권호 표지

산업경영시스템학회지 (Journal of Korean Society of Industrial and Systems Engineering) (Journal of Korean Society of Industrial and Systems Engineering)

한국산업경영시스템학회 (Society of Korea Industrial and System Engineering)

  • 계간
  • /
  • 2005-0461(pISSN)
  • /
  • 2287-7975(eISSN)

과학기술표준분류

  • 경제/경영 ＞ 경영전략/윤리

Aim & Scope

As the flagship journal of the Society of Korea Industrial and Systems Engineering, Journal of Society of Korea Industrial and Systems Engineering launched in 1978 publishes original high-quality papers on a wide range of topics of interest to industrial engineers who want to remain current with the state-of-the-art technologies. It aims to foster the engineering and business administration community by publishing papers with a strong methodological focus motivated by real problems that impact engineering practice and research. It is composed of various focus issues: design and manufacturing, operations engineering and analysis, quality and reliability engineering, intelligent information systems, scheduling and logistics and business administration. The journal published quarterly in March, June, September and December each year. The official title of the journal is 'Journal of Society of Korea Industrial and Systems Engineering' and the abbreviated title is 'J. Soc. Korea Ind. Syst. Eng.'. All submitted manuscripts are peer-reviewed by three reviewers. The text may be written in Korean or English. The abstract, acknowledgement, and references should be written in English. Some, or all, of the articles in this journal are indexed in Korea Citation Index (KCI). Manuscripts should be sent to the editorial office by the website, 'http://ksie.ne.kr' that is the URL address of the journal where full text is available. This journal was supported by the Korean Federation of Science and Technology Societies(KOFST) Grant funded by the Korean Government.

