The Journal of the Korea Contents Association (한국콘텐츠학회논문지)

The Korea Contents Association (한국콘텐츠학회)
권호 표지
DOI QR코드

DOI QR Code

Effects of Treatment of Silane Coupling Agent in MPS Concentration on the Shear Bond Strength between Self Curing Resins and Heat Curing Resin

Silane coupling agent인 MPS 농도별처리에 따른 열중합 레진과 자가중합 레진 간의 전단결합강도

  • Received : 2014.11.24
  • Accepted : 2014.12.05
  • Published : 2015.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this study was to evaluate the effect of the surface treatment of widely used in dental of silane coupling agent concentration on the shear bond strength of denture base resin and self curing resins. Denture base resin surface was treated with silane coupling agent concentration, after self curing resins were injected shear bond strength was measured. The results of silane coupling agent(MPS) concentration on the shear bond strength of Vertex self curing resin showed that the value of 5%, 7% groups were higher than that of other group(P<0.05). Silane coupling agent concentration on the shear bond strength of Kooliner resin showed that the value of 5% was highest(P<0.05). Therefore, we could conclude 5% MPS to strengthen effectively the shear bonding property of denture base resin and self curing resins of this study.

본 논문은 치과에서 많이 사용되고 있는 silane coupling agent로 표면 처리한 의치상 레진과 자가중합 레진 간의 전단 결합력에 미치는 영향에 대해 알아보고자 하였다. 의치상 레진에 silane coupling agent 농도별 표면 처리 후 자가중합레진을 주입하여 전단결합강도를 측정하였다. Silane coupling agent(MPS)의 농도별 표면 처리에 따른 의치상 레진과 자가중합레진 간의 전단결합강도에서는 Vertex self curing resin에서 5%, 7%에서 유의적으로 높게 나타났고(P<0.05), Kooliner에서는 5%에서 유의적으로 가장 높게 나타났다(P<0.05). 따라서 의치상 레진과 자가중합레진 사이에 MPS 5%를 이용한 표면처리가 전단결합강도에 효과적으로 영향을 미치는 것이라 사료된다.

