Journal of the Korean Society of Manufacturing Technology Engineers (한국생산제조학회지)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

A Study for Cutting Resistance of TiN Coated Tools

TiN 코팅 공구의 절삭저항에 관한 연구

  • Published : 2000.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

By using AIP(Arc Ion Plating) of a physical vapor deposition for the first time in Korea a ceramic tool whose surface is coated single layeredly with TiN is developed. In addition cutting resistance appearing in the process of finishing cut of hardened carbon tool steel STC3 is studied. The principal and radial components of cutting resistance in those cutting conditions appear to be the same or similar and the feed component is relatively small. The feed component is found to be in proportion to cutting width and the radial component in proportion to cutting thickness. Owing to coating the cutting resistance of a TiN coated ceramic tool increas-es compared with that of a general ceramic tool.

Keywords

References

  1. Study on Lathe Turning of Carbon Steel Quenched v.36 no.9 Kumabe J.;Daimon, M.;Taniguchi, O.
  2. j. of Engineering for Industry v.114 Turning Process Identification through Force Transient R. Nair;K. Danai;S. Malking
  3. Wear of CBN Cutting Tools v.45 no.2 Narutaki, N.;Yamane, Y.;Takeuchi, M.
  4. On the Light Cutting of the Hardened Steel v.46 no.8 Sakemoto, M.;Matsuno, J.
  5. Proc. 4th. Int. Conf. Prod. Eng. Coated Carbides-Past Present and Future Suh, N.P.
  6. Study on Surface Roughness in Turning v.33 no.10 Takeyama, H.;Ono, T.;Miyasaka, K.
  7. Proc. Int. Mech. Eng. Part C. v.201 no.3 Allowing for Nose Radius Effects in Predicting the Chip Flow Direction and Cutting Forces in Bar Turning Young, H. Y.;Mathew, P.;Oxely, P.L.B.
  8. 세라믹공구와 TiN 피복 세라믹 공구의 초기파손에 관한 비교연구 v.7 no.4 이명재;유봉환
  9. 숭실대학교 박사학위 논문 선삭에서 피복 세라믹공구의 절삭 저항 특성 이명재
  10. Size Effect in Metal Cutting Force v.31 no.3 Size Effect in Metal Cutting Force Nakayama, K.;Tamura, K.
  11. Annals of the CIRP v.25 no.1 On the Storage of Metal Cutting Force Nakayama, K.;Arai, M.