• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.1
• /
• pp.85-90
• /
• 2015

The objective of this study was comparison of seed yields according to different seeding rates, seeding time and application of chemical fertilizations in Yanji region of China. The experiment was conducted on commercial farmland at Yanji region in 2013. All the experimental fields were designed following randomized block design with 3 replicates. The plant spacing was applied as $65{\times}1cm$ distance. To check the effect of seeding rate, two different seeding rate, 0.2 kg/0.1ha and 0.5 kg/0.1ha were applied. The higher seed yield was observed in low seeding rate (0.2 kg/0.1ha). The application of fertilizer (mixture of N and P) showed different results following different experimental fields. However, there were little positive effects following fertilizer application into commercial farmland. When we compare seed yields between two different seeding dates, $4^{th}$ May and $29^{th}$ May, the earlier seeding date ($4^{th}$ May) showed higher seed yields. In considering these results, low seeding rate and early seeding time is important for getting high camelina seed yields.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.513-513
• /
• 2009

최근 바이오디젤의 원료로 미세조류가 많은 관심을 끌고 있다. 미세조류는 물, 이산화탄소와 태양광을 이용해 광합성 성장이 가능하며, 지질(오일) 성분이 풍부하여 바이오디젤의 원료로 이용할 수 있다. 미세조류는 단위 면적당 오일 생산량이 곡물류의 50-100배 이상이며, 이산화탄소를 기질로 이용하므로 온실가스 직접 저감이 가능하다. 또한 배양시 비경작지나 황무지를 사용할 수 있으므로 기존 식용작물과 경쟁하지 않으며, 하수, 해수, 폐수 등 다양한 물자원을 이용할 수 있다. 본 연구에서는 고농도 $CO_2$에 내성을 지닌 Chlorella sp. KR-1을 대상으로 1 L 규모 기포탑 광생물반응기에서 균체 성장 및 지질(바이오오일) 합성에 대한 $CO_2$ 농도, 가스 공급속도, 질산염 농도 등 환경 및 영향 조건의 영향을 조사하였다. 가스 공급속도 0.4 L/min에서 $CO_2$ 농도를 0.03-20% 범위에서 조사하였을 때 최대 균체성장은 $CO_2$ 10%에서 관찰되었다. 균체내 지방산 함량은 $CO_2$ 농도 0.03%에서 가장 낮았고, 5-20% 범위에서는 $CO_2$ 농도 증가에 따라 감소하는 경향이 관찰되었다. 가스 공급속도를 0.2 L/min에서 0.8 L/min으로 증가시켰을 때 최대 균체농도는 0.6-0.8 L/min의 범위에서 관찰되었고, 생체내 최대 지방산 함량은 0.4 L/min에서 관찰되었다. Nitrate 농도 1-20 mM 범위에서 최종 균체농도는 nitrate 농도 증가에 따라 10mM까지 증가하였으나 그 이상에서는 증가하지 않았다. 반면 지방산 함량은 nitrate 농도 증가에 따라 감소하는 경향이 관찰되었다. 본 실험에서 얻은 최대 지방산 생산량은 1,100 mg/L이었으며, 주요 지방산은 C10:0(1.7%), C16:0(28.5%), C18:0(11%), C18:1n9c(25.9%), C18:2n6c(26.3%), C18:3n3(6.6%)이었다. 현재 100 L 규모 광생물반응기에서 석탄발전소 배가스($CO_2$ 12-15%, SOx 50ppm, NOx 100ppm)를 이용한 바이오오일 생산 실험이 진행 중이다.

• Applied Chemistry for Engineering
• /
• v.21 no.5
• /
• pp.542-547
• /
• 2010

n-Paraffin and saturated fatty acid methyl esters in the diesel and bio-diesel fuel crystallize at low temperature. Many articles have addressed various solutions for the low temperature crystallization problem and one of them is the use of methacrylate copolymers. In this work, we synthesized a series of copolymers in the reaction condition of 70 : 30 molar ratio of lauryl methacrylate (LMA) (or stearyl methacrylate (SMA)) and alkyl methacrylates. The structures of the copolymers were characterized by $^1H$-NMR and FT-IR spectroscopy, and the molecular weight of copolymers were obtained from Gel Permeation Chromatography (GPC) method. The concentrations of additives were 500~1000 ppm and 1000~10000 ppm in diesel fuels and bio-diesel fuel (BD5 and BD20), respectively. The addition of copolymers changes the many properties of fuel such as the pour point (PP), cloud point (CP) and cold filtering plugging point (CFPP). For example, the low temperature properties of the copolymers containing SMA ($PSMAmR_2n$) were excellently improved about 15, 7, and $10^{\circ}C$ for PP, CP and CFPP, respectively.

