권호 표지

Journal of Korean Society of Industrial and Systems Engineering (산업경영시스템학회지)

Society of Korea Industrial and System Engineering

  • Quarterly
  • /
  • 2005-0461(pISSN)
  • /
  • 2287-7975(eISSN)

Domain

  • Economics/Management ＞ Business Strategy/Ethics

Aim & Scope

As the flagship journal of the Society of Korea Industrial and Systems Engineering, Journal of Society of Korea Industrial and Systems Engineering launched in 1978 publishes original high-quality papers on a wide range of topics of interest to industrial engineers who want to remain current with the state-of-the-art technologies. It aims to foster the engineering and business administration community by publishing papers with a strong methodological focus motivated by real problems that impact engineering practice and research. It is composed of various focus issues: design and manufacturing, operations engineering and analysis, quality and reliability engineering, intelligent information systems, scheduling and logistics and business administration. The journal published quarterly in March, June, September and December each year. The official title of the journal is 'Journal of Society of Korea Industrial and Systems Engineering' and the abbreviated title is 'J. Soc. Korea Ind. Syst. Eng.'. All submitted manuscripts are peer-reviewed by three reviewers. The text may be written in Korean or English. The abstract, acknowledgement, and references should be written in English. Some, or all, of the articles in this journal are indexed in Korea Citation Index (KCI). Manuscripts should be sent to the editorial office by the website, 'http://ksie.ne.kr' that is the URL address of the journal where full text is available. This journal was supported by the Korean Federation of Science and Technology Societies(KOFST) Grant funded by the Korean Government.

