권호 표지

산업경영시스템학회지 (Journal of Korean Society of Industrial and Systems Engineering) (Journal of Korean Society of Industrial and Systems Engineering)

한국산업경영시스템학회 (Society of Korea Industrial and System Engineering)

  • 계간
  • /
  • 2005-0461(pISSN)
  • /
  • 2287-7975(eISSN)

과학기술표준분류

  • 경제/경영 ＞ 경영전략/윤리

Aim & Scope

As the flagship journal of the Society of Korea Industrial and Systems Engineering, Journal of Society of Korea Industrial and Systems Engineering launched in 1978 publishes original high-quality papers on a wide range of topics of interest to industrial engineers who want to remain current with the state-of-the-art technologies. It aims to foster the engineering and business administration community by publishing papers with a strong methodological focus motivated by real problems that impact engineering practice and research. It is composed of various focus issues: design and manufacturing, operations engineering and analysis, quality and reliability engineering, intelligent information systems, scheduling and logistics and business administration. The journal published quarterly in March, June, September and December each year. The official title of the journal is 'Journal of Society of Korea Industrial and Systems Engineering' and the abbreviated title is 'J. Soc. Korea Ind. Syst. Eng.'. All submitted manuscripts are peer-reviewed by three reviewers. The text may be written in Korean or English. The abstract, acknowledgement, and references should be written in English. Some, or all, of the articles in this journal are indexed in Korea Citation Index (KCI). Manuscripts should be sent to the editorial office by the website, 'http://ksie.ne.kr' that is the URL address of the journal where full text is available. This journal was supported by the Korean Federation of Science and Technology Societies(KOFST) Grant funded by the Korean Government.

