참고문헌
- Deidewig, F. and Wechsung, M., 2006, "Thermodynamic Aspects of Designing the New Siemens High Pressure Steam Turbine with Overload Valve for Supercritical Applications," ASME Paper. POWER2006-88020.
- Wechsung, M., Feldmuller, A. and Lemmen, H., 2012, "Steam Turbines for Flexible Load Operation in the Future Market of Power Generation," ASME Paper. GT2012-69312.
- Hwang, S. H., 2014, "중부발전 신보령 1,000 MW USC Plant 건설 현황 및 전망," Journal of Electrical World, pp. 45-51.
- Chaibakhsh, A. and Ghaffari, A., 2008, "Steam Turbine Model," Simulation Modelling Practice and Theory, Vol. 16, No. 9, pp. 1145-1162. https://doi.org/10.1016/j.simpat.2008.05.017
- Medina-Flores, J. M. and Picon-Nunez, M., 2010, "Modelling the Power Production of Single and Multiple Extraction Steam Turbines," Chemical Engineering Science, Vol. 65, No. 9, pp. 2811-2820. https://doi.org/10.1016/j.ces.2010.01.016
- Luo, X., Zhang, B., Chen, Y. and Mo, S., 2011, "Modeling and Optimization of a Utility System Containing Multiple Extractions Steam Turbines," Energy, Vol. 36, No. 5, pp. 3501-3512. https://doi.org/10.1016/j.energy.2011.03.056
- Bahadori, A. and Vuthaluru, H. B., 2010, "Estimation of Performance of Steam Turbines Using a Simple Predictive Tool," Applied Thermal Engineering, Vol. 30, No. 13, pp. 1832-1838. https://doi.org/10.1016/j.applthermaleng.2010.04.017
- Enter Software, GateCycle ver 6.0, 2006.
- Cooke, D. H., 1983, "Modeling of Off-Design Multistage Turbine Pressures by Stodola's Ellipse," In Energy Incorporated PEPSE User's Group Meeting, Richmond, VA, Nov., pp. 2-3.
- Spencer, R. C., Cotton, K. C. and Cannon, C. N. (1963). A method for predicting the performance of steam turbine-generators....: 16,500 kw and larger. Journal of Engineering for Power, Vol. 85, No. 4, pp. 249-298. https://doi.org/10.1115/1.3677341
- Cotton, K. C., 1998, Evaluating and improving steam turbine performance, Cotton Fact.
- Kang, S. Y., Lee, J. J., Kim, T. S., Park, S. J., Hong, G. W. and Ahn, J. H., 2016, "Program development for performance analysis of a steam turbine system with the use of overload valve," Journal of Mechanical Science and Technology (accepted).
- Jang, H. J., Kang, S. Y., Lee, J. J., Kim, T. S., & Park, S. J., 2015, "Performance analysis of a multistage ultra-supercritical steam turbine using computational fluid dynamics," Applied Thermal Engineering, 87, pp. 352-361. https://doi.org/10.1016/j.applthermaleng.2015.05.007
- Wechsung, M., Feldmuller, A., and Lemmen, H., 2012, Steam turbines for flexible load operation in the future market of power generation. ASME paper GT2012-69312.
- ANSYS Inc, ANSYS CFX 14.0, 2011.
- Abdelfattah, S. A. and Schobeiri, M. T., 2010, "Experimental and numerical investigations of aerodynamic behavior of a three-stage HP-turbine at different operating conditions," ASME paper. GT2010-23564.
- Murari, S., Sathish, S., Shraman, G. and Liu, J. S., 2011, "CFD aerodynamic performance validation of a twostage high pressure turbine," ASME Paper. GT2011-45569.
- Bohn, D., Ausmeier, S. and Ren, J., 2005, "Investigation of optimum clocking position in a two-stage axial turbine," Int. J. Rotating Mach. 3. pp. 202-210.
- Burton, Z., Hogg, S. and Ingram, G. L., 2014, "The influence of inlet asymmetry on steam turbine exhaust hood flows," J. Eng. Gas Turbines Power 136 042602.
- The International Association for the Properties of Water and Steam, Release on the IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam, 1997.
- The Mathworks, Inc, MATLAB 2016a (2016).
피인용 문헌
- 개선된 플렉시블 패킹 링을 통한 증기터빈 로터의 진동 저감에 관한 연구 vol.35, pp.7, 2018, https://doi.org/10.7736/kspe.2018.35.7.681