DOI QR코드

DOI QR Code

Preliminary investigation of Ic homogeneity along the longitudinal direction of YBCO coated conductor tape under tensile loading

  • Dizon, J.R.C. (Department of Mechanical Design Engineering, Andong National University) ;
  • Oh, S.S. (Korea Electrotechnology Research Institute) ;
  • Sim, K.D. (Korea Electrotechnology Research Institute) ;
  • Shin, H.S. (Department of Mechanical Design Engineering, Andong National University)
  • Received : 2013.05.22
  • Accepted : 2013.06.25
  • Published : 2013.06.30

Abstract

In this study, the homogeneity of critical current, $I_c$, along the lengthwise direction in the coated conductor (CC) tape under uniaxial tension was investigated using a multiple voltage tap configuration. Initially, a gradual and homogeneous $I_c$ degradation occurred in all subsections of the tape up to a certain strain value. This was followed by an abrupt $I_c$ degradation in some subsections, which caused scattering in $I_c$ values along the length with increasing tension strain. The $I_c$ degradation behaviour was also explained through n-value as well as microstructure analyses. Subsections showed $I_c$ scattering corresponding to damaged areas of the CC tape revealed that transverse cracks were distributed throughout the gauge length. This homogeneous $I_c$ degradation behaviour under tension is similar with the case under torsion strain but different with the case under hard bending which were previously reported. This behaviour is also different with the case using Bi-2223 HTS tapes under tension strain.