http://ksie.or.kr/run/thesis/thesis.php?bid=thesis KSCI KCI

Volume 18 Issue 33

  1. 이기태;김재련 1
    PDF
    The allocation of files is essential to the efficiency and effectiveness of a distributed system that must meet geographically dispersed data processing demands. In this paper, we address an optimization model that generates optimal file migration policies in distributed database systems. The proposed model is a more generalized model that includes system's capacity constraints - computing sites' storage capacity and communication networks' capacity - which have not taken into consideration in previous researches. Using this model, we can establish initial file allocation, file reallocation and file migration polices that minimize a system operating cost under system's capacity constraints at an initial system design or reorganization point The proposed model not only can be adopted by small-sized systems but also provides a foundation for effective and simple heuristics for adaptive file migration in large systems.
  2. 유인선;오근태 11
    PDF
    This study sets a goal of establishing work standard and standard time in a machine tool process consisted of high-priced NC machine tools. Firstly, the theories of work standard and standard time in the field of NC machine tools are studies. Secondly, the theories are actually applied to a manufacturing company; work standard sheets are developed and applied to a machining center haying low operation rate, and then the increase in productivity is compared. Finally, problems to be studied later in relation to work standard and standard time are presented.
  3. 박하수;김민규 29
    PDF
    An Automated Storage/Retrieval Systems(AS/RS) has been gradually emphasized because of the change of production and distribution environment. This paper develops algorithm and Shortest Distance Model that can reduce the traveling time of a stacker crane for efficient operation of AS/RS. In order to reduce the traveling time of a stacker crane, we determine the order processing and then the sequencing of storage/retrieval for each item. Order processing is determined based on the SPT(Shortest Processing Time) concept considering a criterion of retrieval coordinate. The sequencing of storage/retrieval is determined based on the Shortest Distance Model by using a modified SPP(Shortest Path Problem) of network problem. A numerical example is provided to illustrate the developed algorithm and Shortest Distance Model.
  4. 김형준 39
    PDF
    The purpose of this article was to understand the individual proportion of quality costs which have been expended by manufacturing industries in Seoul and Kyunggido district. The collected data on 72 firms could be use for an empirical analysis and the ratio test was implementented with the questionnaires. The finding were as following : by conparison with the proportion of quality cost in typical manufacturing industrial of U.S., We concluded that total quality cost was occupied with a small portion of sale. Also as compared with the individual item of quality cost, it was noted that the proportion of prevention cost had increased in a relatively large company.
  5. 정상윤;하승철;황문영 45
    PDF
    The Purpose of this paper is to describe and demonstrate a quantitative procedure for evaluating alternative material handling systems that are being considered for possible purchase. The procedure considers both quantitative factors(i.e. costs) and qualitative factors(i.e. equipment productivity) that should be considered in the evaluation process. Since these factors are not always quantifiable it is necessary that the procedure be able to quantify all factors in commensurable units. This is accomplished via a modification of the Brown and Gibson model for facility site location and selection. The model was demonstrated via a case example that encompassed the derivation of performance measures for three material handling systems.
  6. 이원희 55
    PDF
    The corporate culture contributes much to the approach to the management problems as well as to the view to see the problems in the light of the multiplying-enterprise environment. In comparision with the large size corporates, the small-medium size corporates under various disadvantage conditions increase to the high achievement through the development of corporate culture, though the period and method to root in the corporate culture differ from one another depending on the situations. The purpose of this paper is to propose the owner's intention and efforts, the development of the corporate culture helpful for the long-run achievement, the cultural network and the member's role which prove to be effective method to root in the corporate culture.
  7. 박재영;신영석;문기주 63
    PDF
    Most of small-to-medium sized companies use computer to manage and control their manufacturing system. However, it is real hard to find a company which uses the system properly. There are several reasons. First of all, appropriate software to satisfy user's needs is not available and there is lack of mind to computerize. Therefore, this paper focuses to show difficulties which they will encounter, develop a model of computerized production management system and define proper level of computerization. An experimental system has been developed for an auto-parts manufacturing company using IBM-PC in the environment of MS-DOS and CA-Clipper.
  8. 김지승 71
    PDF
    In management contexts, mathematical programming is usually used to evaluate a collection of possible alternative courses of action on route to selecting one which is best. Using an application of linear programming known as Data Envelopment Analysis(DEA), a method is described to compare products which vary in excellence along a number of dimensions, and for each of which there might be a number of associated "costs". This paper is illustrated by comparing published benchmarks of notebook computers. Potential uses of a DEA analysis of products might be to assist corporate buyers who may need to reconcile a diversity of present and future uses in one standardised purchase; in competitor analysis; and as a normative model of product excellence against which product purchasing behavior could be compared. compared.
  9. 남궁석;이상용 79
    PDF
    This paper intends to develope the multi-objective loading model in a flexible manufacturing system (FMS) to support decision maker under fuzzy environment. To obtain the optimal solution, this paper uses interactive fuzzy multi-objective linear programing(IFMOLP) and describes the process of optimal solution. As a case study, numerical examples are demonstrated to show the effectiveness of the proposed model.
  10. Jae Joong, Kim;Won Joong, Kim 87
    PDF
    This paper proposes age replacement policy in stepdown warranty policy. The replacement policy is considered in case of minimally repairable items. And renewal theory is used in analyzing warranty costs. The expected cost per unit time is presented in stepdown warranty policy, free replacement, prorata and hybrid policy. In this article it is assumed that item is replaced at the age of T but the any failure is minimally repaired before the age T. At this point the expected cost per unit time is shown in customer's view point. And numerical example is explored in weibull time-to-failure distribution.
