Laser Process Proximity Correction for Improvement of Critical Dimension Linearity on a Photomask

  • Park, Jong-Rak (Department of Photonic Engineering, chosun University) ;
  • Kim, Hyun-Su (Department of Photonic Engineering, chosun University) ;
  • Kim, Jin-Tae (Department of Photonic Engineering, chosun University) ;
  • Sung, Moon-Gyu (Photomask Team, Samsung Electronics Co., Ltd.) ;
  • Cho, Won-Il (Photomask Team, Samsung Electronics Co., Ltd.) ;
  • Choi, Ji-Hyun (Photomask Team, Samsung Electronics Co., Ltd.) ;
  • Choi, Sung-Woon (Photomask Team, Samsung Electronics Co., Ltd.)
  • Received : 2004.06.15
  • Published : 2005.04.30

Abstract

We report on the improvement of critical dimension (CD) linearity on a photomask by applying the concept of process proximity correction to a laser lithographic process used for the fabrication of photomasks. Rule-based laser process proximity correction (LPC) was performed using an automated optical proximity correction tool and we obtained dramatic improvement of CD linearity on a photomask. A study on model-based LPC was executed using a two-Gaussian kernel function and we extracted model parameters for the laser lithographic process by fitting the model-predicted CD linearity data with measured ones. Model-predicted bias values of isolated space (I/S), arrayed contact (A/C) and isolated contact (I/C) were in good agreement with those obtained by the nonlinear curve-fitting method used for the rule-based LPC.

Keywords

References

  1. International Technology Roadmap for Semiconductors (ITRS) ITRS
  2. J. Korean Phys. Soc. v.41 no.6 Process Study of a 200 nm Laser Pattern Generator Oh, H.K.
  3. Proc. SPIE v.4889 Process Bias Control with Thin Cr Film Blanks for 90 nm-node Reticle Fabrication Sato, Y.;Handa, H.;Kushida, Y.;Asai, S.;Maruyama, H.;Miyahara, Y.;Naitoh, M.;Hikichi, R.;Kawasaki, Y.;Miyashita, H.;Noguchi, S.
  4. Resolution Enhancement Techniques in Optical Lithography Wong, A.K.
  5. J. Korean Phys. Soc. v.40 no.1 Monte-Carlo Based Optical Proximity Correction of DRAM Storage Capacitors and Hammer Heads Kim, J.S.;Park, K.C.;Kim, Y.D.;Oh, Y.H.;Lee, J.C.;Go, C.S.;Lim, S.
  6. J. Korean Phys. Soc. v.40 no.4 Modification of the Development Parameter for a Chemically Amplified Resist Simulator Seo, E.J.;Bak, H.J.;Kim, S.K.;Sohn, Y.S.;Oh, H.K.
  7. J. Korean Phys. Soc. v.41 no.4 Bulk Image Formation of Scalar Modeling in a Photoresist Kim, S.K.;Oh, H.K.
  8. Proc. SPIE v.3334 Process Proximity Correction Using an Automated Software Tool Maurer, W.;Dolainsky, C.;Thiele, J.;Friedrich, C.;Karakatsanis, P.
  9. Loading Effect Correction with CATS: An Application Note van Adrichem, P.
  10. ETRI J. v.26 no.4 A Plasma-Etching Process Modeling Via a Polynomial Neural Network Kim, D.;Kim, B.;Park, G.T.
  11. Proc. SPIE v.4691 Optical Lithography Simulation Considering Impact of Mask Errors Kim, H.B.;Ma, W.K.;Ahn, C.N.;Shin, K.S.