• Journal of Ocean Engineering and Technology
• /
• v.20 no.3 s.70
• /
• pp.103-108
• /
• 2006

It has been well appreciated that reducing weld-induced deformation as law as possible is important during fabrication for a more efficient production of blocks. The weld-induced deformation is more serious in thin plates than in thick plates because heat affect zone of thin plates is wider than that of thick plates and in addition internal and external constraints much more influence upon weld-induced deformation of thin plates. This paper deals with the application of the mechanical tensioning method to butt weld of thin plates to reduce the weld-induced deformation. In order to investigate the quantitative effect of tensioning method upon the reduction of angular deformation and shrinkage in longitudinal and transverse direction of weld line, butt welding test have been carried out for several thin plate specimens with varying plate thickness and magnitude of tensile load. From the present experimental study, it has been found that the tensioning method is very effective on reduction of weld-induced residual stress as well as weld-induced deformation.

• Journal of Welding and Joining
• /
• v.25 no.6
• /
• pp.59-63
• /
• 2007

The weld-induced deformation is more serious in thin plates than in thick plates because heat affect zone of thin plates is wider than that of thick plates and in addition internal and external constraints have much more influence upon weld-induced deformation of thin plates. This paper deals with the application of the mechanical tensioning method to butt weld of thin plates to reduce the transverse and longitudinal deformation. In order to investigate the quantitative effect of tensioning method upon the reduction of angular deformation and shrinkage in longitudinal and transverse direction of weld line, butt welding test has been carried out for several thin plate specimens with varying plate thickness and magnitude of tensile load. From the present experimental study, it has been found that the tensioning method is very effective in reducing the weld-induced residual stress as well as the weld-induced deformation.

• Journal of Contemporary Eastern Asia
• /
• v.20 no.2
• /
• pp.210-236
• /
• 2021

China's Belt and Road Initiative infrastructure connectivity and other projects are presented in much of the discourse as a grand strategy to trap developing nations in debt, to exert asymmetric power and construct a new world economic order. The asymmetric relationship between China and Myanmar might therefore be expected to generate a range of political risks for stakeholders. Myanmar itself presents a "perfect storm" of problems, with dysfunctional governance, civil conflict, under-development and growing economic dependence on China. The Kyaukphyu port project and associated Special Economic Zone in Myanmar's troubled Rakhine state is investigated as a case study of risks on the Belt and Road. While worst case fears China might seize military control of the port appear unlikely, at least in current conditions, empirical observation indicates the complexity on the ground generates an array of other risks - as well as opportunities, should conditions allow. Further, despite challenges and constrained capacity, Myanmar governments have demonstrated agency, including by re-negotiating control and costs of the Kyaukphyu project. The case underlines that conditions are more complicated than simply China's asymmetric power. A sceptical approach is taken to normative discourses in order to build inductive understanding of how stakeholders and local experts perceive dynamics underway. A political risk approach is deployed to develop a framework to identify, analyse and assess risks for actors in relation to the Kyaukphyu project. The research findings are presented on an interim basis, given current constraints on field interviews due to the current crisis.

• Advances in environmental research
• /
• v.12 no.2
• /
• pp.95-111
• /
• 2023

Pollution, climate change, and waste accumulation are only some of the new problems that have arisen because of the exponential population growth of the past few decades. As the global population expands, managing municipal solid trash becomes increasingly difficult. This is by far the most difficult obstacle for governments to overcome, especially in less developed nations. The improper open dumping of trash, which is causing mayhem across the country, has two immediate effects: it contaminates groundwater and surface water. Air pollution and the accumulation of greenhouse gases are both exacerbated by the release of methane and other harmful waste gases. Leachate from the landfill leaks underground and pollutes groundwater. In most cases, leachate moves into the groundwater zone and pollutes it after forming in association with precipitation that infiltrates via waste. This has far-reaching effects on people's health and disturbs the natural environment. This review article critically examines the current state of Solid Waste Management (SWM), addressing both the highlighted concerns and the government management solutions that have been put in place to address these issues. In addition, the constraints, and difficulties that India will face in the future in terms of solid waste management and the role of models for such a system are discussed.

