This paper described design as a purposeful human activity for solving its problems. This means, problem solving is finding a way to get from some initial situation to a desired goal.In order to do this, like a voyage, there should be a compass, and a route map to guide the designer through the design process. Evaluation gives information about the way a design is proceeding and suggests the direction in which change should be made in order that the complex of design concepts should be fulfilled in a satisfactory manner.I think Pugh's total design model discussing in this paper takes a layered approach through a series of sequential actions, part of which is to find the product status. Each layer has the $$\mu$ti-dimensional elements, Product Design Specification (PDS) around the design core. I made a comparative study of several evaluation tools wi th Pugh's model and examined the criteria for evaluation and the rating / weighing methods.It needs, however, more study in order that PDSs may have its values and be fixed from the dynamic design concepts.

The purpose of this study was to provide basic information for establishment of a desirable design promotion policy drive by research and analysis of recognition to design by consumers (including students) and designers and their level, merchandise evaluation evaluation and obstructing factors in revitalization of designs. To implement such purpose as referred to hereinabove, research was made by introduction of questionaires which were distributed to 500 persons of consumers group and 350 individuals of registered designers in Seoul, and for analysis of the data, density and percentage (%) were obtained by use of SAS Package and the dispersed analysis and correlationship were added for necessary parts. The result of study is summarized as follows; (l)The consumers remind the design as costume (21%) and molding (20%), and the designers remind it as creativity (27%) & molding (14%) respectively and the reminding of design by the two groups was indicated very simi lar. (p < 0.001) (2)As per the recogni tion of roles by the designers the research has highly indicated as contribution to improving living standards or development of economy & industry, and also indicated that it creates excessive consumption with sti$$\mu$ative manner. (3)The design reacts as an important parameter in selecting cri teria of merchandises and deciding factors for purchasing and also, in enhancement of competitive power of merchandise impact of design (2.36) was regarded very high. (4)The Korean-made home appliances in image is assessed as vulnerable than that of Japanese products, and the product designing level is also shown difference from advanced countries (1.36), but has indicated as somewhat better than those competitive nations (0.51) (5)The satisfaction to design policy of the Gov't is very low (1.69) and they recommended for new establishment of Policy undertaking department within the Gov't and indicated reasearch & development of design as the major issue. In regard to the above I'd like to emphasize the design industry $$\mu$t be dealt with the national level as a whole in order to promote thereof.

The development of technology in modern industrial world which grows and changes every day is shortening the cycle of life span of products, so there is a flood of products around us. It is enough to say that this phenomenon leads to further emphasis on the aspect of design for human being. It is not a new fact that to design for the rational function and the modeling from to make a combination and to satisfy consumers' desire is a short cut to gain competitive superiority in developing new products for MIS security. Therefore the design which plays a leading role in the activity of creating more convenient, more aesthetic, and more econemical products is called 'NEW CORPORATE WEAPON'. The amount of effort made for developing products is different in each company, but recently the plan to develope new products and its process arouse more interest. This thesis purports to improve objective understanding about the development of design by investigating products development research and the process of analysis and designing as a case study on developing a domestic supersonic humidifier. This thesis consists of five chapters in all. In chapter one as a preface, the purpose the method and the scope of the study is described. Chapter two contains my effort to grasp the background of study on the design and the basic structure of supersonic humidifier. Chapter three is an examination into the present conditions of supersonic humidifier used in domestic and foreign area, and the shape of design. In chapter four, a guide for the development of design is established. The idea sketch based on a fundamental shape and the drawing are added to this. In chapter five on the basis of the result of analysis in the preceding research I describe the development of design of products on the premise that marketing gives proof for them but the products oriented by manufacturer are not included in this case. In this thesis, I try to recognize the process of the develpment of design and the importance of the plan for design in developing products by examining an investigative and analytic study on the design of products.

