• Ocean Systems Engineering
• /
• 제13권2호
• /
• pp.147-172
• /
• 2023

This study investigates the influence of loading and inflow conditions on tidal turbine performance from a hydrodynamic and hydroacoustic point of view. A boundary element method is utilized for the former to investigate turbine performance at various loading conditions under zero/non-zero yaw inflow. The boundary element method is selected as it has been selected, tested, and validated to be computationally efficient and accurate for marine hydrodynamic problems. Once the hydrodynamic solutions are obtained, such as the time-dependent surface pressures and periodic motion of the turbine blade, they are taken as the known noise sources for the subsequence hydroacoustic analysis based on the Ffowcs Williams-Hawkings formulation given in a form proposed by Farassat. This formulation is coupled with the boundary element method to fully consider the three-dimensional shape of the turbine and the speed of sound in the acoustic analysis. For validations, a model turbine is taken from a reference paper, and the comparison between numerical predictions and experimental data reveals satisfactory agreement in hydrodynamic performance. Importantly, this study shows that the noise patterns and sound pressure levels at both the near- and far-field are affected by different loading conditions and sensitive to the inclination imposed in the incoming flow.

• 패션비즈니스
• /
• 제24권5호
• /
• pp.125-139
• /
• 2020

The fashion industry that perceived the severity of environmental pollution, has sought various methods of sustainable fashion. However, most of the businesses paid attention to the development of materials using industrial waste, or vegan material. Thus, this study aims to present the methods for improvement in creativity for inversely developing the design from patterns and present new approaches by applying the contrarian development of proto to class under the limited condition of material concerning general design, selection of material, and production of sample. In the case of three student teams enrolled in the first semester of the second year, the fabric and used clothing donated by industry were used as material. The whole cut for cutting a single fabric in connected state, and Zero Wastes Design within a rectangular frame of fabric, upcycling of used clothes, and cutting out of Geometric Form are suggested. The team(A) produced a zero-wastes coat and whole-cut Pancho that could be variously represented. The team(B) produced two kinds of asymmetric dress by utilizing used check-patterned shirts through upcycling. The team(C) utilized the fabric in geometric forms such as rectangle, trapezoid, and atypical figure by drawing design within donated fabrics. The items were a dress, blouse, and skirt. Consequently, an opportunity for both academia and industry to present more concrete methods for sustainable fashion and deeply perceive the sustainable fashion is presented along with novel methods for creation by carrying out the composition of pattern and design at the same time.

• Structural Engineering and Mechanics
• /
• 제39권3호
• /
• pp.427-447
• /
• 2011

The progressive collapse phenomenon is generally regarded as dynamic. Due to the impracticality of nonlinear dynamic computations for practitioners, an interest arises for the development of equivalent static pushover procedures. The present paper proposes a methodology to identify such a procedure for sudden column removals, using energetic evaluations to determine the pushover loads to apply. In a dynamic context, equality between the cumulated external and internal works indicates a vanishing kinetic energy. If such a state is reached, the structure is sometimes assumed able to withstand the column removal. Approximations of these works can be estimated using a static computation, leading to an estimate of the displacements at the zero kinetic energy configuration. In comparison with other available procedures based on such criteria, the present contribution identifies loading patterns to associate with the zero-kinetic energy criterion to avoid a single-degree-of-freedom idealisation. A parametric study over a family of regular steel structures of varying sizes uses non-linear dynamic computations to assess the proposed pushover loading pattern for the cases of central and lateral ground floor column failure. The identified quasi-static loading schemes are shown to allow detecting nearly all dynamically detected plastic hinges, so that the various beams are provided with sufficient resistance during the design process. A proper accuracy is obtained for the plastic rotations of the most plastified hinges almost independently of the design parameters (loads, geometry, robustness), indicating that the methodology could be extended to provide estimates of the required ductility for the beams, columns, and beam-column connections.

• 한국광학회지
• /
• 제16권6호
• /
• pp.516-520
• /
• 2005

본 논문에서는 광섬유형 전자 스페클 패턴 간섭계에 적용할 효과적인 위상이동 방법을 제안한다. 광섬유 마이켈슨 간섭계에 4$\pi$ 위상변조를 주기적으로 가하면서 각각 $\pi$의 위상차이를 갖는 4개의 영점위치를 검출하여 CCD 카메라의 이미지 취득신호를 생성한다. 이 신호에 따라 얻어지는 스페클 패턴은 위상추출 과정에 필요한 $\pi$/2 위상차이를 갖게 되며 후처리를 통하여 측정 대상체의 3차원적인 표면 위상정보를 얻게 된다. 환경적인 외란에 비하여 충분히 빠른 위상변조를 가할 경우 귀환제어 없이 빠르고 정확하게 $\pi$/2 위상 이동에 따른 CCD 동작신호를 생성할 수 있었으며, 위상변조기의 비선형적인 동작특성에 영향 받지 않는 실험결과를 얻을 수 있었다. 실험을 통하여 100 Hz의 영상 취득 속도를 얻었고, 25 Hz의 위상변조를 가할 때 출력 위상계단 신호의 오차는 0.6 mrad이었다.

