Progress in Superconductivity and Cryogenics (한국초전도ㆍ저온공학회논문지)

The Korean Society of Superconductivity and Cryogenics (한국초전도저온학회)
권호 표지
DOI QR코드

DOI QR Code

Mechanical and electro-mechanical analysis in differently stabilized GdBCO coated conductor tapes with stainless steel substrate

  • Nisay, Arman R. (Department of Mechanical Design Engineering, Andong National University) ;
  • Shin, Hyung-Seop (Department of Mechanical Design Engineering, Andong National University)
  • Received : 2013.05.28
  • Accepted : 2013.06.25
  • Published : 2013.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

The understanding of the strain dependence of critical current, $I_c$, in the reversible region is important for the evaluation of the performance of coated conductor (CC) tapes in practical applications. In this study, the stress/strain tolerance of $I_c$ in GdBCO CC tapes with stainless steel substrate stabilized by additional Cu and brass laminate was analyzed quantitatively through $I_c$-strain measurement at 77 K under self-field. The variation in irreversible strain limits of CC tapes by the addition of stabilizing layers was analyzed through the consideration of the pre-strain induced on the GdBCO coating film. The results were then compared with the ones previously reported for GdBCO CC tapes with Hastelloy substrate. As a result, GdBCO CC tapes with stainless steel substrate showed much higher strain tolerance of $I_c$ as compared with those adopting Hastelloy substrate.

Keywords

References

  1. M. Ohya, Y. Ashibe, M. Watanabe, T. Minamino, H. Yumura, T. Masuda, and T. Kato, "Development of RE-123 superconducting cable," IEEE Trans. Appl. Supercond., vol. 19, no. 3, pp. 176-1769, 2009.
  2. M. Iwakuma, Y. Hase, T. Satou, A. Tamioka, M. Konno, Y. Iijima, T. Saitoh, Y. Yamada, T. Izumi, and Y. Shiohara, "Production and Test of a REBCO Superconducting Synchronous Motor," IEEE Trans. Appl. Supercond., vol. 19, no. 3, pp. 1648-51, 2009. https://doi.org/10.1109/TASC.2009.2017831
  3. D. W. Hazelton, V. Selvamanickam, J. M. Duval, D. C. Larbalestier, W. D. MArkiewicz, H. W. Weijers, and R. L. Holtz, "Recent Developments in 2G HTS Coil Technology," IEEE Trans. Appl. Supercond., vol. 19, no. 3, pp. 2218-22, 2009. https://doi.org/10.1109/TASC.2009.2018791
  4. K. Watanabe, S. Awaji, G. Nishijima, T. Kiyoshi, H. Kumakura, S. Hanai, K. Koyanagi, and M. Ono, "20 T compact superconducting outsert employing Y123 coated conductors for a 45 T hybrid magnet," IEEE Trans. Appl. Supercond., vol. 19, no. 3, pp. 1592-95, 2009. https://doi.org/10.1109/TASC.2009.2018222
  5. J. K. Lee, S. H. Park, Y. Kim, S. Lee, H. G. Joo, W. S. Kim, K. Choi, and S. Y. Hahn, "Test results of a 5 kW fully superconducting homopolar motor," Prog .in Supercond. and Cryo., vol. 15, no. 1, pp. 35-39, 2013.
  6. J. W. Ekin, "Experimental Techniques for Low-temperature Measurements," Oxford University Press Inc., New York, 2006.
  7. D. C. van der Laan, and J. W. Ekin, "Large intrinsic effect of axial strain on the critical current of high-temperature superconductors for electric power applications," Appl. Phys. Lett., vol. 90, pp. 052506, 2007. https://doi.org/10.1063/1.2435612
  8. M. Sugano, T. Nakamura, T. Manabe, K. Shikimachi, N. Hirano, and S. Nagaya, "The intrinsic strain effect on critical current under a magnetic field parallel to the c-axis for a MOCVD-YBCO coated conductor," Supercond. Sci. Technol., vol. 21, no. 11, pp. 115019, 2008. https://doi.org/10.1088/0953-2048/21/11/115019
  9. H. S. Shin, and M. J. Dedicatoria, "Variation of the strain effect on the critical current due to external lamination in REBCO coated conductors," Supercond. Sci. Technol., vol. 25, pp. 054013, 2012. https://doi.org/10.1088/0953-2048/25/5/054013
  10. A. Kinoshita, K. Takahashi, H. Kobayashi, Y. Yamada, A. Ibi, H. Fukushima, M. Konishi, S. Miyata, Y. Shiohara, T. Kato, and T. Hirayama, "Investigation of a thick PLD-GdBCO and $ZrO_2$ doped GdBCO coated conductors with high critical current on PLD-$CeO_2$ capped IBAD-GZO substrate tapes," Supercond. Sci. Technol., vol. 19, pp. 924, 2006. https://doi.org/10.1088/0953-2048/19/9/007
  11. R. Fuger, M. Inoue, K. Higashikawa, T. Kiss, M. Namba, S. Awaji, K. Watanabe, A. Ibi, H. Fukushima, Y. Yamada, and T. Izumi, "Evaluation of current transport properties of $GdBa_2Cu_3O_{7-{\delta}}$ coated conductors over a wide range of temperature and external magnetic fields," J. Phys.: Conf. Ser., vol. 234, pp. 022009, 2010. https://doi.org/10.1088/1742-6596/234/2/022009
  12. M. J. Dedicatoria, H. S. Shin, H. S. Ha, S. S. Oh, and S. H. Moon, "Electro-mechanical property evaluation of REBCO coated conductor tape with stainless steel substrate," Supercond. Cryo., vol. 12, no. 4, pp.20-23, 2010
  13. N. Cheggour, J. W. Ekin, C. C. Clickner, D. T. Verebelyi, C. L. H. Thieme, R. Feenstra, and A. Goyal, "Reversible axial-strain effect and extended strain limits in Y-Ba-Cu-O coatings on deformation-textured substrates," Appl. Phys. Lett., vol. 83, pp. 4223-5, 2003. https://doi.org/10.1063/1.1628818
  14. M. Sugano, K. Osamura, W. Prusseit, R. Semerad, T. Kuroda, K. Itoh, and T. Kiyoshi, "Irreversible strain dependence of critical current in 100 A class coated conductors," IEEE Trans. Appl. Supercond., vol. 15, no. 2, pp. 3581-84, 2005. https://doi.org/10.1109/TASC.2005.849365
  15. N. Cheggour, J. W. Ekin, Y. Y. Xie, V. Selvamanickam, C. L. Thieme, and D. T. Verebelyi, "Enhancement of the irreversible axial-strain limit of Y-Ba-Cu-O coated conductors with the addition of a Cu layer," Appl. Phys. Lett., vol. 87, pp. 212505, 2005. https://doi.org/10.1063/1.2136231
  16. N. Cheggour, J. W. Ekin, C. L. H. Thieme, Y. Y. Xie, V. Selvamanickam, and R. Feenstra, "Reversible axial-strain effect in Y-Ba-Cu-O coated conductors," Supercond. Sci. Technol., vol. 18, pp. S319-S324, 2005. https://doi.org/10.1088/0953-2048/18/12/016
  17. H. S. Shin, K. H. Kim, J. R. C. Dizon, T. Y. Kim, R. K. Ko, and S. S. Oh, "The strain effect on critical current in YBCO coated conductors with different stabilizing layers," Supercond. Sci. Technol., vol. 18, pp. S364-S368, 2005. https://doi.org/10.1088/0953-2048/18/12/023
  18. M. J. Dedicatoria, and H. S. Shin, "Analysis on stress/strain tolerances of Ic in externally laminated GdBCO CC tapes," IEEE Trans. Appl. Supercond., vol. 23, no. 3, pp. 8400504, 2013. https://doi.org/10.1109/TASC.2012.2234196
  19. K. Osamura, S. Machiya, Y. Tsuchiya, and H. Suzuki, "Internal strain and mechanical properties at low temperatures of surround Cu stabilized YBCO coated conductor," IEEE Trans. Appl. Supercond., vol. 20, pp. 1532-1536, 2010. https://doi.org/10.1109/TASC.2010.2042437
  20. M. J. Dedicatoria, J. R. C. Dizon, H. S. Shin, and K. D. Sim, "Establishment of CTE measurement procedure for PPLP at 77 K for HTS power cables using double extensometers," Supercond. and Cryo., vol. 14, no. 4, pp. 24-27, 2012.

