 6. Parts of future works in terms of structural viewpoint which need to be addressed are summarized as the following: 1) To develop processing technology to accommodate design concepts; 2) More realistic modelling of the bridge and analysis-geometry and loading condition. Thickness variation in the knitted material, taper in the pontic, design for anterior tooth bridge, the effect of combined loads, etc, will need to be included; 3) To develop appropriate design concepts and design goals for the fibre composite FPD aiming at taking the best advantage of knitted materials, including the damage tolerance design concept; 4) To develop testing method and perform test such as static ultimate load test, fatigue test, repair test, etc, as necessary.

• Journal of Astronomy and Space Sciences
• /
• v.22 no.4
• /
• pp.419-430
• /
• 2005

We have carried out a statistical analysis on solar wind dynamic pressure pulses during geomagnetic storms. The Dst index was used to identify 111 geomagnetic storms that occurred in the time interval from 1997 through 2001. We have selected only the events having the minimum Dst value less than -50 nT. In order to identify the pressure impact precisely, we have used the horizontal component data of the magnetic field H (northward) at low latitudes as well as the solar wind pressure data themselves. Our analysis leads to the following results: (1) The enhancement of H due to a pressure pulse tends to be proportional to the magnitude of minimum Dst value; (2) The occurrence frequency of pressure pulses also increases with storm intensity. (3) For about $30\%$ of our storms, the occurrence frequency of pressure pulses is greater than $0.4\#/hr$, implying that to. those storms the pressure pulses occur more frequently than do periodic substorms with an average substorm duration of 2.5 hrs. In order to understand the origin of these pressure pulses, we have first examined responsible storm drivers. It turns out that $65\%$ of the studied storms we driven by coronal mass ejections (CMEs) while others are associated with corotating interaction regions $(6.3\%)$ or Type II bursts $(7.2\%)$. Out of the storms that are driven by CMEs, over $70\%$ show that the main phase interval overlaps with the sheath, namely, the region between CME body and the shock, and with the leading region of a CME. This suggests that the origin of the frequent pressure pulses is often due to density fluctuations in the sheath region and the leading edge of the CME body.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.2
• /
• pp.148-155
• /
• 2013

Objectives: This study was performed in order to compare the average levels and similarity of occupational exposure limits in South Korea, the U.S., the E.U., Germany, Japan and Finland. Methods: In this study, occupational exposure limits (OELs) for one hundred and seventy seven hazardous substances which are managed in the workplace by the Occupational Safety and Health Act in South Korea were matched with those of other countries. The units for the exposure limits of the same substance (identical CAS number) were unified and the exposure limits in each country were compared with threshold limit values (TLVs) of the American Conference of Governmental Industrial Hygienists (ACGIH) using a geometric mean method. Geometric similarity was calculated to assess the association by each country. Results: The exposure limits according to ACGIH TLVs in South Korea, the E.U., Germany, Japan, and Finland were 148, 37, 76, 90, and 110, respectively. When using TLVs of ACGIH as a standard, the geometric mean ratios of Germany, Finland, the E.U., South Korea, and Japan were 0.79, 0.80, 0.82, 1.19, and 1.27, respectively. Geometric similarity with TLVs of ACGIH was highest in South Korea (0.75) followed by Japan (0.56), the E.U. (0.52), Finland (0.50), and Germany (0.46). Conclusions: Through the comparison of levels of OELs and similarities among South Korea, the U.S., the E.U., Germany, Japan, and Finland, we could better understand the characteristics of occupational exposure limits by country.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.9
• /
• pp.1083-1095
• /
• 1999

최근 처리기와 입출력 시스템의 속도 차이가 점점 커짐에 따라 버퍼 캐쉬의 효율적인 관리가 더욱 중요해지고 있다. 버퍼 캐쉬는 블록 교체 정책과 선반입 정책에 의해 관리되며, 각 정책은 버퍼 캐쉬에서 블록의 가치 즉 어떤 블록이 더 가까운 미래에 참조될 것인가를 결정해야 한다. 블록의 가치는 응용들의 블록 참조 패턴의 특성에 기반하며, 블록 참조 패턴의 특성에 대한 정확한 분석은 올바른 결정을 가능하게 하여 버퍼 캐쉬의 효율을 높일 수 있다. 본 논문은 각 응용들의 블록 참조 패턴에 대한 특성을 분석하고 이를 자동으로 발견하는 기법을 제안한다. 제안된 기법은 블록의 속성과 미래 참조 거리간의 관계를 이용해 블록 참조 패턴을 발견한다. 이 기법은 2 단계 파이프라인 방법을 이용하여 온라인으로 참조 패턴을 발견할 수 있으며, 참조 패턴의 변화가 발생하면 이를 인식할 수 있다. 본 논문에서는 8개의 실제 응용 트레이스를 이용해 블록 참조 패턴의 발견을 실험하였으며, 제안된 기법이 각 응용의 블록 참조 패턴을 정확히 발견함을 확인하였다. 그리고 발견된 참조 패턴 정보를 블록 교체 정책에 적용해 보았으며, 실험 결과 기존의 대표적인 블록 교체 정책인 LRU에 비해 최대 57%까지 디스크 입출력 횟수를 줄일 수 있었다.Abstract As the speed gap between processors and disks continues to increase, the role of the buffer cache located in main memory is becoming increasingly important. The buffer cache is managed by block replacement policies and prefetching policies and each policy should decide the value of block, that is which block will be accessed in the near future. The value of block is based on the characteristics of block reference patterns of applications, hence accurate characterization of block reference patterns may improve the performance of the buffer cache. In this paper, we study the characteristics of block reference behavior of applications and propose a scheme that automatically detects the block reference patterns. The detection is made by associating block attributes of a block with the forward distance of the block. With the periodic detection using a two-stage pipeline technique, the scheme can make on-line detection of block reference patterns and monitor the changes of block reference patterns. We measured the detection capability of the proposed scheme using 8 real workload traces and found that the scheme accurately detects the block reference patterns of applications. Also, we apply the detected block reference patterns into the block replacement policy and show that replacement policies appropriate for the detected block reference patterns decreases the number of DISK I/Os by up to 57%, compared with the traditional LRU policy.