Nowadays conmpetltlOn of developing new products is getting keen. We can notice that the role and importance of design are emphasized more than ever.The main cause of this tendency is that technical power is no more a factor which secures the superiority in products competition, as technology is gneneralized in the world. Therefore, design is recognized intensely as a competitive strategy to promote competitive power of products. It is an already known fact that the design for both rational function and charming form to satisfy consumer's desires is a short cut to success, when a company develops a new product to promote competitive power in market. The design which plays a leading role in the activity of developing more cnovenient, more economical and more aesthetic products is called 'Competitive Edge' or 'New Corporate Weapon'. Judging form each company's case of developing products, we can guess that it has its own plan and process of developing new products with defferdnl interest and effort. The strategy of developing products is considered as the most important factor that affects the very existence of rhe company. This thesis is composed of six chapters in all. In the firstchapter, I describe the purpose, method, and scope of study.The second chapter includes the image of form in oil fan heater market in nearby Japan and that of interior in our domestic home and shops, and the trend of word life cycle by analyzing circumstances. The third chapter focuses on consumer's attitude. In the fourth chapter, I compare and test current products of competitive companies including Samsung, Daewoo, Shinilwith those of Gold STar. The trend of products, technique, and design which resulted form this comparison is described. In the fifth chapter I explain the strategy, and process of design of oil fan heater in 1992. The last conclusive chapter presents the major point drawed form the case study, but not includes an estimation of products and the condition of market. In this thesis, I reconsider the general understanding of design and designing process and the value of design as a main factor in the strategy of management by investigating the development of products and the strategy of design, and the process of design.

The development of Korean textile industry has continued for the early industrialization. But a change in situation of circumstances, textile industry undergoes hard times. To overcome the barrier, therefore, technical development and design innovation are needed to make high value added product. This paper try to put to practical use of the silk weighting process technique(WPT). First, we investigate the technical trend of WPT to summarize the theory, and examine the feasibility of technical development. Second, the application of Graft process to silk textile is examined to know whether it is possible as an practical use. Next, we present the practical way of WPT using MAA monomer through experiment. The results are as follow. 1) Considering the lack of silk yarn. Graft process is appropriate new technique to make the value added product, and fine quality. 2) Studing textile goods, it need inter-displlinary co-work not only fiber engineering scope because textile goods is closely related with fashion industry. 3) MAA monomer used in this paper is more excellent then other monomer because it has good weighting effect and does not harm to the nature of textile. 4) MAA WPT is good for silk textiles of ladies jacket and neck-tie.

대량생산을 야기 시킨 산업혁명은 공장주의 재산을 급속도로 부강하게 하는 한편 노동자의 생활 질을 급소도로 저하시켰다. 즉, 노동자들은 기계의 ‘손’역활을 하는 정도로 인격적으로 타락되었으며, 분업작업은 이들로부터 사고력마저 빼앗아 가게되는 실정에 이르렀다. 이익에 눈이 어두어 지게 된 공장주들은 노동임금을 최하로 저하시키고, 노동시설을 비롯해 자본투자를 최소한으로 줄이려는 데서 디자인 질의 격하현상을 초래했다. 즉, 창조적인 디자인 개발 대신에 다른 나라(특히 불란서)의 것을 모방하거나, 기존에 왔던 디자인들을 모방하는데 그치지 않았을 뿐 아니라, 롤러 프린트 사이즈에 맞게 기존된 디자인을 수정하는 작업이 디자이너가 아닌 직공에 의해 이루어지다 보니 그 난잡함은 이루 말 할 수 없을 정도였다. 푸긴과 러스틴은 각자의 작품에 대해 긍지를 지녔던 중세기의 장인제도로 돌아가자고 외쳤고, 러스킨의 아이디어를 철저히 계승받은 윌리암 모리스는 순수예술 못지않는 가치를 장식예술에 부여했으며, 건축이 모든 장식예술의 정점이라고 주장했다. 러스킨과 모리스의 정신을 이어받아 차세대의 건축가/디자이너들은 디자인의 질을 향상시키고, 디자이너의 위치를 화가나 조각가의 위치로 부각시키기 위한 끊임없는 노력을 통해,‘예술/공예 전시협회’를 창설해 오리지널한 장식예술품을 창조하도록 분위기를 조성했을 뿐만 아니라, 강여회와 저서들을 통해 디자이너 자신들과 산업체와 국민들을 교육시켰다. 맥머도, 보이지, 데이, 크레인, 하이테, 버터필드 등은 특히 벽지나 텍 스타일 디자인 등 패턴 디자인 분야에 관심을 보였다. 독창적이고 참신한 이들의 디자인들은 국내의 디자인 질을 향상시켰을 뿐만 아니고, 디자인사의 새 장을 열게끔 한 계기가 되었다.