Keywords

References

  1. S. Sadamori, W. Siswomihardjo, K. Kameda, A. Saito, and T. Hamada, "Dimensional changes of relined denture bases with heat-cured, micro-wavectivated, autopolymerizing, and visible light-cured resins," Aust Dent J, Vol.40, pp.322-326, 1995. https://doi.org/10.1111/j.1834-7819.1995.tb04821.x
  2. A. Tallgren, "The continuing reduction of the residual alveolar ridges in complete denture wearers," J Prosthet Dent, Vol.89, pp.427-435, 2003. https://doi.org/10.1016/S0022-3913(03)00158-6
  3. W. M. Murphy, R. Huggett, R. W. Handley, and S. C. Brooks, "Rigid cold curing resins for direct use in the oral cavity," Br Dent J, Vol.160, pp.391-394, 1986. https://doi.org/10.1038/sj.bdj.4805870
  4. Arima T. Nikawa H, Hamada, and T, Harsini, "Composition and effect of denture base resin surface primers for reline acrylic resins," J Prosthet Dent, Vol.75, pp.457-462, 1996. https://doi.org/10.1016/S0022-3913(96)90044-X
  5. C. E. Vergani, R. S. Seo, A. C. Pavarina, and J. M. dos Santos Nunes Reis, "Flexural strength of autopolymerizing denture reline resins with microwavepostpolymerization treatment," J Prosthet Dent, Vol.93, pp.577-583, 2005. https://doi.org/10.1016/j.prosdent.2005.03.014
  6. T. Ohkubo, M. Oizumi, and T. Kobayashi, "Influence of methylmercaptan on the bonding strength of autopolymerizing reline resins to a heat-polymerized denture base resin," Dent Mater J, Vol.28, pp.426-432, 2009. https://doi.org/10.4012/dmj.28.426
  7. R. E. Ogle, S. E. Sorensen, and E. A. Lewis, "A new visible light cured resin system applied to removable prosthodontics," J Prosthet Dent, Vol.56, pp.497-506, 1986. https://doi.org/10.1016/0022-3913(86)90397-5
  8. C. A. Arena, D. B. Evans, and T. J. Hilton, "A comparison of bond strengths among chairside hard reline materials," J Prosthet Dent, Vol.70, pp.126-131, 1993. https://doi.org/10.1016/0022-3913(93)90006-A
  9. J. Haywood, R. M. Basker, C. J. Watson, and D. J. Wood, "A comparison of three hard chairside denture reline materials," Eur J Prosthodont Restor Dent, Vol.11, pp.157-163, 2003.
  10. M. S. Beyli and J. A. von Fraunhofer, "Repair of fractured acrylic resin," J Prosthet Dent, Vol.44, No.4, pp.97-503, 1980.
  11. M. Berge, "Bending strength of intact and repair ed denture base resins," Acta Odontol Scand, Vol.41, pp.187-191, 1983. https://doi.org/10.3109/00016358309162322
  12. J. Bunch, G. H. Johnson, and J. S. Brudvik, "Evaluation of hard direct reline resins," J Prosthet Dent, Vol.57, pp.512-519, 1987. https://doi.org/10.1016/0022-3913(87)90027-8
  13. G. S. Kim, "The effect of denture cleansers on the bond strength and the surface hardness of reline resin to denture base resin," J Korean society Dent Prosthet, Vol.41, No.4, pp.493-502, 2003.
  14. Arima T. Nikawa H, Hamada, and T, Harsini, "Composition and effect of denture base resin surface primers for reline acrylic resins," J Prosthet Dent, Vol.75, pp.457-462, 1996. https://doi.org/10.1016/S0022-3913(96)90044-X
  15. P. K. Vallittu, V. P. Lassila, and R. Lappalainen, "Wetting the repair surface with methyl methacrylate affects the transverse strength of repaired heat-polymerized resin," J Prosthet Dent, Vol.72, pp.639-643, 1994. https://doi.org/10.1016/0022-3913(94)90297-6
  16. C. R. Leles, A. L. Machado, C. E. Vergani, E. T. Giampaolo, and A. C. Pavarina, "Bonding strength between a hard chairside reline resin and a denture base material as influenced by surface treatment," J Oral Rehabil, Vol.28, pp.1153-1157, 2001. https://doi.org/10.1046/j.1365-2842.2001.00786.x
  17. H. Matsumura, N. Tanoue, K. Kawasaki, and M. Atsuta, "Clinical evaluation of a chemically cured hard denture relining material," J Oral Rehabil, Vol.28, pp.640-644, 2001. https://doi.org/10.1046/j.1365-2842.2001.00701.x
  18. Y. Takahashi and J. Chai, "Assessment of shear bond strength between three denture reline materials and a denture base acrylic resin," Int J Prosthodont, Vol.14, pp.531-535, 2001.
  19. H. Shimizu, T. Ikuyama, E. Hayakawa, F. Tsue, and Y. Takahashi, "Effects of surface preparation using ethyl acetate on the repair strength of denture base resin," Acta Odontol Scand, Vol.64, pp.159-163, 2006. https://doi.org/10.1080/00016350500514808
  20. B. Canan, "Flexural properties of repaired heat-polymerising acrylic resin after wetting with monomer and acetone," Gerodontol, Vol.27, pp.217-223, 2010. https://doi.org/10.1111/j.1741-2358.2009.00321.x
  21. H. Kato, H. Matsumura, T. Ide, and M. Atsuta, "Improved bonding of adhesive resin to sintered porcelain with the combination of acid etching and a two-liquid silane conditione," J Oral Rehabil, Vol.28, pp102-108, 2001. https://doi.org/10.1046/j.1365-2842.2001.00627.x
  22. T. Ohkubo, M. Oizumi, and T. Kobayashi, "Influence of methylmercaptan on the bonding strength of autopolymerizing reline resins to a heat-polymerized denture base resin," Dent Mater J, Vol.28, pp.426-432, 2009. https://doi.org/10.4012/dmj.28.426
  23. M. Sadakane, T. Tada, S. Ide, M. Nakayama, N. Nishiya, S. Utsumi, Y. Torii, and K. Inoue, "Effect of additional heat cure on mechanical properties of light-cured composite resins; Part 1 Effect of silane treatment of filler," Jpn J Conserv Dent, Vol.35, pp.677-684, 1992.
  24. G. S. Solnit, "The effect of methacrylate reinforcement with silane treated and untreated glass fibers," J Prosthet Dent, Vol.66, pp.310-314, 1991. https://doi.org/10.1016/0022-3913(91)90255-U
  25. P. K. Vallittu, "Comparison of two different silane compound used for improving adhesion between fibers and acrylic denture base material," J Oral Rehabil, Vol.20, pp.533-539, 1993. https://doi.org/10.1111/j.1365-2842.1993.tb01640.x
  26. R. Newburg and C. H. Pameijer, "Composite resins bonded to porcelain with silane solution," J Am Dent Assoc, Vol.96, pp.288-291, 1978. https://doi.org/10.14219/jada.archive.1978.0071
  27. H. Kolodney, A. Puckett, B. Kistenmacher, and D. Weems, "Composite to silane-coated alloy bond strength following gypsum invested heat-processing," J Dent Res, Vol.71, p.278, 1992.
  28. K. B. May, M. C. Van Putten, D. A. Bow, and B. R. Lang, "4-META polymethylmethacrylate shear bond strength to titanium," Oper Dent, Vol.22, pp.37-40, 1997.
  29. J. O. Semmelman and P. R. Kulp, "Silane bonding porcelain teeth to actylic," J Am Dent Assoc, Vol.76, p.69, 1968. https://doi.org/10.14219/jada.archive.1968.0017
  30. M. W. Daniel and L. F. Francis, "Silane adsorption behavior, microstructure, and properties of glycidoxypropyltrimethoxy silane-modifiedcollo idal silica coatings," J Colloid Interface Sci, Vol.205, pp.191-200, 1998. https://doi.org/10.1006/jcis.1998.5671
  31. S. K. Brown, "Mechanics of fracture in filled thermosetting resins," Br Polymer J, Vol.12, pp.24-30, 1980.
  32. N. M. Mohsen and R. G. Craig, "Effect of silanation of fillers on their dispersability by monomer systems," J Oral Rehabil, Vol.22, pp.183-189, 1995. https://doi.org/10.1111/j.1365-2842.1995.tb01562.x
  33. J. S. Calais and K. J. M. Soderholm, "Influence of filler type and water, exposure on flexural strength of experimental composite resin," J Dent Res, Vol.67, pp.836-840, 1998.
  34. R. McMoride and G. E. King, "Evaluation of primers used for bonding silicone to denture base materials," J Prosthet Dent, Vol.61, pp.636-639, 1989. https://doi.org/10.1016/0022-3913(89)90292-8
  35. K. J. M. Soderholm, "Degradation of glass filler in experimental composites," J Dent Res, Vol.60, pp.1867-1875, 1981. https://doi.org/10.1177/00220345810600110701
  36. International Organization for standardization, ISO 29022. Dentistry-Dentistry-Adhesion-Notched edge shear bond strength test, Geneva: Switzerland, ISO, 2013.