If zero-accident movement is to be successful, the objective goal period should be surely obtainable, and much more in our country where frequency rate of injury are remarkably fluc-tuating. However In our country, as far as we know, no method to establish a reasonable zero-accident goal period is guaranteed. In thls paper, a new establishing-method of reasonable goal period for individual industry with considering recent accident trend is presented. A mathematical model for industrial accidents generation was analyzed, and a stochastic process model for the accident generation inteual was formulated. This model could tell the accident generation rate in future by understanding the accident tendency through the time-series analysis and search for the distribution of numbers of accidents and accident interval. On the basis of this, the forecasting method of goal achievement probability by the size and the establishment method of reasonable goal period were developed.

A methodology for developing an object description system based on functional-structure of chemical plant is proposed. A knowledge base for chemical plant fault diagnosis is also organized in a generic fashion using the heuristic knowledge of human operators. A plant can be seen as a hierarchical set of subsystems. Each subsystem is called a SCOPE. The state of the plant and the behavior of each subsystem is managed by the SCOPES. A computer-based system based on thls methodology and knowledge base has been developed and applied to the subprocess of ethylene plant to evaluate the effectiveness of the methodology.

The exhausted gases were analyzed and the countermeasures were studied to solve the environmental pollution caused by waste gases in Chung-Ju Industral Complex. The eleven working places were selected to analysis the compositions and concentrations of the exhausted gases by gas chromatograph and membrane method. The five companies which have used organic solvents were shown lower content than TLV and the environmental limits. But the concentration of lead in a electric product company was revealed higher than TLV. The waste gases of the four companies which have used asbestos were shown lower values than TLV and the environmental limit. The exhausted gases, SO$_2$and NO$_2$of two companies which have used fossile fuels were also analyzed. The NO$_2$concentration of one company which haven't disposal system was shown higher than the environmental limit.

Analysis of Dynamic Characterisocs of Rectangular Plate by Finite Element Method. Dynamic characteristics of a rectangular plate with opening in it is studied by finite element method. To investigate these characteristics 12 degrees of freedom membrane finite element in used. The rectangular membrane finite elements are defined by specifying geometry, internal displacement functions and strain-displacement relations. Then, the governing equation for the finite element is derived by energy method. To derive the mass matrix and stiffness matrix of the element, expressions for strain and kineic energy in terms of the node displacement are generated. In constructing the overall structure matrix, the matrix of each elements are superposed and partitioned by applying the given boundary condition to obtain a nonslngular matrix. To find the natural freguencies and viration modes, the eigen values and the corresponding eigen vectors are computed by the computer using well known Jacobi power method. In order to verify the capability of the membrane finite element, a flat rectangular plate is analyzed first, and the result is compared with well known analytical results to show the good agreement. A rectangular plate with opening in It is analyzed with the same finite element. The results are presented in this paper. Unfortunately, the literature study could not provide with some results to compare, but the results reveal that the output of this research is phlslcally reasonable. And the results of this research are useful not only in practice but also for the future experimental research in comparison purpose.

The submersible motor pump could have much more merits than the general pump such as higher exhaustion head, narrower installahon place, lower noise due to operating in the water and so on. But, so far, hydraulic mechanism of the axial thrust at impeller was not analysed quantitatively and so it is very difficult to solve the occuring problems. Therefore, in this study, we aimed to minimize the axial thrust acting on thrust bearing of submersible motor pump through the analysis of hydraulic mechanism of thrust and design rivision of impeller. Test carried out on the pump with an impeller 92mm in diameter, 6 balacing holes 10mm in diameter, showed the thrust is reduced by about 86％ at the normal operating point.

The retardation effect of fatigue crack propagation after cyclic overloading seems to be affected by strain hardening exponent. Namely, for the material with high values of n, the delay effect is found to be severe. We proposed a modified crack retardation equation which may apply the retardation of fatigue crack growth after a cyclic overloading, as (da/dN)'$_{cyc}$=($\mu$n＋λ)B $\Delta$ $K^{q}$ /[(1－ $R_{eff}$) $K_{cf}$ －$\Delta$K]. where, $R_{eff}$ is effective stress ratio [＝( $K_{min}$－K, os)/( $K_{max}$－ $K_{res}$)] The constants $\mu$＝－0.5 and λ＝0.6, and the values are found to be identical for materials such as aluminum (A 1060), steel (SS 34), brass ( $B_{s}$ SIB) and stainless steel (SUS 304) used in this investigation. (SUS 304) used in this investigation.ation.n.n.

