DOI QR코드

DOI QR Code

Characteristics in Densities and Shapes of Various Particles Produced by Friction between Tire Tread and Road Surface

  • Received : 2022.09.06
  • Accepted : 2022.09.23
  • Published : 2022.09.30

Abstract

A large amount of particles on the roads is produced by friction between the vehicles and the road surface and by inflow from outside. The type of these particles affects the abrasion behavior of tire tread. In this study, road dust collected at a bus stop was separated by size, and the particles with sizes of 106-212 mm were analyzed. The particles were separated by density using NaI and NaBr aqueous solutions with densities in the range of 1.10-1.80 g/cm3 with the 0.10 g/cm3 interval. In the road dust sample, the following particle types were found: tire-road wear particles (TRWPs), asphalt pavement wear particles (APWPs), plant-related particles (PRPs), road paint wear particles (RPWPs), and plastic particles (PPs). The densities of TRWPs, APWPs, PRPs, and RPWPs were 1.20-1.80, >1.60, >1.10, and >1.40 g/cm3, respectively, while PPs were found in all density ranges. Additionally, many small mineral particles were observed on the particles. Order of the relative content of the particles was PRP > TRWP > APWP ~ RPWP > PP. APWPs that were stuck to TRWP could be removed by chloroform treatment. The shapes of the particles were characterized using their magnified images.

Keywords

Acknowledgement

이 연구는 2020년도 산업통상자원부 및 산업기술평가관리원(KEIT) 연구비 지원에 의한 연구임(과제번호 20010851).

References

  1. C. Gunawardana, A. Goonetilleke, P. Egodawatta, L. Dawes, and S. Kokot, "Source characterization of road dust based on chemical and mineralogical composition", Chemosphere, 87, 163 (2012). https://doi.org/10.1016/j.chemosphere.2011.12.012
  2. U. Jung and S.-S. Choi, "Classification and characterization of tire-road wear particles in road dust by density", Polymers, 14, 1005 (2022). https://doi.org/10.3390/polym14051005
  3. U. Jung and S.-S. Choi, "A variety of particles including tire wear particles produced on the road", Elast. Compos., 56, 85 (2021). https://doi.org/10.7473/EC.2021.56.2.85
  4. C. E. Son and S.-S. Choi, "Preparation and characterization of model tire-road wear particles", Polymers, 14, 1512 (2022). https://doi.org/10.3390/polym14081512
  5. M. Kovochich, J. A. Parker, S. C. Oh, J. P. Lee, S. Wagner, T. Reemtsma, and K. M. Unice, "Characterization of individual tire and road wear particles in environmental road dust, tunnel dust, and sediment", Environ. Sci. Technol. Lett., 8, 1057 (2021). https://doi.org/10.1021/acs.estlett.1c00811
  6. P. Klockner, T. Reemtsma, P. Eisentraut, U. Braun, A. S. Ruhl, and S. Wagner, "Tire and road wear particles in road environment - Quantification and assessment of particle dynamics by Zn determination after density separation", Chemosphere, 222, 714 (2019). https://doi.org/10.1016/j.chemosphere.2019.01.176
  7. M. L. Kreider, J. M. Panko, B. L. McAtee, L. I. Sweet, and B. L. Finley, "Physical and chemical characterization of tirerelated particles: Comparison of particles generated using different methodologies", Sci. Total Environ., 408, 652 (2010). https://doi.org/10.1016/j.scitotenv.2009.10.016
  8. P. J. Kole, A. J. Lohr, F. G. A. J. V. Belleghem, and A. M. J. Ragas, "Wear and tear of tyres: A stealthy source of microplastics in the environment", Int. J. Environ. Res. Public Health, 14, 1265 (2017). https://doi.org/10.3390/ijerph14101265
  9. A. Wik and G. Dave, "Occurrence and effects of tire wear particles in the environment - A critical review and an initial risk assessment", Environ. Pollut., 157, 1 (2009). https://doi.org/10.1016/j.envpol.2008.09.028
  10. F. Amato, F. R. Cassee, H. D. V. D. Gon, R. Gehrig, M. Gustafsson, W. Hafner, R. M. Harrison, M. Jozwicka, F. J. Kelly, T. Moreno, A. S. H. Prevot, M. Schaap, J. Sunyer, and X. Querol, "Urban air quality: The challenge of traffic nonexhaust emissions", J. Hazard. Mater., 275, 31 (2014). https://doi.org/10.1016/j.jhazmat.2014.04.053