Priming Conditions to Improve Germination of Salvia (Salvia splendens F.) Seeds

샐비아(Salvia splendens F.) 종자의 발아촉진을 위한 Priming 조건에 관한 연구

  • 정연옥 (진주교육대학교 실과교육과) ;
  • 강성모 (경상대학교 농과대학 원예학과) ;
  • 조정래 (경상대학교 농과대학 원예학과)
  • Published : 2000.04.30

Abstract

This experiment was conducted to determine the effect of chemicals and their concentrations, priming temperature and duration, and different germination temperature on germinability of salvia seeds. The highest percentage of germination was obtained with 50 or 100 mM $KH_2PO_4$, or with -0.50 or -0.75 MPa PEG 8000. When number of days to attain 50% of the final germination percentage (T50) and mean number of days to germination (MDG) were taken into account, 50 mM $KH_2PO_4$ or -0.50 MPa PEG was most effective for early germination. No seeds germinated when primed in $K_3PO_4$ or NaOH solution. Priming the seeds at $20^{\circ}C$ was better than priming at $15^{\circ}C$ or $25^{\circ}C$. Priming at $20^{\circ}C$ for 4 or 6 days reduced the MDG by 2.3 days compared with nonprimed seeds. Seeds primed with -0.50 MPa PEG at $20^{\circ}C$ showed a high germination percentage with reduced T50 and MDG. When seeds were primed in a mixture of -0.50 MPa PEG and 50 mM $KH_2PO_4$ solution and germinated at $30^{\circ}C$ or $35^{\circ}C$, percent germination was lower than nonprimed seeds. However, the combined treatment retained the priming effect for reducing T50 and MDG.

샐비아 종자의 발아촉진을 위하여 priming 약제의 종류와 농도, priming시 처리온도와 처리기간, 그리고 priming후 발아온도에 따른 효과를 검토하였다. 샐비아 종자는 50mM 혹은 100mM $KH_2PO_4$와 -0.50MPa 혹은 -0.75MPa PEG 8000에서 priming 하였을 때 발아율이 가장 높았다. 그리고 T50과 평균발아소요일수(MDG)는 50mM $KH_2PO_4$와 -0.50MPa PEG 처리 시 단축효과가 가장 크게 나타나 초기발아율에 향상에 효과적이었다. 그러나 $K_3PO_4$ 및 NaOH 처리에서는 전혀 발아되지 않았다. 처리온도에 따라서는 $15^{\circ}C$$25^{\circ}C$ 처리에 비하여 $20^{\circ}C$ 처리가 가장 효과적이었으며, $20^{\circ}C$에서 4일 및 6일 처리 시 무처리에 비하여 MDG가 2.3일 단축되었다. -0.50MPa PEG에서 priming후 발아온도에 따라서는 $20^{\circ}C$에서 발아율이 높았으며, T50 및 MDG가 단축되었는데 이러한 경향은 $10^{\circ}C$$35^{\circ}C$에서 더 크게 나타났다. 그리고 -0.50 MPa PEG에 50mM $KH_2PO_4$ 혼용처리 시는 $10^{\circ}C$를 제외하고는 모든 발아온도에서 무처리에 비하여 발아율이 낮아지는 경향이었지만 T50 및 MDG의 단축효과는 그대로 유지되었다.

Keywords