http://ksie.or.kr/run/thesis/thesis.php?bid=thesis KSCI KCI

제24권69호

  1. 오근태;차상원 1
    PDF
    In this paper, the consumable concurred spare parts requirement determination problem of newly procured equipment systems is considered. The problem is formulated as the operational availability maximization problem with any given fund limitation. the that the failure of a part follows a Poisson process and part failure rate is constant in spite of the decrease of number of equipments during operational period, an analytical method is developed to obtain spare part requirements using the generalized Lagrange multipliers method, The numerical examples show that analytic solution is mostly equal to the realistic solution obtained from simulation regardless of assumptions about part failure rate. It is expected that the analytical method developed in the paper can be effectively used to make a budget for provisioning the concurrent spare parts of newly procured equipment system.
  2. 강민식;김재련 13
    PDF
    The efficient quality assurance system to prevent mixed assembly in introduced in this paper, It supports JIT(Just-In-Time) based Kanban and demand pull system. A new system is designed for the synchronized production and quality assurance using barcode and production kanban card, And the performance improvement method for the stable and fast response of the proposed system is suggested in this paper also. As the result of the proposed system, we improved production status visibility and quality traceability.
  3. 김인호;구태용;현준식 23
    PDF
    This paper attempts to identify the relationship between the business model and its financial performance through the construct of business paradigm, fit which may be defined as the congruence between the customer needs (the demand side) and the firm competence( supply side) to meet them, Each business model\`s business paradigm fit reflects how well the technology that business model has taken is interconnected with market. Basically, the business paradigm fit consists of two parts, product fit dealing with the product(s) to meet the customer needs well and process fit focusing on producing and/or providing that product(s) at the lowest costs. For empirical tasting the business paradigm fit matrix and the measures for them were developed and the data about 73 companies as sample were collects with questionnaires. The findings are: First business paradigm fit can be used as a strong empirical indicator for the firm performance, Second. balance fit in product or process gives to the most desirable outcomes and no fit brings about the worst ones. Third the over fit(the case of doing more excessive innovative efforts than to be needed) shows much better outcomes than the under fit(the case of doing less innovative efforts) Fourth, this paper shows where, in what situation, and what type of innovation has to be taken for firm success at firm level, whereas Schumpeter(1934) already indicated the importance of innovation for economic growth at the economy /industry level. However, further study should be done later with more refined measures and expanded sample data.
  4. 이세재 36
    PDF
    Group level discriminations are observed in employment relations and other transactions in the form of residential occupational and production segregation and differential treatments. Recent developments in the rational theories of discrimination both on the market level and the non-market level are reviewed in terms of their relative strengths, weaknesses and complementarities. Taste discrimination could remain much suppressed in the market but could effect much chain reaction through various ways of statistical discrimination, price discrimination, human capital investment and segregation. Taste discrimination could also take the more structured form of co-workers' requiring compensation for reduced productivity due to increasing interactions with members of different language and culture in a non-segregative system. If could also be viewed in the framework of brand learning models. Non-market models of discrimination are seen to be an essential part to explain extended modes of discrimination.
  5. 이준엽;김철홍 51
    PDF
    A laboratory experiment was conducted to investigate the effects of working posture. work/rest ration, and task type on the physical workload in automobile assembly jobs. Ten healthy male university students participated as subjects in the experiment. East subject performed 18 experimental session with combination of 3 working posture 3 work/rest ratio and 2 task types. To examine the effect of various working conditions on workload, DMG analysis was performed on 4 different muscles in the neck an arm area, Also RPE scale and heart rate were taken as response variables. The result showed that all working conditions considered in the experiment had significant effects on the workload concluding that labor intensity in auto assembly jobs should be adjusted with respect to different levels of working posture, work/rest ratio, and task type. Detailed analysis are presented in the paper.
  6. 황성환;이형일;이동충 65
    PDF
    The objective of this study is to evaluate the vibration attenuation effects of the different type of gloves and drilling mode while operating a light-weighted powered hand drill. For the experimental design, five different kinds of glove(barehanded cotton partly coated anti-vibration, and open-finger vibration glove) two types of push force level(100N and 200N) and two types of drilling mode(impact and non-impulsive) were considered. Six healthy male subjects were employed to drive screws into a vertically mounted marble plate with a powered hand drill in a randomly ordered experimental conditions. The findings of this study are summarized as follows; (1) It was found that the best combination of overall BMS transmissibility was using impact drilling mode with anti-vibration glove among evaluated experimental conditions (2) The wearing open finger vibration glove in mid-frequency level and anti-vibration glove with impact drill in high-frequency were the best in the result from mean corrected transmissibility equation of ISO 10819.
  7. 정승환 75
    PDF
    This empirical study examines the current status of TqM implementation in Korean service industry The data were collected from employes in hotels located in Seoul, korea with the questionnaire. The several statistical method such as t-test multiple regression were used for analysis. The major findings include the followings : First TQM practices have become common in Korean hotel industry. Second, There exist significant TQM factors which effect on customer satisfaction. For the high level hotel group supplier management, quality data management employee relations, and training are important factors for customer satisfaction while top management role and employee relations are significant factors for low level hotel group.
  8. 김유창 87
    PDF
    A significant number of all reported accidents in Korea involved education and training Based on the Labor Ministry data, statistics, show the education cause was directly involved in 38% of major accidents, Since safety managers have in charge of safety education at the factory, occupational safety curriculum must be studied to train safety manager effectively. In this study an analysis on relative importance of industrial safety curriculum for a good safety manager was performed by Analytic Hierarchy Process(AHP) The results showed that relative importance of industrial safety curriculum by AHP was safety management(w=0.240) ergonomics and system safety(w=0.201) construction safety(w=0.182) mechanic safety(w=0.139) electronic safety(w=0.134) and chemical safety(w=0.104) in order. The results could be used for industrial safety curriculum planning in university and safety organization such as Korea Occupational safety and Health Agency.
  9. 임창주;오세홍 93
    PDF
    This research includes the prototype development of the master plan title. "National Research and Development Program Integrated Management System". The system collects the information of projects, supports the survey analysis evaluation, and pre budget coordination of national research and development programs, and provide the information service for people about the situation of the national research and development. The results of the research may be used as the base technologies in information service(information retrieval directory service) to manage all programs of national research and development in their life cycle and to allocate resources efficiently to the national research and development in the increasing tendency. tendency.
  10. 우정열;황승국;강성수 107
    PDF
    In this paper, we propose a model of improvement of quality system level using system FMEA. The system FMEA is developed to a system analysis technique using the concepts of conventional FMEA. This is know what is important factor to manage the ISO 9000 Quality System. Therefore, it is used the system FMEA as the main method of the proposed model. The important factors of this model are internal quality audits, corrective and preventive action, customer claim review management review. This model is considered to be guideline for improvement of quality system level. We show the efficiency of the proposed model by means of a case study.
  11. 고현우;유정상 121
    PDF
    South and North Korea have many questions pending .Inter-Korea trade is the best actual problem among question pending. The biggest problem of inter-Korea trade in logistics cost. The logistics cost of inter-Korea is the highest position in the middle of foreign trade. We present that the cost reduction is possible by inter-Korea logistics standardization. This paper also shows logistics standardization strategy of South and North Korea.
  12. 박병태;서지한 133
    PDF
    가공조건은 가공비용과 시간을 줄이고 제품의 품질을 결정하는데 영향을 주는 주요 요인중의 하나이다. 본 논문에서는 밀링 공정을 위한 작업설계(Operation Planning) 시스템에서, 가공조건을 지속적으로 향상시키기 위한 새로운 방법론을 제안한다. 제안된 방법론은 밀링 작업에 대하여 (1) 퍼지 아트맵 신경회로망 모델에 의해 가공조건을 실시한 학습하고 (2) 교체 알고리즘이라 불리는 새로운 알고리즘을 포함한다. 제안된 교체 알고리즘은 기존의 학습 정보보다 효율적인 새로운 가공조건이 얻어졌을 때 이를 이용하여 기존의 학습 정보보다 효율적인 새로운 가공조건이 얻어졌을 때, 이를 이용하여 기존의 학습 정보를 대체하는 기능을 수행한다. 본 논문에서는 우선 작업설계 시스템의 전반적인 기능을 간략히 소개한 후 제안된 방법론에 의한 의사결정 과정을 자세히 기술한다. 또한, 다양한 시뮬레이션을 통하여 제안된 방법론의 의한 의사결정 과정을 자세히 기술한다. 또한, 다양한 시뮬레이션을 통하여 제안된 방법론의 성능을 예시하도록 한다.