http://ksie.or.kr/run/thesis/thesis.php?bid=thesis KSCI KCI

제23권55호

  1. 조용욱;박명규 1
    PDF
    Taguchi's robust design methodology has focus only a single characteristic or response, but the quality of most products is seldom defined by a characteristics, and is rather the composite of a family of characteristics which are often interrelated and nearly always measured in a variety of units. The multiple characteristics problem is how to compromise the conflicts among the selected levels of the design parameters for each individual characteristic. In this paper, Methodology using SN ratio optimized by univariate technique is proposed and a parameter design procedure to achieve the optimal compromise among several different response variables is developed. Also, We propose a decision model to incorporates the values assigned by a group of experts on different factors in weighting decision. Using this model, SN ratio of taguchi method for each of subjective factors as well as values of weights are used in this comprehensive method for weighting decision.
  2. 이승훈;이정환 13
    PDF
    6 sigma movement is the most prominent quality improvement methodology in practice. Measurement plays an important role in helping any organization improve quality. Therefore, the measurement systems analysis is the first step for the quality improvement of manufacturing process in 6 sigma movement. In this study, we investigate the effect of Gage Repeatability and Reproducibility(Gage R&R) in view of defect rate and process capability indices, and provide guidelines for acceptance of gage repeatability and reproducibility(%R&R) for six sigma quality.
  3. Yang, Hee-Joong 25
    PDF
    To make a better decision about when to shutdown a nuclear power plant, we build a decision model using influence diagrams. We proceed the analysis adopting a bayesian approach. Firstly, an accident arrival rate is assumed to be known and this assumption is relaxed later. We perform our analysis on the cases of exponential time to accidents, and gamma distribution for the arrival rate. An optimal shutdown time is obtained considering the trade-off between the costs incurred by an accident due to late shutdown and the possible loss of revenues due to the early shutdown. We also derive the upper bound of the failure rate where we may operate the plant.
  4. 이동춘;부진후 33
    PDF
    It is difficult to estimate the effective factors upon Cumulative Trauma Disorders in real workplace because those are developed by combination of various risk factors for time. The purpose of this paper was to evaluate relative level of CTDs risk factors such as task-related factors, anthropometric factors, joint deviation factors and personal factors using fuzzy linear regression models. And the models are built corresponding to each category with the survey data from telephone operators. The coefficient of fuzzy models are described as the relative level of variable to present risk factors upon CTDs.
  5. 권병우;이동형;김진수;임준묵 43
    PDF
    Recently, the companies can't avoid the change toward the jobbing production from mass production because manufacturing types are changed from manufacturing-oriented to customer-oriented for the security of competitive power among the related companies. The jobbing production system usually has such problems as low productivity, high unit cost, much stocks, long manufacturing time and one-sided decision of delivery date compared with the mass production. In order to settle these problems in the jobbing production system, we introduced the JIT production system including 3 regulations & 6S activities and Kanban system etc. The effective operation of JIT production system makes the processes efficiently and reduces the unneeded stocks and maximizes the revenue of company.
  6. 박무현;도상호;배주한 51
    PDF
    A case of company manufacturing industrial valves is studied. To survive the fierce competition in the low-volume, high-complexity production environment, the company needs accurate information on the cost of its products. Current cost accounting system which allocates production costs based on the weights of intermediates and final products cannot provide accurate cost information that managers really need. Data on the company's cost structure and production processes were reviewed and managers were interviewed before problems with the current costing system were identified. Activity-based costing (ABC) system as well as an improved traditional costing system is considered to replace the current system. A prototype of ABC system is developed to better represent the relationships among the cost drivers, activities, and products.
  7. 고현우;이인환 73
    PDF
    Up to the present, ISO 9000 series have contributed which construction of quality management system and improvement of quality competition. Therefore many enterprises have taken an increasing interest in ISO 9000 series and the number certification of it is on the increase every year. In these processes, the side effect has come out. It is of no use to competitive power of enterprise. Because they made an effort for certification without preparation for a short period or there was no continuous system control. In this paper, We review the weakness of existing ISO 9000 series, which have soon ahead of revision. In addition, We propose the considering items or contents in revision for enterprise competition power.
  8. 박동진;황인극 85
    PDF
    This paper describes IDMS, a graph-based modeling system that supports problem structuring. We employs influence diagram as a problem representation tool, that is, a modeling tool. In particular, IDMS is designed as domain-independent shell. Therefore, a modeler can change the contents of the knowledge base to suit his/her own interested domain. Since the knowledge base of IDMS contains both modeling knowledge and domain knowledge, IDMS provides not only the syntactic support for modeling tool, but also the semantic support for problem domain. To apply the method in the real world context, we tested IDMS on the process selection problem in business reengineering, which is typical semi-structured problem.
  9. 이철우;서윤정 97
    PDF
    In this paper, we would be searching for the complemental aspects in industrial relations of Korea compared with that of Japan. It is very reasonable that historical, geographical, and especially gene analysis data are almost identical, considering that the general evaluations to the motive of Japan's industry are $\ulcorner$the modernization of the tradition$\lrcorner$. Although it is reported Korea accomplished the high economic growth rate, the economic growth rate(efficiency) could not be continued. This reason looks like that Korean proper(eigen) traits(:Gene-ware) have been oppressed and concealed by social climate such as jealousy, stratagem and hatred, we can find one of this facts in the criminal and complaint numbers as social trust measurement. There are many cases that Korean industry was distorted by the superiority/inferiority relations, for examples, the loss of the native(eigen or proper) resources, a distorted introduction of the production method and the unfolding of the industry which be not related to the characteristics of region. In this reasons, Korean industry could not play the role of Human-ware function which activates Gene-ware or, Gene-Nascence. In this Human-ware aspects, Japanese characteristics, such as $\ulcorner$Getting the basic right$\lrcorner$ and $\ulcorner$Tendency to the origin$\lrcorner$, are to be useful in the Nascence of Gene-ware in Korean industry.
  10. 박우용;허정준;김광섭 107
    PDF
    Electronic Commerce is purchasing or sales a products and services to customers using computer network. It is different to traditional commerce. Also, It divide into business to business commerce and business to customer commerce. Cyber Shopping Mall is a representative type of business to customer commerce. The interest and demand of national business to customer commerce is explosively increasing with industry. It expect to reach 61 billion won in the 2000. Thus Structure of Cyber Shopping Mall is the more complex and the more vary types. It is the problem that change of established Cyber Shopping Mall structure is very difficult. The purpose of this study Is designed to Cyber Shopping Mall Purchase Process that deal with quickly changable internet environment and meet the needs of customers immediately using UML(Unified Modeling Language) in design phase determinant of Cyber Shopping Mal1 structure. Cyber Shopping Mall Purchase Process is designed to have objective-oriented development methodology's advantage. It has a flexibility in case of shopping mall structure change and acts as useful guideline in design phase of construction of Cyber Shopping Mall.