• ETRI Journal
• /
• v.37 no.1
• /
• pp.107-117
• /
• 2015

This paper presents an energy-efficient (low power) prime-field hyperelliptic curve cryptography (HECC) processor with uniform power draw. The HECC processor performs divisor scalar multiplication on the Jacobian of genus 2 hyperelliptic curves defined over prime fields for arbitrary field and curve parameters. It supports the most frequent case of divisor doubling and addition. The optimized implementation, which is synthesized in a $0.13{\mu}m$ standard CMOS technology, performs an 81-bit divisor multiplication in 503 ms consuming only $6.55{\mu}J$ of energy (average power consumption is $12.76{\mu}W$). In addition, we present a technique to make the power consumption of the HECC processor more uniform and lower the peaks of its power consumption.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.8B
• /
• pp.787-795
• /
• 2002

This paper presents the architecture and the implementation of a 2K/4K/8K-point complex Fast Fourier Transform(FFT) processor for Orthogonal Frequency-Division Multiplexing (OFDM) system. The architecture is based on the Cooley-Tukey algorithm for decomposing the long DFT into short length multi-dimensional DFTs. The transposition memory, shuffle memory, and memory mergence method are used for the efficient manipulation of data for multi-dimensional transforms. Booth algorithm and the COordinate Rotation DIgital Computer(CORDIC) processor are employed for the twiddle factor multiplications in each dimension. Also, for the CORDIC processor, a new twiddle factor generation method is proposed to obviate the ROM required for storing the twiddle factors. The overall 2K/4K/8K-FFT processor requires 600,000 gates, and it is implemented in 1.8 V, 0.18 ${\mu}m$ CMOS. The processor can perform 8K-point FFT in every 273 ${\mu}s$, 2K-point every 68.26 ${\mu}s$ at 30MHz, and the SNR is over 48dB, which are enough performances for the OFDM in DVB-T.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.699-704
• /
• 2003

This paper has been studied about the design of optical transmitter with stable output wavelength in WDM transmission system. The stabilized constant current circuit is designed with deviation less than 10$\mu$A. The temperature control circuit is constructed for the control of internal temperature of laser diode. Also, the wavelength locker is used in optical output. Finally, A/D, D/A converter and micro-processor are used for the control of these.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.2
• /
• pp.27-38
• /
• 1999

This paper proposes a high speed digital neuron processor which uses the residue number system, making the high speed operation possible without carry propagation,. Consisting of the MAC(Multiplier and with Accumulator) operation unit, quotient operation unit and sigmoid function operation unit, the neuron processor is designed through 0.8$\mu$m CMOS fabrication. The result shows that the new implemented neuron processor can run at the speed of 19.2 nSec and the size can be reduced to 1/2 compared to the neuron processor implemented by the real number operation unit.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.416-420
• /
• 1999

This paper describes a 32-bit RISC processor, which has instruction level compatibility with the ARM7 microprocessor. The processor is fully synthesizable, and its performance is evaluated based on 0.35-${\mu}{\textrm}{m}$ CMOS library. This paper focuses on the implementation of the processor and the reliable verification strategy ensuring the complete instruction level compatibility. The processor has successfully verified using a FPGA chip.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05c
• /
• pp.148-152
• /
• 2001

One set of MMIC library has been developed using gate recess etching by spin processor. It is superior than that of dipping Method in the uniformity and the reproducibility of gate recess. A DC characteristics of p-HEMT have a uniform characteristics in the whole wafer than that of dipping method. The low noise p-HEMT with the $0.6{\mu}m$ and $200{\mu}m$ of gate length and gate width, respectivily, has a uniform characteristics of Idss 130~145 mA, conductances 190~220mS/nm, and threshold voltage -0.7~-1.1V in the drain voltage of 2V.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.393-396
• /
• 2009

This paper describes a design of variable-length FFT/IFFT processor for OFDM-based communication systems. The designed FFT/IFFT processor adopts the in-place single-memory architecture, and uses a hybrid structure of radix-4 and radix-2 DIF algorithms to accommodate FFT lengths of $N=64{\times}2^k$ ($0{\leq}k{\leq}7$). To achieve both memory size reduction and the improved SQNR, a two-step conditional scaling technique is devised, which conditionally scales the intermediate results of each computational stage. The performance analysis results show that the average SQNR's of 64~8,192-point FFT's are over 60-dB. The processor synthesized with a $0.35-{\mu}m$ CMOS cell library can operate with 75-MHz@3.3-V clock, and 64-point and 8,192-point FFT's can be computed in $2.55-{\mu}s$ and $762.7-{\mu}s$, respectively, thus it satisfies the specifications of wireless LAN, DMB, and DVB systems.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.8
• /
• pp.40-48
• /
• 2015

This paper presents a processor that performs QR decomposition (QRD) as well as Lattice Reduction (LR) for multiple-input multiple-output (MIMO) systems. By sharing the operations commonly required in QRD and LR, the hardware complexity of the proposed processor is reduced significantly. In addition, the proposed processor is designed based on a multi-cycle architecture so as to reduce the hardware complexity. The proposed processor is implemented with 139k logic gates in a $0.18-{\mu}m$ CMOS process, and its latency is $5{\mu}s$ for $8{\times}8$ MIMO preprocessing both QRD and LR where the operating frequency is 117MHz.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.313-316
• /
• 2002

This paper presents the design and implementation of a crypto processor, a special-purpose microprocessor optimized for the execution of cryptography algorithms. This crypto processor can be used fur various security applications such as storage devices, embedded systems, network routers, etc. The crypto processor consists of a 32-bit RISC processor block and a coprocessor block dedicated to the SEED and triple-DES (data encryption standard) symmetric key crypto (cryptography) algorithms. The crypto processor has been designed and fabricated as a single VLSI chip using 0.5 $\mu\textrm{m}$ CMOS technology. To test and demonstrate the capabilities of this chip, a custom board providing real-time data security for a data storage device has been developed. Testing results show that the crypto processor operates correctly at a working frequency of 30MHz and a bandwidth o1240Mbps.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4A
• /
• pp.447-457
• /
• 2004

This paper proposes a RSA crypto-processor for embedded systems. The architecture of the RSA crypto-processor should be used relying on Big Montgomery algorithm, and is supported by configurable bit size. The RSA crypto-processor includes a RSA control signal generator, an optimal Big Montgomery processor(adder, multiplier). We use diverse arithmetic unit (adder, multiplier) algorithm. After we compared the various results, we selected the optimal arithmetic unit which can be connected with ARM core-processor. The RSA crypto-processor was implemented with Verilog HDL with top-down methodology, and it was verified by C language and Cadence Verilog-XL. The verified models were synthesized with a Hynix 0.25${\mu}{\textrm}{m}$, CMOS standard cell library while using Synopsys Design Compiler. The RSA crypto-processor can operate at a clock speed of 51 MHz in this worst case conditions of 2.7V, 10$0^{\circ}C$ and has about 36,639 gates.