Keywords

References

  1. K. Kakimoto, M. Igarashi, S. Hanyu, Y. Sutoh, T. Takemoto, T. Hayashida, Y. Hanada, N. Nakamura, R. Kikutake, H. Kutami, Y. Iijima, and T. Saitoh, "Long RE123 coated conductors with high critical current over 500 A/cm by IBAD/PLD technique," Physica C, vol. 471, pp. 929-931, 2011. https://doi.org/10.1016/j.physc.2011.05.091
  2. Y Shiohara, M. Yoshizumi, Y. Takagi, and T. Izumi, "Future prospects of high $T_c$ superconductors-coated conductors and their applications," Physica C, vol. 484, pp. 1-5, 2013. https://doi.org/10.1016/j.physc.2012.03.058
  3. M. Oomen, W. Herkert, D. Bayer, P. Kummeth, W. Nick, and T. Arndt, "Manufacturing and test of 2G-HTS coils for rotating machines: Challenges, conductor requirements, realization," Physica C, vol. 482, pp. 111-118, 2012. https://doi.org/10.1016/j.physc.2012.04.021
  4. J. K. Lee, S. H. Park, Y. Kim, S. Lee, H. G. Joo, W. S. Kim, K. Choi, and S. Y. Hahn, "Test results of a 5 kW fully superconducting homopolar motor," Prog. Supercond. Cryo., vol. 15, no. 1, pp. 35-39, 2013. https://doi.org/10.9714/psac.2013.15.1.035
  5. T. Nakamura, "Progress of rotating machine development in Japan", Superconductivity and Cryogenics, vol. 13, no. 2, pp. 1-4, 2011.
  6. M. C. Ahn and T. K. Ko, "Fault Current Limitation by a Superconducting Coil with a Reversely Magnetized Core for a Fault Current Controller," Supercond. Cryo., vol. 14, no. 4, pp. 36-40, 2012. https://doi.org/10.9714/sac.2012.14.4.036
  7. S. J. Jung, G. H. Kim, K. M. Kim, M. W. Park and I. K. Yu, "Stability analysis of an insulationless HTS pancake coil under the magnitude of external magnetic field," Supercond. Cryo., vol. 14, no. 4, pp. 41-45, 2012. https://doi.org/10.9714/sac.2012.14.4.041
  8. H. G. Lee, J. Bascunan and Y. Iwasa, "A high-temperature superconducting double-pancake insert for an NMR magnet," IEEE Trans. App. Supercond., vol. 13, pp. 1546-1549, 2003. https://doi.org/10.1109/TASC.2003.812770
  9. Y. Iwasa, "Case studies in superconducting magnets," 2nd ed., Springer, 2009, pp. 1-218.
  10. D. C. van der Laan, and J. W. Ekin, "Large intrinsic effect of axial strain on the critical current of high temperature superconductors for electric power applications," Appl. Phys. Lett., vol. 90, pp. 052506-1-052506-3, 2007. https://doi.org/10.1063/1.2435612
  11. N. Cheggour, J. W. Ekin, C. L. H. Thieme, Y-Y Xie, V. Selvamanickam, and R. Feenstra, " Reversible axial-strain effect in Y-Ba-Cu-O coated conductors," Supercond. Sci. Tech., vol. 18, pp. S319-S324, 2005. https://doi.org/10.1088/0953-2048/18/12/016
  12. M. Sugano, K. Osamura, W. Prusseit, R. Semerad, K. Itoh, and T. Kiyoshi, "Intrinsic strain effect on critical current and its reversibility for YBCO coated conductors with different buffer layers," Supercond. Sci. Tech., vol. 18, pp. 369-372, 2005. https://doi.org/10.1088/0953-2048/18/3/027
  13. M. Sugano, K. Osamura, W. Prusseit, R. Semerad, K. Itoh and T. Kiyoshi, "Tensile fracture behaviour of RE-123 coated conductors induced by discontinuous yielding in Hastelloy C-276 substrate," Supercond Sci Tech., vol. 18, pp. S344-S350, 2005. https://doi.org/10.1088/0953-2048/18/12/020
  14. H. S. Shin, K. H. Kim, J. R. C. Dizon, T. H. Kim, R. K. Ko, and S. S. Oh, "The strain effect on critical current in YBCO coated conductors with different stabilizing layers," Supercond. Sci. Tech., vol. 18, pp. S364-S368, 2005. https://doi.org/10.1088/0953-2048/18/12/023
  15. H.S. Shin, J. R. C. Dizon, R. K. Ko, T. H. Kim, D. W. Ha, and S. S. Oh, "Reversible tensile strain dependence of the critical current in YBCO coated conductor tapes," Physica C, vol. 463-465, pp. 736-741, 2007. https://doi.org/10.1016/j.physc.2007.04.319
  16. H. S. Shin, M. J. Dedicatoria, , J. R. C. Dizon, H.S. Ha, and S. S. Oh, "Bending strain characteristics of critical current in REBCO CC tapes in different modes," Physica C, vol. 469, pp. 1467-1471, 2009. https://doi.org/10.1016/j.physc.2009.05.067
  17. H. S. Shin, J. R. C. Dizon, T. H. Kim, D. W. Ha, and S. S. Oh, "Critical Current Degradation Behavior in YBCO Coated Conductors under Torsional Strain," IEEE Trans. Appl. Supercond., vol. 17, pp. 3274-3277, 2007. https://doi.org/10.1109/TASC.2007.897458
  18. M. Dedicatoria and H. S. Shin, "Analysis on Stress/Strain Tolerances of Ic in Externally Laminated GdBCO CC Tapes," submitted to IEEE Trans. Appl. Supercond., vol. 23, pp. 8400404, 2013. https://doi.org/10.1109/TASC.2012.2232960
  19. S. Ochiai, T. Nagai, H. Okuda, S. S. Oh, M. Hojo, M. Tanaka, M. Sugano, K. Osamura, "Tensile damage and its influence on the critical current of Bi2223/Ag superconducting composite tape," Supercond. Sci. Tech., vol. 16, pp. 988-994, 2003. https://doi.org/10.1088/0953-2048/16/9/305
  20. Y. Mukai, J.K. Shin, S. Ochiai, H. Okuda, M. Sugano, and K. Osamura, "The influence of tensile strain to critical current of Bi2223 composite tape", Physica C, vol. 468, pp. 1801-1804, 2008. https://doi.org/10.1016/j.physc.2008.05.088
  21. A. K. Ghosh, "V-I transition and n-value of multifilamentary LTS and HTS wires and cables," Physica C, vol. 401, 15-21, 2004. https://doi.org/10.1016/j.physc.2003.09.006
  22. H. S. Shin and K. Katagiri, "Influence of external reinforcement on stress/strain characteristics of critical current, Ag/BSCCO superconducting tapes," Proc. Int. Workshop on Mechano- electromagnetic property of composite superconductors, pp. 31-34, 2001.
  23. A. Mbaruku and J. Schwartz, "Statistical analysis of the electromechanical behavior of AgMg sheathed Bi2Sr2CaCu2O8+x superconducting tapes using Weibull distributions," J. Appl. Physics, vol. 101, p. 073913, 2007. https://doi.org/10.1063/1.2715844

Cited by

  1. Variation of Local Critical Current Due to Mechanical Strain in RCE-REBCO Coated Conductors vol.24, pp.3, 2014, https://doi.org/10.1109/TASC.2013.2281788