• Korean Chemical Engineering Research
• /
• 제49권5호
• /
• pp.594-599
• /
• 2011

분무열분해 공정을 이용하여 $SrAl_2O_4:Eu$ 녹색 형광체를 제조함에 있어 붕소의 치환, 유기첨가제 및 건조 조절제의 사용에 따른 발광 특성을 조사하였다. Al 자리에 붕소를 치환시켜 줌으로써 결정상은 순수해지고 발광강도는 크게 향상됨을 확인하였다. 휘도 측면에서 붕소의 함량은 약 1 at%로 하는 것이 가장 바람직하였다. 유기첨가제의 함량 변화에 따른 $Sr_{0.9}Al_{1.98}B_{0.02}O_4:Eu_{0.1}$ 형광체의 휘도 변화를 조사한 결과 0.2M을 사용했을 때 가장 높은 휘도를 얻었다. 유기첨가제와 함께 건조 조절제로 DMF 0.5M을 함께 사용함으로써 $Sr_{0.9}Al_{1.98}B_{0.02}O_4:Eu_{0.1}$ 형광체의 휘도는 약 172% 향상되었다. XRD 분석 결과에 의하면 사용한 유기첨가제와 DMF의 사용은 $Sr_{0.9}Al_{1.98}B_{0.02}O_4:Eu_{0.1}$ 형광체의 결정상 변화 없이 결정성을 크게 향상시켰다. 유기 첨가제만을 사용할 경우 형광체의 표면적은 커졌지만 DMF를 함께 사용함으로써 현저히 줄어들었다. 따라서 유기첨가제와 DMF를 동시에 사용하여 합성한 형광체의 휘도가 크게 향상된 것은 결정성 증가와 표면적 감소에 기인한 것이라고 결론지었다.

• 한국세라믹학회지
• /
• 제35권7호
• /
• pp.665-670
• /
• 1998

Ferroelectric anomaly in PbO-{{{{ { {B }_{2 }O }_{3 } }}-{{{{ {TiO }_{3 } }}-BaO glasses which is observed in DAT measurements was in-vestigated together with the effect of BaO content on the shift of Cuire temperature. The temperature where the ferroelectric anomaly apperars on cooling in DTA decreased in proportion with increasing BaO content,. For as-crystallized samples the ferroelectric anomaly was not observed on heating but on cooling whilist for powder samples leached chemically from the crystallized samples both endothermic and ex-otehrmic peaks were observed. This fact suggests that the appearance of the ferroelectric anomaly in DAT largely depends on glassy phases surrounding individual {{{{ {PbTiO }_{3 } }} crystals rather than effects of grain size and crystallinity.

• Journal of the Korean Wood Science and Technology
• /
• 제46권5호
• /
• pp.511-526
• /
• 2018

본 연구에서는 국산 참오동나무재의 열처리에 의한 재질특성의 변화를 조사하였다. 비교를 위하여 은사시나무와 소나무재의 열처리 특성을 조사, 검토하였다. 세 공시수종의 목재시험편을 $160^{\circ}C$, $180^{\circ}C$, $200^{\circ}C$ 및 $220^{\circ}C$의 전기로 내에서 2시간 열처리 후, 재색변화($L^*a^*b^*$), 밀도, 중량감소율 및 셀룰로오스의 상대결정화도를 측정하였다. 재색변화 측정결과, 명도($L^*$)는 세 공시수종 목재 모두 $200^{\circ}C$ 이상에서 크게 감소하였다. 참오동나무재와 은사시나무재의 적-녹색도($a^*$)와 황-청색도($b^*$)는 열처리 온도증가에 따른 차이는 거의 없었으나, 소나무재의 $b^*$는 $200^{\circ}C$ 이후 감소하였다. 참오동나무재의 재색변화량(${\Delta}E^*$)은 $160^{\circ}C$ 열처리에서는 거의 없었고 $180^{\circ}C$ 이상에서 크게 나타났으나, 은사시나무와 소나무재는 $160^{\circ}C$에서도 재색변화가 크게 나타났다. 참오동나무재의 밀도는 $160{\sim}180^{\circ}C$ 열처리에서는 거의 변화가 없었고, 중량감소율은 참오동나무재가 가장 크게 나타났다. 열처리온도 증가에 따라 세 수종의 목재의 중량감소율과 상대결정화도는 증가하였으나 밀도는 다소 감소하였다. 결론적으로 참오동나무재는 색변화 온도, 중량감소율 및 상대결정화도 증가량이 비교수종 목재와 다른 특성을 나타났다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.145-147
• /
• 2000

The secondary electron emission coefficient y of MgO single crystal according to the gas mix-ture ratio of Xe, $N_2$ to Ne have been investigated by $\gamma$-focused ion beam system. It is found that the MgO single crystals of (111) crystallinity has the highest $\gamma$ for operating Ne(Xe) ions ranging from 50eV to 200eV throughout this experiment. And it is found that the $\gamma$ for gas mixtures are much smaller than pure Ne ions.