  11. 이선규;조범석 93
    PDF
    In this study we are concerned with the diagnostics method of cross-classified categorical data using logistic regression model of binary response models for cell proportions. under this model, we could examine the goodness-of-fit of the models using Pearson's $x^2$test statistic and likelihood ratio statistic. Under this model, these statistics are assumed that sample survey schemes are with replacement sampling model. But these statistics are often inappropriate for analysing contingency tables consists of complex sampling schemes obtained sample survey data. In this study we are examined diagnostics procedures detecting any outlying cell proportions and influential observations on design space in logistic regression modeltake account of the survey design effects.
  12. Honghee Lee 103
    PDF
    컴퓨터원용 공정계획(CAPP; Computer-Aided Process Planning)은 CAD와 CAM을 연결하는, CIM의 완성을 위한 필수 기능이다. 지금까지 많은 CAPP 관련 연구 논문과 시스템이 발표되었으나, CAPP의 필수 기능인 기계의 선택 문제를 근본적으로 다루고 해결한 예는 없었다. 본 연구에서는 먼저 완전히 일반적인 기계 선택 문제의 모델을 제시하였다. 그 모델로부터 기계 선택 문제의 속성이 고찰되었다. 기계 선택 문제는 완전히 일반화해서는 경우의 수가 다룰 수 없을 만큼 크기 때문에 그것을 단순화하는 방법들이 제시되었다. 예를 통해서 그 방법의 효과를 입증하였다.
  13. 김진규;윤덕균 111
    PDF
    This paper suggests a hybrid genetic algorithm for asymmetric traveling salesman problem(TSP). The TSP was proved to be NP-complete, so it is difficult to find optimal solution in reasonable time. Therefore it is important to develope an algorithm satisfying robustness. The algorithm applies dynamic programming to find initial solution. The genetic operator is uniform order crossover and scramble sublist mutation. And experiment of parameterization has been performed.
  14. Jong-Man Park;Soo-Il Jeong 119
    PDF
    Application of the PWFRM and SRGM for software reliability Prediction offers not only the judging base of model but also themselves with good applicabilty as easy-to-use tool.
  15. 김제숭 123
    PDF
    After the introduction of ATM as a proper technology for B-ISDN, there have been many research efforts to realize ATM networks. But a computationally tractable modelling technique which reflects diverse characteristics of the ATM traffic accurately is not available yet. In this study, we try to establish an accurate but still convenient ATM traffic model. We first introduce the modelling technique for the voice traffic based on the fluid flow approximation. Then we present a traffic model for the mixed traffic from multiple video sources and voice sources. The video source model is based on the 3 state continuous time Markov chain. The accuracy of the model is demonstrated by some comparison results with respect to simulation.
  16. Min-Yong Park 135
    PDF
    Hearing protection devices (HPDs) are currently the most common countermeasure against occupational noise-induced hearing loss. Use of HPD is only effective when they are properly Worn. However, industrial workers often do not very them, posing a serious under protection. This paper analyzes several motivational strategies which might be applied improve HPD use in the field. It was concluded that such methods could readily be implemented in the workplace to protect workers exposed to hazardous industrial noises.
  17. 이희춘 143
    PDF
    In this design the sampling interval that each sampling time changes according to the valuse of the previous to sample statistics, sample mean and ranges. The VSI scheme uses large sample if the sample statistics appear near in side the control limits and smaller sample otherwise. The efficiency of the VSI scheme is compare to the FSI. It is shown that VSI control chart improves the confidence of the procedure and performens better than FSI control chart.
  18. 권희철 153
    PDF
    This paper presents the parallel-type inventory structure using an order-up-to level inventory control system for analyzing the approximation of the expected units backordered and the measure of service. The rate of total expected backorders which is the measure of disservise, is given by dividing the improved units of total expected backorder into the total demand during an order cycle. the average annual total cost in system is obtained by considering the results. Total backorder model for the system without redistribution and the system with redistribution is described.
  19. 김동석 161
    PDF
    When physical distribution cost can be correctly measured, its management can also be efficient. Thus the primary objective of the study is to develop systems for measuring correctly physical distribution cost. The systems have two aspects : the One is the consumption of the resourses(materials, labor service, the other services), the other is the creation of physical distribution services(transportation, storage, cargo, packing, distribution conversion, management). By measuring the cost through the systems, the commoditization of the physical distribution services is possible and measurement of the cost and revenue can also be reasonable ,which makes its management efficient.
  20. 오화중 173
    PDF
    The Objective of the study was to determine the usefulness of human resource accounting(HRA) information in assisting financial analysis in their investment decisions. The objective achieved by an investigation through which the reporting of HRA, combined with demographic factors that are independent or interactive, affects the decisions of financial analysts regarding the estimation of the market price of a hypothetical company's common stocks. Two kinds of research were conducted to increase the reliability of the study at the same time. Two or three sets of financial statement were prepared. Each consists of balance sheet and income statement. The actual financial statement was modified to exclude personal bias and opinion.
  21. 채규옥;한기수 185
    PDF
    Labor union movements brought wage workers into being in the process of industrialization after the Industrial Revolution and they were started with efforts to solve a variety of special problems, brought up in the industrial society by systematic activities. Labor union shows us many differences in the direction of the movement according to its philosophical tendency. Objective of this study is as follows : To find out the problems of labor union movements for democratization of management to present the direction of labor movements based on the democracy of Industry. Accordingly chapter II examines on the Labor union literally for better understanding of the labor union movements Chapter III deals with the structure, characteristic and development process of our country's labor union chronologically. And on the basis of the development process chapter IV suggests the roles on the union, management and government for better union movements. Chapter V reaches a conclusion.