Cited by

  1. Delamination behaviour in differently copper laminated REBCO coated conductor tapes under transverse loading vol.504, 2014, https://doi.org/10.1016/j.physc.2014.02.011
  2. Evaluation of the electromechanical properties in GdBCO coated conductor tapes under low cyclic loading and bending vol.29, pp.1, 2016, https://doi.org/10.1088/0953-2048/29/1/014001
  3. High Temperature Superconducting GdBCO Conductor Laminated with Al Alloy Tapes 2016, https://doi.org/10.1109/TASC.2016.2517202
  4. Evaluation of Irreversible Strain/Stress Limits for Ic Degradation in Practical REBCO CC Tapes Under Uniaxial Tension vol.28, pp.4, 2018, https://doi.org/10.1109/TASC.2017.2788078
  5. Stress–Strain Relationship, Critical Strain (Stress) and Irreversible Strain (Stress) of IBAD-MOCVD-Based 2G HTS Wires Under Uniaxial Tension vol.26, pp.4, 2016, https://doi.org/10.1109/TASC.2016.2515988
  6. Experimental measurement of characteristic Ic (ε, θ, B) response in GdBa2Cu3Oδ coated conductor tapes under low magnetic field at 77 K vol.86, pp.3, 2015, https://doi.org/10.1063/1.4915320
  7. Ic Response with High Magnetic Field, Low Temperature, and Uniaxial Strain in REBCO Coated Conductor Tapes 2016, https://doi.org/10.1109/TASC.2016.2521742
  8. Charge–Discharge and Thermal–Electrical Characteristics of GdBCO Coils Wound With Various Types of Grease as an Insulation Material vol.26, pp.4, 2016, https://doi.org/10.1109/TASC.2016.2530747
  9. Influence of brass laminate volume fraction on electromechanical properties of externally laminated coated conductor tapes vol.18, pp.3, 2016, https://doi.org/10.9714/psac.2016.18.3.006
  10. Improvement of Degradation Characteristics in a Large, Racetrack-shaped 2G HTS Coil for MW-class Rotating Machines vol.13, pp.3, 2018, https://doi.org/10.5370/jeet.2018.13.3.1166
  11. Design, construction, and operation of an 18 T 70 mm no-insulation (RE)Ba2Cu3O7−x magnet for an axion haloscope experiment vol.91, pp.2, 2020, https://doi.org/10.1063/1.5124432