In this thesis, the electrification phenomenon was studied by measurement of charging current and discharging current in polymers when the carriers generated by corona discharge were supplied to the surface of polymers. Corona charging current of PVC, polar and noncrystalline polymer, was larger than that of nonpolar and amorphous polymers. Corona charging current on the specimen of naked upper surface (CIM) was larger than charging current on the specimen of electrode made. Carrier injection differed from interfacial phase of polymer surFace. The transfer phenomenon vaned with chemical structure of polymer and then the polar effect of PVC was remarkable because of large electron affinity of Cl. In the characteristics of discharging current of PVC, the abnormal current was observed. It was supposed that this phenomena presented the trap of injected carriers in PVC and that static electricity phenomenon was generated by trap.

흡수식 열펌프에서 폭 넓게 사용되고 있는 대표적인 냉매/흡수용액은 $H_2O$ / LiBr 계이다 그러나, LiBr 수용액의 점성계수는 LiBr의 농도가 커짐에 따라 증가하기 때문에, LiBr수용액의 농용액 영역에서 물질확산계수가 감소한다. 이 결점을 보완하기 위해 흡수용액에 계면활성제를 첨가시키므로서 흡수를 촉진시키는 방식을 이용하고 있다. 계면활성제의 첨가에 의한 흡수용액의 열 및 물질이동 촉진에 관한 연구는 계면활성제 첨가농도에 의해 흡수용액의 표면상에서 게면활성제가 액적으로 존재하는 계면활성제 포화용해도 이상의 조건에서 발생하는 마랑고니대류가 효과적이다. 이 흡수촉진효과는 냉매증기의 흡수시 흡수용액표면상의 분포한 계면활성제와 흡수용액사이의 표면장력차에 기인하는 계면교한 현상에 기인한다. 그러나, 이흡수촉지효과는 냉매증기의 흡수가 일어나는 흡수기 내부의 不안정상태, 즉, 불응축성가스(공기)가 존재하지 않는 조건하에서 이루어지며, 불응축성가스가 흡수촉진저하(열 및 물질이동의 저하)에 기인하는 연구는 보고된 바 없다. 이러한 불응축성가스가 흡수기 내부에 존재할 때 계면교한의 거동 및 열 및 물질이동저하현상을 파악하기 위하여 계면활성제 농도변화(포화용해도 이상 및 이하의 두 조건)에 따른 증기흡수 실험 및 계면교한가시화 실험을 행하였다. 결과적으로 본실험을 통하여 불응축성가스가 수증기흡수에 끼치는 영향을 파악(계면교란의 악화) 첨가시의 흡수량과 不安定상태(불응축성가스가 존재시)의 증기흡수량의 비교에 의해 급격한 증기흡수저하가 不安定상태하에서 발생함으로서 불응축성가스가 흡수촉진효과(계면교한현상)을 저해시키는 결론을 얻었다.es and facts obtained by the expenence in this area, respectively. Both depth-first search and backward chaining schemes are used in reasoning process. This expert system is written in an artificial intelligence language "PROLOG", and its availability is demonstrated through the case study.e함량은 감소되었으며 sulfhydryl기가 증가됨에 따라서 disulfide groups은 감소되는 경향을 보였고 ascorbic acid는 열처리 온도뿐만 아니라 시간과도 관련이 있음을 알 수 있었다. 저온 살균유와 초고온 살균유 사이에서는 지표물질들의 함량이 다소 차이가 있음을 볼 수 있었다.담시간이 구체적으로 기술되지 않았으며, 고유한 언어를 통역하는 과정에서 의미론적 문제에 대한 고려가 부족하였다. 면접과 기록과정에서 보면 자료의 기록과정과 분류 및 분석과정이 명시되어 있지 않았다. 참여관찰과 면접방법을 사용시 이에 대한 자세한 기술이 되어 있지 않았다. 5. 연구결과의 적용 및 이에 대한 논의는 상당히 제한되어 있었는데, 수편의 연구만이 방법론 문제점과 앞으로의 연구분야에 대한 전망을 제시하였으며, 특이한 것은 어 떤 연구자도 이른 개발을 위한 적용 및 임상실무적 차원에서 간호에 대한 제언을 하지 않았다.유모델변수들은 유입-유출 자료들로부터 평가할 수 있으며, 이를 위해서 본 논문에서는 Gauss-Newton 방법을 이용한 Bard

This paper presents a least-square algorithms of lattice structures and their use for adaptive prediction of time series generated from the dynamic system. As the view point of adaptive prediction, a new method of Identification of dynamic characteristics by means of estimating the parameters of linear auto regressive model is proposed. The fast convergence of adaptive lattice algorithms is seen to be due to the orthogonalization and decoupling properties of the lattice. The superiority of the least-square lattice is verified by computer simulation, then predictor coefficients are computed from the linear sequential time data. For the application to the dynamic characteristic analysis of unknown system, the transfer function of ideal system represented in frquency domain and the estimated one obtained by predicted coefficients are compared. Using the proposed method, the damping ratio and the natural frequency of a dynamic structure subjected to random excitations can be estimated. It is expected that this method will be widely applicable to other technical dynamic problem in which estimation of damping ratio and fundamental vibration modes are required.