• 한국지능시스템학회논문지
• /
• 제21권4호
• /
• pp.407-413
• /
• 2011

본 연구에서는 가정용 전력 모니터링 시스템을 구현하고 실험가구에 적용하여 평가하였으며, 평가과정에서 확보한 기기별 전력 사용 패턴 정보를 이용하여 자동 기기 식별 알고리즘을 개발하였다. 실험가구에 적용해본 결과, 기기별 전력사용 정보와 월별 예상 사용량 정보가 전력 소비 절감에 도움이 된다는 응답을 얻을 수 있었다. 그리고 시스템을 보다 편리하게 사용하기 위해서는 설치의 편의성과 UI를 개선해야한다는 응답을 얻었다. 본 연구에서는 UI 개선을 위하여 일반냉장고, TV, 전기밥솥, 김치냉장고, 세탁기를 자동으로 식별하는 알고리즘을 구현하였다. 자동 장치 식별 알고리즘은 전력 모니터링 과정에서 수집한 전력 소비 패턴을 관찰하여 Zero-Crossing Rate(ZC), Variation of On State(VO), Slope of On State(SO), Duty Cycle(DC) 등 4가지 특징을 규정하여 이용하였으며, 특징을 적용하는 시간 구간은 기기가 동작하는 시간이 25% 이상이 되는 2시간 길이의 구간을 이용하였다. 제안된 알고리즘은 테스트 set에 동일한 기기를 포함하는 경우 82.1%의 성능을 얻을 수 있었다.

• 한국전자파학회논문지
• /
• 제22권12호
• /
• pp.1132-1138
• /
• 2011

본 논문에서는 간섭 신호 방향으로 넓은 폭의 null(BN)들을 가지도록 하는 선형 배열 안테나 패턴 합성 방법을 새로이 제안한다. 배열 소자들의 가중치들을 최적화시켜 BN을 제어하는 기존의 방법과는 달리, 본 방법에서는 배열계수를 Schelkunoff 다항식으로 변환하고, 이 다항식에 내재된 영점들을 최적 섭동시킴으로써 다중의 BN 방향 및 폭의 제어를 간단히 하였다. 또한, 이 방법은 위상 배열 안테나에도 쉽게 적용됨을 보였다. 도출된 복소 가중치들을 배열계수에 대입함으로써 제안한 방법의 타당성을 수치적으로 검증하였다.

• 한국환경과학회지
• /
• 제15권12호
• /
• pp.1087-1091
• /
• 2006

This paper describes the current spatial patterns of the net primary productivity (NPP) of the terrestrial vegetation and carbon emission (C) in the world due to the burning of fossil fuels in order to clarify the amount of expansion of human activity. The C/NPP value varies spatially from almost zero to several tens of thousand times the local NPP. C/NPP is higher under the condition of extensive human activities due to a high human population density or when the local NPP is extremely low in severe climatic zones. In contrast, the low C/NPP areas are distributed mainly in sparsely populated districts, loading to a low impact of human activity. Although the area where C/NPP is less than 10% accounts for about 70% of the entire land area, one-third of these areas cannot contribute to carbon absorption because of low NPP with a shortage of climatic resources. Since more than half of the areas of the remaining areas are agricultural land and forest ecosystems with high NPP, the possible afforestation area was evaluated to be maximum of $30{\times}10^{6}\;km^{2}$; here only sequestrate carbons that correspond to 2% of the global total NPP are present. These analyses revealed that presently most of the areas where the NPP is high are those exclusively used by humans and that it is difficult for large-scale forest plantations to absorb a substantial amount of the carbon emitted annually by humans.

• 대한기계학회논문집B
• /
• 제20권10호
• /
• pp.3262-3271
• /
• 1996

Flow patterns were measured in a shrouded centrifugal impeller. The flow rate in measurements was fixed at the value corresponding to a nearly zero incidence at the blade inlet. By using a single slanted hot-wire probe and a Kiel probe mounted on the impeller hub disk, the 3-D relative velocities and the rotary stagnation pressures were measured in seven circumferential planes from the inlet to the outlet of impeller rotating at 700 rpm, and the static pressure distribution along flow passage and the slip factor at impeller outlet were calculated from the measured values. From these measured data, the primary and secondary flows, the wake production and the static pressure rise in the impeller passage were investigated. Furthermore, the secondary flow patterns and the wake's location in this impeller passage were compared with those of the unshrouded impeller.

• 한국통신학회논문지
• /
• 제11권5호
• /
• pp.332-339
• /
• 1986

한글문자패튼의 인식율을 향상시키기 위해서 Gaussian 확율밀도 함수를 이용한 형태정규화의 한 방법을 제안한다. 제안된 방법은 입력패튼의 패튼 영역을 추출하여 2변수보간법으로 패튼의 크기를 정규화 한 후, 크기 정규화된 패튼의 상관계수를 0으로 하는 선형변환을 시켜 문자패튼의 기하학적 기울어짐 변형을 정규화시켰다. 입력패튼과 형태정규화된 패튼간의 관계를 이론적으로 해석하고 컴퓨터 시뮬레이션을 통해서 이론의 타당성을 확인하였다.

• 대한기계학회논문집B
• /
• 제22권3호
• /
• pp.346-359
• /
• 1998

The aerodynamic forces and wake structure of the non-rotating downstream circular cylinder, of which the uniform freestream flow is interfered with another spinning upstream cylinder having the same diameter that is located upstream in a line have been investigated experimentally. When the spin rate of the downstream cylinder defined as the ratio of tangential surface velocity of the spinning cylinder to the freestream velocity increases gradually from zero to 1.4, the change of surface pressure distribution, aerodynamic forces of the non-rotating downstream cylinder were measured in case of several distance ratios of 1.5, 3.0, and 4.5 defined as the ratio of distance between the centers of two cylinders to the diameter. The wake flow patterns behind the cylinder were also investigated in each case. From the present experiments, it has been found that the spin rate significantly influences the aerodynamic forces and near-wake flow phenomena of the downstream cylinder in such a way that the drag increases as the spin rate and distance ratio increase and the wake width increases as the distance ratio increases.