• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.21-21
• /
• 2010

AISI 316L 용접금속의 크롬/니켈 당량비에 따른 시그마상의 영향을 알아보기 위하여 응고모드가 다른 3종류의 플럭스 코어드 와이어를 제작하였다. AISI 316L 시편에 FCAW 프로세스를 적용한 용접재를 $650^{\circ}C$, $750^{\circ}C$, $850^{\circ}C$, $950^{\circ}C$에서 각 각 1H, 5H, 24H, 72H동안 열처리하였다. 크롬/니켈 당량비가 높을수록 즉, 크롬의 함량이 높아질수록 $\delta$-페라이트 함량은 증가하였으며, $\delta$-페라이트는 고온에서 시그마상으로 변태되었다. $\delta$-페라이트는 $650^{\circ}C$에서 가장 느리게 분해되었으며 $850^{\circ}C$에서 가장 활발히 분해되었다. 용접부의 특성상 크롬과 니켈 등의 합금원소에 의하여 응고온도범위가 넓어져 $950^{\circ}C$에서도 시그마상이 석출되었으며, 5시간 이상 유지 시 구형으로 존재하였다. 충격시험 시 시그마상에 의해 취약해진 inter-dendrite 를 따라 파면이 형성되었으며, $-100^{\circ}C$이하의 극저온에서는 시그마상의 양과 무관하게 충격흡수에너지는 0에 가까워졌다. 하지만 3%미만의 $\delta$-페라이트를 함유하는 AF모드에서 발생한 DDC와 미량의 시그마상은 충격흡수에너지에 결정적인 영향을 미치지 않았다.

• Applied Biological Chemistry
• /
• v.40 no.6
• /
• pp.556-560
• /
• 1997

The removal efficiency of COD and the production of ${\delta}-aminolevulinic$ acid (ALA) were concurrently investigated for both purifying the soybean curd wastewater of high BOD and utilizing the wastewater as a renewable substrate of ALA production using Rhodobacter capsulatus KK-10. Its wastewater was a favorable media for the growth of photosynthetic bacteria in terms of its environmental characteristics having COD/BOD rate of 0.98, ratio of BOD : N : P=100 : 6 : 4, BOD/N ratio of 17.2, lactic acid of 1,080 ppm. Its COD value wastewater was decreased to 94% and dry cell weight was approached to about 1.2 g/l after cultivation of the photosynthetic bacteria for 4 days. By the addition of 15 mM levulinic acid (LA) into the wastewater at the middle log phase of cell growth, the amount of ALA secreted was 55 mg/l. The ALA production was considerably increased to 114 mg/l under the cultural condition of 15 mM supplementations of glycine and succinate with LA at the same period. Furthermore the maximum ALA production of 120 mg/l and COD removal efficiency of 92% were accomplished in the soybean curd wastewater enriched with one addition of 15 mM LA and three serial additions 15 mM ALA precursors.

• Journal of Environmental Science International
• /
• v.22 no.11
• /
• pp.1433-1441
• /
• 2013

The adsorption ability of wood-based activated carbon to adsorb methylene blue (MB) and crystal violet (CV) from aqueous solution has been investigated. Adsorption studies were carried out on the batch experiment at different initial MB and CV concentrations (MB=150 mg/L~400 mg/L, CV=50 mg/L~350 mg/L), contact time, and temperature. The results showed that the MB and CV adsorption process followed the pseudo-second-order kinetic and intraparticle diffusion was the rate-limiting step. Adsorption equilibrium data of the adsorption process fitted very well to both Langmuir and Freundlich model. The maximum adsorption capacity ($q_m$) by Langmuir constant was 416.7 mg/g for MB and 462.4 mg/g for CV. The thermodynamic parameters such as ${\Delta}H^{\circ}$, ${\Delta}S^{\circ}$ and ${\Delta}G^{\circ}$ were evaluated. The MB and CV adsorption process was found to be endothermic for the two dyes.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1680-1683
• /
• 2003

To describe the performance of an antenna, some parameters are necessary. Some of the parameters are interrelate and not all of them must be specified for complete description of antenna performance. The parameters in characteristics of printed antenna for this analysis are radiation pattern, input impedance, VSWR, S parameter and electromagnetic field. In this paper we will consider two shaped of slot antennas one is triangular slot antenna and other is L - shape slot antenna for compare the radiation pattern, return loss, and VSWR. Two slot antennas are designed to have a resonant frequency at 10 GHz. The microstrip line is designed to be 50 ohms in order to match the measurement system, it has the substrate of the thickness = 1.52 mm and dielectric constant (${\varepsilon}_r$) 2.17. The problem space in the FDTD analysis are $60{\times}123{\times}100$ cells for L-shape slot antenna and $50{\times}171{\times}120$ cells for triangular slot antenna with the cell dimensions ${\Delta}x=0.152\;mm.$, ${\Delta}y={\Delta}z=0.15\;mm.$

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.224-225
• /
• 2002

펨토초 모드록 레이저는 공진기의 왕복시간 $\tau$마다 펨토초 폭을 갖는 펄스를 발생시키고, Fourier 변환에 의해 주파수 공간에서는 일정한 주파수 간격 $\Delta$ = 1/$\tau$을 가지는 불연속 스펙트럼, 즉 광빗 스펙트럼을 갖게 된다(1). 광빗의 간격, 즉 펄스의 반복률, 은 $\Delta$ ： v$_{g}$l$_{c}$의 관계식에 의해 그룹속도(v$_{g}$)와 공진기 길이(l$_{c}$)에 의해 결정된다. 광빗의 간격을 고정시키기 위한 가장 일반적인 방법은 공진기 길이를 일정하게 유지하는 것이다. (중략)

