한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)
- 제4권3호
- /
- Pages.5-12
- /
- 2005
- /
- 1598-6721(pISSN)
- /
- 2288-0771(eISSN)
Wire-Cut EDM에서 가공조건에 따른 STD11의 가공특성에 관한 연구
A Study on the Characteristics to working Condition of STD11 in Wire-Cut EDM
- 이홍길 (경남대학교 대학원 기계공학과) ;
- 김원일 (경남대학교 기계공학부) ;
- 이윤경 (경남대학교 기계공학부) ;
-
왕덕현
(경남대학교 기계공학부) ;
- 김종업 (창원기능대학 컴퓨터응용기계과)
- Lee, Hong-Gil (FANUC KOREA) ;
- Kim, Won-Il ;
- Lee, Yun-Kyung ;
-
Wang, Duk-Hyun
;
- Kim, Jong-Up
- 발행 : 2005.09.30
초록
In wire discharge machining which is using STD 11 as die materials, the major factors of machining speed are discharge voltage, discharge current, and discharge time. All of the three factors give the effect. Increasing of the discharge pulse time gets groove width wider and it relatively increases surface roughness and clearance. If no load voltage is decreased, surface roughness is good but it decreases machining speed. If on time is increased, machining speed will get faster and clearance and offset value also get bigger.
키워드