• Journal of the KSME
• /
• v.52 no.2
• /
• pp.43-47
• /
• 2012

현재 난삭재 가공에는 연삭가공기술이 널리 쓰이고 있다. 하지만 연삭가공은 냉각액, 절삭유 등의 소모가 많아 환경에 나쁜 영향을 미치고 에너지 소모도 크다. 최근에 LAM(레이저 보조가공) 등의 기술개발이 이루어져 기존보다 더 효율적으로 난삭재를 가공할 수 있게 되었다. 이 글에서는 환경 친화적 난삭재 절삭가공기술 동향에 대해 소개한다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.12 no.1
• /
• pp.25-31
• /
• 2003

• The Optical Journal
• /
• s.125
• /
• pp.80-80
• /
• 2010

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.1
• /
• pp.29-33
• /
• 2014

Recently, Difficult-to-cut materials are used in many manufacturing industry. But the difficult-to-cut materials are difficult-to-cutting process. So difficult to cut material cutting process was used after heat treatment through preheating for easy cutting process. In this study, Inconel 625 was preheating using laser heat source in computer simulation. Laser heat source temperature applied $1290^{\circ}C$ that suitable preheating temperature for Inconel 625. And temperature effects such as temperature distribution for moving heat source studied apply to similar actual process condition. Simulation results for heat treatment effects through temperature distribution verified.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.17-21
• /
• 1992

최근 들어 공작기계 자동화의 보편화로 절삭가공작업은 고속화, 정밀화되고 있어 생산성을 높이고 있다. 하지만 이러한 생산성의 증가는 단위시간당 chip생산량을 증가시켰으며, 이에 따라 효율적이면서 바람직한 chip처리가 생산성 향상과 연관되어 매우 중요한 문제로 대두되었다. 본 연구에서는 부착장애형 chip breaker를 설치한 insert 공구를 이용, 피삭재로서 내식성, 내마모성을 기계적 성질이 우수하여 근래 산업의 여러 분야에서 각광받고 있는 난삭재 STS304를 절삭하였다. 난삭재 STS304연질금속으로서, 자유표면이 다소 매끄러운 일반재료와 달리 chip의 단면이 어느 정도 규칙적인 톱니형 chip을 발생한다. 그러므로 부착장애형 chip breaker의 각 및 거리, 기타 각 조건을 이용하여 STS304를 절삭특성 및 chip 조절상태를 관찰하고, 기존의 실험에서 자주 이용되었던 연강과 STS304의 비교절삭을 행하여 chip형태등을 비교하여 보는 것도 난삭재의 절삭가공기술 진전에 일조하리라 생각한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.10a
• /
• pp.63-67
• /
• 2001

근래 가공소재로 폭넓게 활용되고 있는 신소재의 대부분은 난삭재로 분류되고 있으며 난삭재 사공에 대한 연구도 활발하게 진행되고 있다. 난삭성에 영향을 미치는 민감한 요인은 재표특성과 가공요소의 복합성을 들 수 있고, 난삭재의 가공은 재료마다 그 최상요건이나 가공방법이 다르므로 일률적인 취급은 곤란하여 각각의 특성을 정확하게 파악하는 것이 중요하다고 하겠다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.327-328
• /
• 2008

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.3 no.2
• /
• pp.3-9
• /
• 2004

The main objectives of this paper are to determine optimum cutting conditions using experimental design method to manufacture pedicle screws. Generally, titanium alloys are known as difficult-to cut materials. In the machining of titanium alloy, high cutting temperature and strong chemical affinity between the tool and the work material are generated because of Its low thermal conductivity and chemical reactivity. Such phenomenon cause increase of tool wear and deterioration of surface quality. Thus, in this paper, required experimental investigations are performed to evaluate the machinability of titanium materials With tungsten carbide tools Required simulation and experiments are performed, and the results are investigated.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.365-369
• /
• 2004

The Advantages of hot machining are the reduction of cutting forces, tool wear, and the increase of material removal rates. In this study, a hot-machining using gas flame heating characteristics of milling by CBN tip was analyzed, and the influence of the surface temperature and the depth of cut on the tool life were investigated. The results show that hot machining of tungsten carbide-alloyed is more effective than conventional machining. In addition, some advantages obtained from hot machining, such as decrease of tool wear and cutting force, high surface quality.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.2
• /
• pp.87-95
• /
• 2000

By using AIP(Arc Ion Plating) of a physical vapor deposition for the first time in Korea a ceramic tool whose surface is coated single layeredly with TiN is developed. In addition cutting resistance appearing in the process of finishing cut of hardened carbon tool steel STC3 is studied. The principal and radial components of cutting resistance in those cutting conditions appear to be the same or similar and the feed component is relatively small. The feed component is found to be in proportion to cutting width and the radial component in proportion to cutting thickness. Owing to coating the cutting resistance of a TiN coated ceramic tool increas-es compared with that of a general ceramic tool.