Advanced Traveler Inoformation Systems*ATIS) , as a subsystem of ITS influence the travel choices of dreivers by providing them with historical, real-time and predictive information to supprot travel decisions and consequently improves the speed and quality of travel. For thesuccessul accomplishment of ATIS, the time-dependent variations of traffic in a road network and travel times of vehicles during their journey must be predicted . The purpose of this study is to evaluate the past developments in the dynamic route choice models and to apply the instantaneous dynamic user optimal route choice model. recently formulated with flow propagation constraints by Ran, Boyce and LeBlanc, to the real transportation network of Seocho-Ku in Seoul. As input data for this application, the time-dependent travel rates are estimated and the link travel time function is derived. The modelis validated from three view points : the efficiency of model itself the ability to predict traffic volume and travel time on links, and the optimal traffic control.

In recent year, especially in the mode choice analysis, it has been perceived that the importance of individual performance data using stated preference(SP) experiments as well as revealed preference data . Since SP experiments present respondent with various hypothetical alternatives, which are produced by a combination of a number of different attribute levels, and ask them to indicate a preference, it is possible to analyze travel behavior under a situation of potential environment change such as proposed alternative mode of transportation. The basic problems, however, remains that SP are not consistent with the actual travel behaviors and the research reports for stability of mode choice model using SP data has not been sufficient. Under this background, this study is to examine the characteristics of mode choice model using the SP data by the following items. $\circled1$ Analysis of factors affecting the mode choice behavior by the variance analysis of orthogonal-arrays-table $\circled2$ The reliability of SP data by transfer intention data $\circled3$ The stability of SP responses obtained from repetitive question by the comparison of model coefficient specified by each repetitive data. $\circled4$ The stability of ranking data in mode choice model For the analysis, we assumed subway operations in the Gwang-Ju , and set up a choice-set of hypothetical options based on Experimental Design Method.

The main purpose of this study is identifying the factors which affect the mode choice behavior of work trips. Disaggregate behavioral approach is used for the analysis . The data were collected using the questionnaire survey method in Taegu. Two models were developed in this study which are multinomial logit model(MODEL-1) for auto, taxi and bus and multinomial logit model (MODEL-2) for auto, taxi, bus and subway. The stated preference (SP) data were used for the analysis of the subway mode choice behavior. MODEL-1 provide reasonable results for the future application. A multinomial model (MODEL-2) developed using the stated preference(SP) data was tested for the use of future transportation mode. It is four that the those models provides reasonable results in terms of behavioral and statistical consideration.

The main objective of this research is the development of a logit model of urban workers' auto ownership choice. For the utility specification. a variety of behavioral hypotheses about the factors which affect the urban workers' auto ownership choice are considered. Based on the behavioral hypotheses, a binary logit model of auto ownership is estimated. Empirical estimation is based on a sample of workers taken in Daegu City(1994). The binary logit model of auto ownership development in this paper provides reasonable results in terms of behavioral and statistical considerations. Furthermore, this paper develops several submarket models of auto ownership choice. Market segmentation was made using age, sex, income, home-to-work time distance. It is found that the estimated results with market segmentation are also reasonable. Finally future directions of model development are suggested.

The elasticity of a model is considered most important. Without showing the proper elasticity any model cannot provide useful information for decision making. This paper demonstrates a macro model which can generate dynamic transport informations every 15 minutes. Without the Wardrop principles and the monotonicity assumptions for the link travel time and link volume relationship, the basic elements of this new modeling approache are composed of link density simulation, stochastic incremental route choice, departure time choice, destination choice and mode choice. The elasticity of the proposed model is examined based on elasticity equations and simulation results. Also the transferability from a mega city like Seoul to a big city like Daejon is demonstrated for the choice model. The issues centering around the dynamic relations among density(k), speed(u), and flow rate(v) are also discussed for the modeling of highly congested situations.

This paper deals with an operation concept of "time-transfer of buses", in which buses arrive a transfer center at the same time and allow passengers to transfer to other bus lines, so that passengerscan go anywhere all the timed-transfere buses operate with only one transfer. This timed-transfer bus system is known as an efficient operating technique which can be adopted in an area with sparsely distrubuted bus demand. A model of timed-transfer is estabilished in terms of vaious factors such as the expected(or average) arrival time, distribution of arrival time, timed-transfer cycle, shceduled departure time, etc. It is assumed that the objective of timed-transfer bus system is to minimize the total transfer waiting time. The optimal schedualed arrival time or buffer time(time required to arrive ealy in consideration of delay) is analyzed for a general case and various speicial cases. It was found that the optiaml buffer time is an inverse funcion of the timed-transfer cycl and increases with the cycle time, assumin g that there is a fixed scheduled departure time at the transfer cetner regardless of whether one or more buses fail to arrive before the scheduled departure time. If buses are to wait uhtil all the buses arrive at the transfer center, that is, the transfer departure time is vairable, the optimal scheduled arrival times can be obtained by a mathmatical programming.

Peak-period congestion is a frequent occurrence on many freeways. Entrance-metering is an effective strategey in improving urban freeway traffic condition. This paper describes the prodecure to develop a computer program for proparing optimum ramp-metering stategies. Four existing ramp-metering optimaization models wer reviewed and evaluated in regared to their theories and actural performances. A optimization model was proposed in this paper. Final model takes aform of quadratic programming. The performance of the propeosed model wastest using FREFLO.

The collective of highly reliable traffic data is necessary for traffic signal control. This study is to test application of RTMS sensor to traffic signal control. In order to find out the possibility of its application th traffic signal control, 5 types of experiments were performed. The major findings are as follows ; -The detection are a has been changing according to degree and gain. -At the results of experiments for interference are a measure, Degree 60 is stable condition. -At the results of reliability test for volume and speed. the error rate decreases as speed increases and that of Zone 1 is lower than that of Zone 3. -Two modes are set up for reliability test of traffic volume. It founds that the detection reliability of the stopped vehicles are higher than that of the passing vehicles at sidefire-intersection mode. It founds that the results are vice-versa at sidefire-highway mode. Conclusively, this sensor cannot directly apply to colection of traffic data for traffic signal control. However, this sensor can be substituted for a loop detector which is used popularly for signal control, and freeway traffic control if above faults are made up.