• Transactions on Electrical and Electronic Materials
• /
• v.10 no.4
• /
• pp.125-130
• /
• 2009

The clamping voltage characteristics and accelerated aging behavior of CoCrTb-doped Zn/Pr-based varistors were investigated for different sintering temperatures. The best clamping voltage characteristics were obtained for the varistors sintered at $1330^{\circ}C$, with a clamping voltage ratio (K) of 1.63 at a surge current of 5 A and 1.75 at a surge current of 10 A. The varistors sintered at $1330^{\circ}C$ exhibited the highest stability, with -0.1% in $%{\Delta}E_{1\;mA}$, -0.2% in $%{\Delta}{\alpha}$, and +15.5% in $%{\Delta}J_L$ for E-J characteristics under a stress state of 0.90 $E_{1\;mA/120^{\circ}C$ /24 h. Furthermore, it exhibited $%{\Delta}{\varepsilon}_{APP}$' of -0.7% and $%{\Delta}tan{\delta}$ of +5.7% for dielectric characteristics under the same stress state.

• Journal of The Korean Astronomical Society
• /
• v.15 no.2
• /
• pp.49-58
• /
• 1982

The UBVRIHKL magnitudes on Johnson system and space motions of M dwarf stars have been collected. This sample of M stars have been distinguished on a purely kinematical basis; the one with e<0.15, young disk population, with 0.150.3 halo population. On the color-color diagrams and the color excess-orbital eccentricity diagrams, there is no distinction between the old disk stars and the young disk stars. However (I-H) color could be used to distinguish halo stars from young and old disk stars and the color excesses, ${\Delta}(U-B),\;{\Delta}(B-V),\;{\Delta}(V-R),\;{\Delta}(H-K),\;{\Delta}(K-L),\;and\;{\Delta}(B-R)$ can be used as abundance indicators only for the halo stars. But these color excesses which are measures of blue excesses, are positive for the halo stars with smaller eccentricities and become negative for those with larger eccentricities.

• Korean Journal of Plant Resources
• /
• v.19 no.2
• /
• pp.243-247
• /
• 2006

To develop the natural brown hair-dye, we investigated the dyeability of hairs dyed with the extracts of Boehmeria tricuspis and chemical hair-dye and the changes in its colors as affected by the number of washing frequencies. When dyed with the extracts of Boehmeria tricuspis, ${\Delta}E$ values was increased over 11 compared with control and dyed an order of descent YR. ${\Delta}E$ values treated the ashing juice of Japanese cleyera with a mordant was mostly increased about 15.52. Hairs was dyed with the extracts of Boehmeria tricuspis and we investigated L, a, b and ${\Delta}E$ values as affected by the number of washing frequencies. When treated the ashing juice of Japanese cleyera with a mordant, L values was mostly decreased, however, a, b and ${\Delta}E$ values was increased significantly. L values of hairs dyed with the extracts of Boehmeria tricuspis and washed over thirty times became low compared with that dyed with chemical hair-dye and changes in a, b and ${\Delta}E$values of that was small.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.11
• /
• pp.2835-2844
• /
• 1998

Most data parallel languages provide the block-cyclic distribution (cyclic(k)) that is one of the most general regular distributions. In order to generate local addresses for an array section A(l:h:s) with block-cyclic distribution, efficient compiling methods or run-time methods are required. In this paper, two local address generation methods for the block-cyclic distribution are presented. One is a simple scan method that is modified from the virtual-block scheme. The other is a linear-time ${\Delta}M$ table that contains the local memory access information construction method. This method is simpler than other algorithms for generating a ${\Delta}M$ table. Experimental results show that a simple that a simple scan method has poor performance but a linear-time ${\Delta}M$ table generation method is faster than other algorithms in ${\Delta}M$ table generation time and access time for 10,000 array elements.

• Restorative Dentistry and Endodontics
• /
• v.40 no.4
• /
• pp.255-261
• /
• 2015

Objectives: The aim of this study was to evaluate the effect of three different drinks on the color parameters of four different restorative materials. Materials and Methods: Three different composites (Filtek Ultimate Universal Restorative, Filtek Ultimate Flowable, and Filtek Silorane, 3M ESPE) and a polyacid-modified composite resin material (Dyract XP, Dentsply DeTrey GmbH) were evaluated. Eighty-four disc-shaped specimens of 8 mm in diameter and 2 mm in thickness were prepared (n = 21 each). Color coordinates ($L^*a^*b^*$, ${\Delta}L^*$, ${\Delta}a^*$, ${\Delta}b^*$, and ${\Delta}E^*$) were measured using a $V{\dot{I}}TA$ Easyshade Compact ($V{\dot{I}}TA$ Zahnfabrik) after 24 hr of storage (baseline) and after 30 day of storage in three different beverages of black tea, Coca cola, or water (control) (n = 7). In each beverage, the specimens were stored three times a day, one hr each, for 30 day. The color changes (${\Delta}E$) were calculated and were analyzed by Kruskal-Wallis and Dunn multiple comparison test. Results: The color difference (${\Delta}E^*$) of the resin materials ranged between 1.31 and 15.28 after 30 day of immersion in the staining solutions. Dyract XP in Coca cola ($15.28{\pm}2.61$) and black tea ($12.22{\pm}2.73$) showed the highest mean ${\Delta}E^*$ value after 30 day, followed by Filtek Ultimate Universal Restorative ($5.99{\pm}1.25$) and Filtek Ultimate Flowable ($4.71{\pm}1.40$) in black tea (p < 0.05). Conclusions: The compomers displayed unacceptable color changes at the end of 30 day in all beverages. Among resin composites, the silorane based composite exhibited relatively good color stability than the others. Filtek Ultimate Universal Restorative and Filtek Flowable showed similar color changes in all beverages.