• Journal of the Korean Applied Science and Technology
• /
• v.32 no.3
• /
• pp.536-545
• /
• 2015

This study aimed to investigate the effect of various emulsifiers on the formation of nanoemulsions and their stability properties. MCT (medium chain triglyceride) nanoemulsions were prepared (10 wt% oil, 10 wt% emulsifiers, 20 mM bis-tris, pH 7) with emulsifier such as Tween 20 (Polyoxyethylene(20) sorbitan monolaurate), Almax 3800 (Sorbitan monooleate), soy lecithin, and SSL (sodium stearoyl lactylate) and changes in fat globule size with respect to storage period and stability properties by Turbiscan were investigated. In case of control nanoemulsion with 10 wt% Tween 20, the initial fat globule size was 89.0 nm and 113.4 nm after 28 day of storage and this large increase (ca. 24 nm) was thought to be caused by Ostwald ripening. When Tween 20 was partially replaced with Almax 3800, lecithin and SSL in nanoemulsions, their physicochemical properties (i.e., fat globule size and stability) were changed accordingly. In general, the intial fat globule size was decreased with increasing the concentration of the emulsifiers and the stability against Ostwald ripening increased. The most stable nanoemulsions against Ostwald ripening could be prepared with emulsifiers of Tween 20 and Almax 3800 or lecithin in the ratio of 6:4 (wt%), which was verified with Ostwald ripening rate (${\omega}$). In addition, the emulsion stability by Turbiscan was observed to be consistent with results of changes in fat globule size with storage period.

• Microbiology and Biotechnology Letters
• /
• v.45 no.3
• /
• pp.243-249
• /
• 2017

An agar-degrading bacterium, designated as the GNUM08123 strain, was isolated from samples of red algae collected from the Yongil Bay near East Sea, Korea. The isolated GNUM08123 strain was gram-negative, aerobic, motile, and beige-pigmented, with $C_{16:0}$ (25.9%) and summed feature 3 (comprising $C_{16:1}{\omega}7c/iso-C_{15:0}2-OH$, 34.4%) as its major cellular fatty acids. A similarity search based on the 16S rRNA gene sequence revealed that it belonged to class Gammaproteobacteria and shared 97.7% similarity with the type strain Vibrio chagasii $R-3712^T$. The DNA G+C content of strain $GNUM08123^T$ was 46.9 mol%. The major isoprenoid quinone was ubiquinone-8. The results of DNA-DNA relatedness and 16S rRNA sequence similarity analyses, in addition to its phenotypic and chemotaxonomic characteristics, suggest that strain GNUM08123 is a novel species within genus Vibrio, designated as Vibrio sp. GNUM08123. Agarase production by strain GNUM08123 was induced by agar and sucrose, but was repressed probably owing to carbon catabolite repression by glucose and maltose.

• The Korean Journal of Physiology and Pharmacology
• /
• v.6 no.2
• /
• pp.71-80
• /
• 2002

Previous studies have suggested that brain stem noradrenergic inputs differentially modulate neurons in the paraventricular nucleus (PVN). Here, we compared the effects of norepinephrine (NE) on spontaneous GABAergic inhibitory postsynaptic currents (sIPSCs) in identified PVN neurons using slice patch technique. In 17 of 18 type I neurons, NE $(30{\sim}100{\mu}M)$ reversibly decreased sIPSC frequency to $41{\pm}7%$ of the baseline value $(4.4{\pm}0.8\;Hz,\;p<0.001).$ This effect was blocked by yohimbine $(2{\sim}20{\mu}M),$ an ${\alpha}_2-adrenoceptor$ antagonist and mimicked by clonidine $(50{\mu}M),$ an ${\alpha}_2-adrenoceptor$ agonist. In contrast, NE increased sIPSC frequency to $248{\pm}32%$ of the control $(3.06{\pm}0.37\;Hz,\;p<0.001)$ in 31 of 54 type II neurons, but decreased the frequency to $41{\pm}7$ of the control $(5.5{\pm}1.3\;Hz)$ in the rest of type II neurons (p<0.001). In both types of PVN neurons, NE did not affect the mean amplitude and decay time constant of sIPSCs. In addition, membrane input resistance and amplitude of sIPSC of type I neurons were larger than those of type II neurons tested (1209 vs. 736 $M{\Omega},$ p<0.001; 110 vs. 81 pS, p<0.001). The results suggest that noradrenergic modulation of inhibitory synaptic transmission in the PVN decreases the neuronal excitability in most type I neurons via ${\alpha}_2-adrenoceptor,$ however, either increases in about 60% or decreases in 40% of type II neurons.