• Nuclear Engineering and Technology
• /
• v.55 no.11
• /
• pp.4112-4119
• /
• 2023

This study employs the microshear test method to examine the local mechanical properties of narrow-gap welded joints, revealing the mechanical inhomogeneity by evaluating the microshear strength, stress-strain curves, and failure strain. On this basis, the influence of weld joints micromechanical inhomogeneity on the crack tip opening displacement (CTOD) fracture toughness is investigated. From the root weld layer to the cover weld layer, the fracture toughness at the center of the weld seam demonstrates an increasing trend, with the experimental and calculated CTOD values showing a good correspondence. The microproperties of the welded joints significantly impact the load-bearing capacity and fracture toughness. During the deformation process of the "low-matching" microregions, the plastic zone expansion is hindered by the surrounding microregion strength constraints, thus reducing the fracture toughness. In contrast, during the deformation of the "high-matching" microregions, the surrounding microregions absorb some of the loading energy, partially releasing the concentrated stress at the crack tip, which in turn increases the fracture toughness.

• Journal of the Korean Geographical Society
• /
• v.47 no.3
• /
• pp.328-346
• /
• 2012

This study provides quantitative constraints on Neogene uplift in the Korean peninsula using onshore paleo-shoreline records and seismic data. The eastern margin of Northeast Asia including Korea sits in the back-arc system behind the Western Pacific Subduction Zone, a complex trench triple junction of the Philippine Sea, Pacific, and Eurasian (Amurian) plates. An analysis of seismic data in the subduction zone shows that the pattern of uplift in the peninsula mirrors the extent of deep seismicity in subducting Pacific plate beneath. Combined with previous tomographic studies it is proposed that uplift is partly driven by asthenospheric upwelling caused by a sinking slab during the Neogene. In addition, the SHmax orientations of E-W and N-S trends in the peninsula are consistent with the prevailing in-situ stress fields in the eastern Eurasian continent generated by various plate boundary forces. The uplift in Korea during the Late Neogene is attributed, in part, to lithospheric failure relating to faulting movements, thus providing a link between dynamic effects of mantle upwelling at sinking slab edge and lithospheric responses driven by plate boundary forces.

• Agribusiness and Information Management
• /
• v.9 no.2
• /
• pp.1-11
• /
• 2017

Introduction: To analyze the impact of marketing losses on efficiency in transacting banana in Kurnool district of SRZ in Andhra Pradesh and to assess the opinions of the farmers on the constraints in transacting banana. Research back ground, Materials and Methods: The study relies exclusively on primary information obtained from the banana farmers of Kurnool District. Purposive sampling procedure was followed for the selection of the study area. Top two mandals in the district and top two villages in each mandal are selected in accordance with the area under cultivation of banana. Probability proportion to size was followed regarding the selection of sample farmers and accordingly 60 marginal, 37 small and 23 other farmers were selected and thereby, the total sample size was 120. Result and Discussion: Three marketing channels were identified in the marketing of banana in Kurnool district viz., Producer ${\rightarrow}$ Local-exporter ${\rightarrow}$ Wholesaler ${\rightarrow}$ Retailer ${\rightarrow}$ Consumer (Channel-I), Producer ${\rightarrow}$ Wholesaler ${\rightarrow}$ Cart-vendor ${\rightarrow}$ Consumer (Channel-II) and Producer ${\rightarrow}$ Juice-holder ${\rightarrow}$ Consumer (Channel-III). With the inclusion of marketing losses in the price spread analysis of banana in all the three channels, the marketing costs of all the intermediaries were increased and thereby, the farmer's share in consumer's rupee and Net Marketing Margins of the agencies are on the decline. So, without inclusion of marketing losses, the farmer's share in consumer's rupee and Net Marketing Margins of all the agencies are overvalued. The higher the marketing losses, the more is the negative impact on farmer's net selling price, net marketing margins of the intermediaries and marketing efficiency. The sample farmers are facing major problems in marketing of banana like frequent price fluctuations, unorganized marketing and lack of transportation facilities on priority basis. Suggestions: It is suggested to educate the farmers regarding the optimum maturity index for harvest, use of mechanical harvesters, proper placement of fruits during storage and ripening, better packaging and cushioning technologies to absorb shocks during transportation, strengthening of storage facilities and transport facilities, encourage co-operative marketing etc., to promote marketing efficiency of banana in the study area.