• Korean Journal of Microbiology
• /
• v.48 no.3
• /
• pp.192-199
• /
• 2012

Microalgal biotechnology has gained prominence because of the ability of microalgae to produce value-added products including biodiesel through photosynthesis. However, carbon and nutrient source is often a limiting factor for microalgal growth leading to higher input costs for sufficient biomass production. Use of municipal wastewater as a low cost alternative to grow microalgae as well as to treat the same has been demonstrated in this study using mini raceway open ponds. Municipal wastewater was collected after primary treatment and microalgae indigenous in the wastewater were encouraged to grow in open raceways under optimum conditions. The mean removal efficiencies of TN, TP, COD-$_{Mn}$, $NH_3$-N after 6 days of retention time was 80.18%, 63.56%, 76.34%, and 96.74% respectively. The 18S rRNA gene analysis of the community revealed the presence of Chlorella vulgaris and Scenedesmus obliquus as the dominant microalgae. In addition, 16S rRNA gene analysis demonstrated that Rhodobacter, Luteimonas, Porphyrobacter, Agrobacterium, and Thauera were present along with the microalgae. From these results, it is concluded that microalgae could be used to effectively treat municipal wastewater without aerobic treatment, which incurs additional energy costs. In addition, municipal wastewater shall also serve as an excellent carbon and nitrogen source for microalgal growth. Moreover, the microalgal biomass shall be utilized for commercial purposes.

• Korean Journal of Plant Resources
• /
• v.22 no.1
• /
• pp.1-4
• /
• 2009

This study was carried out to evaluate ecological growth characteristics of forty castor bean collections for biodiesel utilization. The emergence date and it's rate of collections was 15-16 days and 82.5%, respectively. It took 63-68 days from emergence to flowering. Stem length was ranged from 173 to 251 cm with an average 211.8 cm. The average stem diameter was 24.2 cm, and showed the high occurrence as 52.5% at the 20.4-24.9 cm. The node number was widely distributed as 13-22 and the average node number was 18.9. The seed numbers were widely distributed as 7-33ea, and the average liter weight of seed was 502.9 g of which minimum weight was 432.3 g and maximum weight was 572.5 g, and the gap between maximum and minimum was 140.2 g. It showed high difference. The 100 grain weight was distributed as 20.3 g-38.3 g which showed high differences between small grain and large grain collections. The seed numbers per plant were varied as 72 at the minimum and 1,011 at the maximum number, and average seed number was 465.2. The total yields of seed per plant were varied as 20 g-266.2 g, and the average yields were 128.1 g.

• Korean Journal of Plant Resources
• /
• v.23 no.1
• /
• pp.1-6
• /
• 2010

To evaluate agronomic characteristics for the use of biodiesel crop, 328 collections of sunflower (Helianthus annus L.) were obtained from Genebank in Rural Development Adminstration (RDA). The necessary days from seeding to emergence of collections were from 7 to 12 days, and the days to flowering were widely distributed from 55 to 86 days. Stem length ranged from 131 to 345 cm with a mean of 259 cm, and the mean maturing days were 35 days. The number of head flower was 1~23 ea per plant, and the mean size of head flower was 17.6 cm with a range from 14.7 to 21.3 cm (72.8%). The mean seed number per head flower was 1,430 ea, and the weight of seed per plant ranged from 23 to 379 g with a mean of 91.4 g. The mean seed length was 11.7 mm with a range from 9.0 to 21.5 mm, and the mean diameter was 6.4 mm. The mean weight of seed per litter, 1000 grain weight and seed weight per plant were 322.5 g, 63.3 g and 204 g, respectively. Variation of number of head per plant was largest and weight of grain per plant was large in next among growth and grain characteristics. At the results of correlation analysis among characteristics, the seed diameter was getting bigger and the days for flowering dates were prolonged in the higher stem length plant, but the days to maturing and growth duration was shortened.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.664-668
• /
• 2009

"Boram" is a new $F_1$ hybrid of rapeseed (Brassica napus L.) with early maturing, high yield and high oleic acid. This cultivar was developed from the cross between Mokpo-CGMS (male steile line) and 8634-B-1-3-1-8 (restore line) for the production of edible oil and biodiesel in 2006. Yield trials were conducted from 2007 to 2008 and regional adaptation trials were examined at four locations in 2008. "Boram" has green and parted leaf, yellowish flower, and black seed coat. The ripening period of "Boram" is similar to "Sunmang", but 3 days faster than "Tammiyuchae". The average seed yield of the regional adaptation trials was 424 kg/10a, which was 11 and 48% higher than "Sunmang" and "Tammiyuchae" variety. Total oil content of "Boram" was 44.2%. In fatty acid composition, "Boram" has no erucic acid. However, oleic acid content is 68.5%, which is 3.7 and 5.4% higher than "Tammiyuchae" and "Sunmang". And total glucosinolate content was 2.27mg/g. Therefore this variety is recommended as a leading variety at southwestern areas including Jeonnam, Jeonbuk and Kyeongnam provinces and Jeju island of Korea.