• Macromolecular Research
• /
• 제14권3호
• /
• pp.261-266
• /
• 2006

Blends of silicone rubber (VMQ) and liquid crystalline polymer (LCP) were prepared using a melt blending technique in the presence and absence of glass fiber and coupling agents. The effect of glass fiber and coupling agents on the thermal, dynamic mechanical, morphological pro-perties and cure characteristics of VMQ/LCP blends were studied. The vinyl silane coupling agent showed a significant effect on the above mentioned properties of VMQ/LCP blends by reacting at the interface between VMQ and LCP. The viscosity of the VMQ/LCP blends decreased with the addition of a coupling agent. A substantial improvement in storage modulus of VMQ/LCP blends was observed in the presence of glass fiber and coupling agents. However, as a coupling agent vinyl silane proved to be better than amine for the VMQ/LCP-glass-containing blends. The thermal stability of the pure silicone rubber was higher than those of the blends. This high thermal stability of silicone rubber was attributed to the Si-O-Si bonds. However, the thermal stability of the blends decreased further in the presence of a coupling agent, possibly due to a decrease in blend crystallinity.

• 미생물학회지
• /
• 제23권1호
• /
• pp.25-33
• /
• 1985

Cellulomonas flavigena KIST 321이 생산하는 균체외 cellulose 분해효소를 gel filtration법과 ion-exchange chromatography법으로 3종의 다른 효소를 분리하여 이들을 A, B, 및 C 효소로 명명하였다. 분리된 각 효소를 결정적 기질에 처리하여 일어나는 기질의 구조변화를 적회전 분광법과 X-ray crystallography법으로 측정하여 다음 결론을 얻었다. B효소는 결정성 cellulosem이 구성단위인 glucopyranose의 불안정화로 그 결정도를 감소시키는 $C_1$형의 효소이며 A 및 C 효소는 $C_x$형의 효소로 B 효소의 반응생성물에 작용하여 glucose를 생산하였다. 이들 각 효소의 작용에서 본균의 cellulase의 작용기작을 고찰하였다.

• 한국재료학회지
• /
• 제24권9호
• /
• pp.465-468
• /
• 2014

The crystallization effects of boron (B) powder on the phase, full width at half maximum (FWHM) values, and critical properties were investigated for in-situ reacted $MgB_2$ bulk superconductors. The semi-crystalline B powder was heat-treated at different temperatures of 1000, 1300 and $1500^{\circ}C$ for 5 hours in an Ar atmosphere. Then, using as-received and heat-treated B powders, the $MgB_2$ samples were prepared at $600^{\circ}C$ for 40 hours in an Ar atmosphere. As the heat-treatment temperature of the B powder increased, both the particle size of the B powder and crystalline phase increased. In the case of $MgB_2$ samples using B powders heat-treated at above $1300^{\circ}C$, unreacted magnesium (Mg) and B remained due to the improved crystallinity of the B powder. As the heat-treatment temperature of B powder increased, the critical current density of $MgB_2$ decreased continuously due to the reduction of grain boundary density and superconducting volume caused by unreacted Mg and B.

• 센서학회지
• /
• 제28권6호
• /
• pp.360-365
• /
• 2019

A polyvinylidene fluoride (PVDF)-based film speaker is successfully fabricated with enhanced bass sound by incorporating buckled nanospring carbon nanotubes (NS-CNTs) as fillers. Various concentrations up to 1-7 wt% of uniformly dispersed buckled NS-CNTs are loaded to increase the beta (β)-phase fraction, crystallinity, and dielectric constant of the speaker, and this results in the bass part enhancement of about 19 dB full scale (dBFS) at 7 wt% filler loading of the piezoelectric film speaker.

• 한국분말재료학회지
• /
• 제26권5호
• /
• pp.432-436
• /
• 2019

This study demonstrates the effect of addition of Fe particles of different sizes on the critical properties of the superconductor $MgB_2$. Bulk $MgB_2$ is synthesized by ball milling Mg and B powders with Fe particles at $900^{\circ}C$. When Fe particles with size less than $10{\mu}m$ are added in $MgB_2$, they easily react with B and form the FeB phase, resulting in a reduction in the amount of the $MgB_2$ phase and deterioration of the crystallinity. Accordingly, both the critical temperature and the critical current density are significantly reduced. On the other hand, when larger Fe particles are added, the $Fe_2B$ phase forms instead of FeB due to the lower reactivity of Fe toward B. Accordingly, negligible loss of B occurs, and the critical properties are found to be similar to those of the intact $MgB_2$.

• 한국세라믹학회지
• /
• 제46권6호
• /
• pp.708-712
• /
• 2009

ITO films were achieved by sintering at $500{\sim}550{^{\circ}C}$. This was possible by inducing a seeding effect on an ITO sol by producing crystalline ITO nanoparticles in situ during heat treatment. Two kinds of ITO sols (named ITO-A and ITO-B) were prepared at 2.0 wt% from indium acetate and tin(IV) chloride in different mixed solvents. The ITO-A sol showed a high degree of crystallinity of ITO without any detectable Sn$O_2$ on XRD at $350{^{\circ}C}$/1 h, but the ITO-B sol showed a small amount of Sn$O_2$ even after annealing at $600{^{\circ}C}$/1 h. The 10 wt% ITO-A//ITO-B showed the sheet resistance of 3600$\Omega$/□, while the ITO-B sol alone showed 5200 $\Omega$/□ by sintering at $550{^{\circ}C}$ for 30 min. Processing parameters were studied by TG/DSC, XRD, SEM, sheet resistance, and visible transmittance.