• Korean Journal of Culture and Social Issue
• /
• v.28 no.3
• /
• pp.483-512
• /
• 2022

This study examined the patterns of coping strategies among Koreans during the early stage of the COVID-19 pandemic, explored the influence of demographic information (gender, age, economic level, household type), along with the unusual experiences due to COVID-19 (fear, stress of COVID, constraints of routine, income risk) on the classification of subclasses, and analyzed the latent profile differences in psychological wellbeing (life satisfaction, depression, and anxiety). An online survey was conducted among Korean Adults(n=600) between April 13, 2020 and 21, when WHO declared COVID-19 a global pandemic and Daegu as well as Gyeongsangbuk-do was nominated as a special disaster zone. First, Latent Profile Analysis (LPA) was used to identify subclasses of coping strategies and results suggested that the 4-class model had the best fit. Second, Class memberships were predicted by gender, age, economic level, as well as fear, stress, constraints of routine, and income risk, among the unusual experiences due to COVID-19. Finally, there are differences in psychological wellbeing among latent profiles. 'High level of adaptive coping group 3' showed the highest level of life satisfaction, 'Adaptive-maladaptive coping group 4' showed the highest level of depression, anxiety. Implications and suggestions are discussed based on the study results.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.4
• /
• pp.91-102
• /
• 2008

This study was conducted to obtain the basic information about Siberia Musk Deer (Moschus moschiferus), and to establish a conservation area for the replacement of Siberia Musk Deer into Mt. Odea National Park, South Korea. We analyzed the main habitat for Siberia Musk Deer restoration in Mt. Odae National Park, Korea. We recorded Siberia Musk Deers' field signs (i.e., bedding sites, feeding areas, feces and tracks), and habitat variables such as nearest distance to the watercourse, trails, slope, aspect, forest type and land cover etc. from Dec. 2004 to Aug. 2007 in Mt. Jiri, Mt. Seorak, and Demilitarized Zone (DMZ). Rocky areas, ridges, mixed coniferous forest (Red pine and Mongolian oak), southern and southeastern slope, elevation of above 800m, and distance from watercourse shorter than 300m etc. were dominant habitat types of Siberia Musk Deer. Based on the significant habitat types, a proper conservation plan should be prepared for the restoration of habitats in order to reintroduce, and to increase the population of Siberia Musk Deer in Mt. Odea National Park, South Korea. Small population size, and limited ecological data are the major constraints for the establishment of conservation areas. Furthermore, other anthropogenic factors including human activities, poaching, and residential area around the park caused the difficulties to qualify as a conservation area. For the successful establishment of conservation area in the future, it is recommended to conduct a comprehensive ecological research, and to survey human disturbances including their impacts on the habitats of Siberia Musk Deer in the Mt. Odea National Park.

• The Korean Journal of Malacology
• /
• v.28 no.3
• /
• pp.277-291
• /
• 2012

Aquaculture is challenged by a number of constraints with future efforts towards sustainable production. Global climate change has a potential damage to the sustainability by changing environmental surroundings unfavorably. The damaging parameters identified are water temperature, sea level, surface physical energy, precipitation, solar radiation, ocean acidification, and so on. Of them, temperature, mostly temperature elevation, occupies significant concern among marine ecologists and aquaculturists. Ocean acidification particularly draws shellfish aquaculturists' attention as it alters the marine chemistry, shifting the equilibrium towards more dissolved CO2 and hydrogen ions ($H^+$) and thus influencing signaling pathways on shell formation, immune system, and other biological processes. Temperature elevation by climate change is of double-sidedness: it can be an opportunistic parameter besides being a generally known damaging parameter in aquaculture. It can provide better environments for faster and longer growth for aquaculture species. It is also somehow advantageous for alleviation of aquaculture expansion pressure in a given location by opening a gate for new species and aquaculture zone expansion northward in the northern hemisphere, otherwise unavailable due to temperature limit. But in the science of climate change, the ways of influence on aquaculture are complex and ambiguous, and hence are still hard to identify and quantify. At the same time considerable parts of our knowledge on climate change effects on aquaculture are from the estimates from data of fisheries and agriculture. The consequences may be different from what they really are, particularly in the temperature region. In reality, bivalves and tunicates hung or caged in the longline system are often exposed to temperatures higher than those they encounter in nature, locally driving the farmed shellfish into an upper tolerable temperature extreme. We review recent climate change and following environment changes which can be factors or potential factors affecting shellfish aquaculture production in the temperate region.