• Korean Journal of Materials Research
• /
• v.26 no.10
• /
• pp.513-520
• /
• 2016

The effect of NaOH concentration on the properties of electrolytic plasma processing (EPP) coating formed on AZ61A Mg alloy is studied. Various types of EPP were employed on magnesium alloy AZ61A in a silicate bath with different concentrations of NaOH additive. Analysis of the composition and structure of the coating layers was carried out using an X-ray diffractometer (XRD) and a scanning electron microscope (SEM). The results showed that the oxide coating layer mainly consisted of MgO and $Mg_2SiO_4$; its porosity and thickness were highly dependent on the NaOH concentration. The Vickers hardness was over 900 HV for all the coatings. The oxide layer with 3 g/l of NaOH concentration exhibited the highest hardness value (1220 HV) and the lowest wear rate. Potentiodynamic testing of the 3 g/l NaOH concentration showed that this concentration had the highest corrosion resistance value of $2.04{\times}10^5{\Omega}cm^2$; however, the corrosion current density value of $5.80{\times}10^{-7}A/cm^2$ was the lowest such value.

• Polymer(Korea)
• /
• v.30 no.3
• /
• pp.224-229
• /
• 2006

Quaternary ammonium salt terminated silane was prepared from aminopropyldimethylethoxysilane with methyliodide and ionized 7,7,8,8-tetracyanoquinodimethane $(Li^+TCNQ^-)$ was prepared from TCNQ with methyliodide and lithium iodide. Quaternary ammonium salt silane-TCNQ adduct (ST) was prepared by reacting quaternary ammonium salt terminated silane with $Li^+TCNQ^-$ solution. Poly (dimethylsiloxane)-ST adduct (PST) was prepared by condensation of $\alpha,\omega-hydroxyl$ group terminated poly (dimethylsiloxane) (PDMS) with ST. Maleated polyethylene modified with PDMS (PST-g-MPE) was prepared by melt polymerization of maleated PE and PST in internal mixer and PST-g-MPE/carbon black (CB) and MPE/CB composites were prepared by compounding PST with MPE and PST-g-MPE, respectively. The thermal and mechanical properties of the composites were measured and dispersion characteristics of CB in matrix rosins show that the dispersion of CB in PST-g-MPE/CB was better than that of MPE/CB composite.

• Journal of the Korean Vacuum Society
• /
• v.11 no.4
• /
• pp.194-200
• /
• 2002

MOCVD(metal-organic chemical vapor deposition) copper thin film was annealed at various conditions and the eletrical properties and micro-structures were investigated to find the optimal annealing condition and its effect. Cu thin film annealed at Ar 1 torr, $400^{\circ}C$ had the most improved resistivity of 1.98 $\mu\Omega$cm, and texture; the ratio of $I_{(111)}/I_{(200)}$ was varied from 2.03 to 3.11, and Cu thin film annealed at Ar 1 torr, $450^{\circ}C$ had the largest grain size and uniformity. After the annealing, the EM(electromigration) test was followed to ensure the improved properties by annealing. Compare to other conditions, Cu patterns annealed at Ar 1 torr, $400 ^{\circ}C$ had the most improved properties when it came to the EM resistance, which was due to the low resistivity, the preferential evolution of texture to (111) plane, and the reduction of surface roughness of annealed copper film.

• Clean Technology
• /
• v.19 no.3
• /
• pp.272-278
• /
• 2013

Ethylene propylene diene terpolymer (EPDM) has been usually used for various applications. Bottom ash generated in thermoelectric power plant is hardly recycled. In this study, EPDM/bottom ash/talc composites were prepared by using roll-mill. Bottom ashes obtained from thermoelectric power plant were modified using surfactant. The processing materials used in this study were antioxidant, processing oil, cross-linking co-agent and softening agent. Morphology and physical properties of EPDM composites are investigated by using SEM, TGA, UTM and Rheometer. As a result, when modified ash and talc are added to EPDM composites, the tensile strength and modulus of EPDM composites were remarkably enhanced.