• Korean Journal of Breeding Science
• /
• v.42 no.3
• /
• pp.236-240
• /
• 2010

'Jomang' is a new $F_1$ hybrid variety of rapeseed (Brassica napus L.) with early maturation, high yield and high oleic acid. This hybrid variety was developed from the cross between Mokpo-CGMS (male sterile line) and 8516-B-5-6-5-3 (restore line) for the production of edible oil and biodiesel in 2006. Yield trials were conducted from 2007 to 2008, and regional adaptation trials were examined at four locations in 2008. 'Jomang' has green and parted leaf, yellowish flower and black seed coat. The ripening date of 'Jomang' is 1~4 days earlier than 'Sunmang' and 'Tammiyuchae'. The average seed yield of the regional adaptation trials was 406 kg/10a, which was 7% and 42% higher than those of 'Sunmang' and 'Tammiyuchae,' respectively. Total oil content of 'Jomang' was 44.5%. 'Jomang' has no erucic acid in fatty acid composition. However, oleic acid content is 68.2%, which is 3.4% and 5.1% higher than 'Tammiyuchae' and 'Sunmang,' respectively. Total glucosinolate content was 2.31 mg/g. Therefore, this variety is recommended as a leading variety at southwestern area including Jeonnam, Jeonbuk and Kyongnam provinces and Cheju island of Korea.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.7
• /
• pp.1043-1052
• /
• 2019

Active lipase-producing bacterium Burkholderia gladioli Bps-1 was rapidly isolated using a modified trypan blue and tetracycline, ampicillin plate. The electro-phoretically pure enzyme was obtained by purification using ethanol precipitation, ion-exchange chromatography, and gel filtration chromatography. The molecular weight was 34.6 kDa and the specific activity was determined to be 443.9 U/mg. The purified lipase showed the highest activity after hydrolysis with $p-NPC_{16}$ at a pH of 8.5 and $50^{\circ}C$, and the $K_m$, $k_{cat}$, and $k_{cat}/K_m$ values were 1.05 mM, $292.95s^{-1}$ and $279s^{-1}mM^{-1}$, respectively. The lipase was highly stable at $7.5{\leq}pH{\leq}10.0$. $K^+$ and $Na^+$ exerted activation effects on the lipase which had favorable tolerance to short-chain alcohols with its residual enzyme activity being 110% after being maintained in 30% ethanol for 1 h. The results demonstrated that the lipase produced by the strain B. gladioli Bps-1 has high enzyme activity and is an alkaline lipase. The lipase has promising chemical properties for a range of applications in the food-processing and detergent industries, and has particularly high potential for use in the manufacture of biodiesel.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.3
• /
• pp.164-176
• /
• 2012

In the present study, rapeseed flour (RSF), which is a by-product from the production of edible oil and biodiesel extracted from rapeseed, was used to develop alternative adhesives for the production of plywood panels. To examine the effects of the enzyme on the adhesive properties and formaldehyde emission of the RSF-based adhesive resins, three enzymes, such as cellulase (CEL), pectinase (PEC) and protease (ALC), were used either separately or together. As a crosslinking agent, PF prepolymers, which were prepared with 1.5, 1.8 and 2.1 mole formaldehyde and 1 mol phenol (1.8-, 2.1- and 2.4-PF), were added into the RSF hydrolyzates. The adhesive resins formulated with CEL- or CEL-PEC-RSF hydrolyzates and 1.8-F/P PF prepolymers exhibited excellent adhesive strengths and formaldehyde emission. The tensile shear strength and formaldehyde emission of the plywood panels bonded with the formulate resins were satisfied with the minimum requirement of the KS standard for ordinary plywood panels (0.6 N/$mm^2$). In addition, formaldehyde emissions of the plywood panels approached to that of E0 specified in the KS standard (0.5 mg/${\ell}$), and even had much better than those of commercial UF glue mixes. Overall, the use of RSF-based adhesive resins for the production of plywood panels might provide durable adhesive properties and an environmentally friendly substitute for petroleum-based adhesive resins. However, further researches - the increase of solid content of RSF-based adhesives for reducing press time and the microscopic observation of plywood specimen for identifying the relationship between tensile shear strength and the penetration of adhesives into wood structure - are required to commercialize the RSF-based adhesives.