• Korean Chemical Engineering Research
• /
• v.56 no.3
• /
• pp.361-369
• /
• 2018

A manufacturing method has been devised to prepare novel heterogeneous cation exchange membranes by mixing ethylene vinyl acetate (EVA) copolymers with a commercial cation exchange resin. Optimum material characteristics, mixture ratios and manufacturing conditions have been worked out for achieving favorable membrane performance. Ion exchange capacity, electrical resistance, water uptake, swelling ratio and tensile strength properties were measured. SEM analysis was used to monitor morphology. Effects of vinyl acetate (VA) content, melt index (MI) and ion exchange resin content on properties of heterogeneous cation exchange membranes have been discussed. An application test was carried out by mounting a selected membrane in a membrane capacitive deionization (MCDI) system to investigate its desalination capability. 0.92 meq/g of ion exchange capacity, $8.7{\Omega}.cm^2$ of electrical resistance, $40kgf/cm^2$ of tensile strength, 19% of swelling ratio, 42% of water uptake, and 56.4% salt removal rate were achieved at best. VA content plays a leading role on the extent of physical properties and performance; however, MI is important for having uniform distribution of resin grains and achieving better ionic conductivity. Overall, manufacturing cost has been suppressed to 5-10% of that of homogeneous ion exchange membranes.

• The Korean Journal of Ceramics
• /
• v.3 no.4
• /
• pp.263-268
• /
• 1997

RuO$_3$ thin films were deposited on Si(100) substrate at low temperatures by hot-wall metalorganic chemical vapor deposition. Bis(cyclopentadienyl) ruthenium, Ru$(C_5H_5)_2$, was used as the precursor RuO$_2$single phase was obtained at a low deposition temperature of 25$0^{\circ}C$ and the crystallinity of RuO$_2$thin films improved with increasing deposition temperature. RuO$_2$thin films grow perpendicularly to the substrate and show the columnar structure. The grain size of RuO$_2$films drastically increases with increasing the deposition temperature. The resistivity of the 180 nm-thick RuO$_2$thin films deposited at 27$0^{\circ}C$ was 136 $\mu$$\Omega$-cm and increased with decreasing film thickness. SrBi$_2Ta_2O_4$ thin films deposited by rf magnetron sputtering on the RuO$_2$bottom electrodes showed a fatigue-free characteristics up to ~10$^10$ cycles under 5 V bipolar square pulses and the remanent polarization, 2 P$_r$ and the coercive field, 2 E, were 5.2$\mu$C/$\textrm{cm}^2$ and 76.0 kV/cm, respectively, for an applied voltage of 5 V The leakage current density was about 7.0$\times$10$^{-6}$ A/$\textrm{cm}^2$ at 150 kV/cm.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.12
• /
• pp.1133-1138
• /
• 2005

In this study, we have prepared, as the pluse power source, a commercially supplied Li-ion battery with a capacity of 700 mAh and AC resistivity of 60 md at 1 kHz and nonaqeous asymmetric hybrid capacitor composed of an activated carbon cathode and MCMB anode, and have examined the electrochemical characteristics of hybrid capacitor and the pulse performances of parallel connected hybrid capacitor/Li-ion battery source. The nonaqueous asymmetric hybrid capacitors constituted with each stack number of pairs composed of the cathode, the porous separator and the anode electrode were housed in Al-laminated film cell. The 10 stacked hybrid capacitor, which was charged and discharged at a constant current at 0.25 $mA/cm^2$ between 3 and 4.3 V, has exhibited the capacitance of 108F and the lowest equivalent series resistance was 32 $m{\Omega}$ at 1 kHz. On the other hand, the enhanced run time of Li-ion battery assisted by the hybrid capacitor was obtained with increasing of current density and pulse width in Pulse mode. The best improvement, $84\;\%$ for hybrid capacitor/Li-ion battery was obtained in the condition of a 7C-rate pulse (100 msec)/0.5C-rate standby/$10\;\%$ duty cycle.