• Journal of Korean Society on Water Environment
• /
• v.21 no.2
• /
• pp.169-175
• /
• 2005

This study was carried out to investigate the effects of irrigation water pollution on the yield and grain quality of rice. It acquires fundamental data to set up water quality standards for irrigation and produce agricultural safety products. The correlations of BOD, T-N, T-P, pH, ECw of the irrigation water with yield, grain appearance quality, and the protein content were evaluated. The field and pot experiments were conducted by using Japonica of Oryza sativa L. during 2 years. BOD concentration in irrigation water effects strongly on grain appearance quality and yield of rice. T-N in irrigation water has strong effect on the yield, appearance, and quality of rice. T-P concentration in irrigation water have not any correlation with yield and quality of rice. pH showed strongly negative correlation with maturity ratio(MTR), 1000 grain weight(TGW), and yield of rice(YLD) as r=-0.803~-0.828(p<0.001) and have no effect on the appearance quality of rice. $EC_w$ indicating salt content showed strongly negative correlation with MTR, TGW, number of grains per panicles(NGP), and number of panicles per unit area(NPM) as r=-0.759~-0.798, and with YLD as -0.753.

• Journal of Animal Science and Technology
• /
• v.58 no.2
• /
• pp.5.1-5.9
• /
• 2016

Background: The milk yield can be affected by the frequency of milking per day, in dairy cows. Previous studies have shown that the milk yield is increased by 6.25 % per lactation when the milking frequency is increased from 2 to 3 times per day while the somatic cell count is decreased. To investigate the effect of milking frequency (3X vs. 4X) on milk yield and it's genetic parameters in the first and second lactations of the Iranian Holstein dairy cows, a total of 142,604 test day (TD) records of milk yield were measured on 20,762 cows. Results: Heritability estimates of milk yield were 0.25 and 0.19 for 3X milking frequency and 0.34 and 0.26 for 4X milking frequency throughout the first and second lactations, respectively. Repeatability estimates of milk yield were 0.70 and 0.71 for 3X milking frequency and 0.76 and 0.77 for 4X milking frequency, respectively. In comparison with 3X milking frequency, the milk yield of the first and second lactations was increased by 11.6 and 12.2 %, respectively when 4X was used (p < 0.01). Conclusions: Results of this research demonstrated that increasing milking frequency led to an increase in heritability and repeatability of milk yield. The current investigation provided clear evidences for the benefits of using 4X milking frequency instead of 3X in Iranian Holstein dairy cows.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.3
• /
• pp.297-302
• /
• 2008

Application of genotype by environment ($G\;{\times}\;E$) interaction would be used for identifying optimum test condition of the varietal adaptation in the establishment of breeding purpose. Yield and yield components were used to perform additive main effect and multiplicative interaction (AMMI) analysis. Significant difference for $G\;{\times}\;E$ interaction were observed for all variable examined. For yield, 0.18 of total sum of squares corresponded to $G\;{\times}\;E$ interaction. Correlation analysis was carried out between genotypic scores of the first interaction principal component axis (IPCA 1) for agronomic characters. Significant correlations were observed between IPCA 1 for yield and capsule bearing stem length (CBSL), number of capsule per plant (NOC). The biplot of grain yield means for IPCA1 which accounted for 34% of the variation in total treatment sums of squares showed different reaction according to $G\;{\times}\;E$ interaction, genotypes and environments. Taegu showed relatively lower positive IPCA1 scores, and it also showed smaller coefficient variation of yield mean where it is recommendable as a optimal site for the sesame cultivar adaptation and evaluation trial. In case of variables, Yangbaek and M1 showed relatively lower IPCA1 scores, but the score direction showed opposite each other on the graph. Ansan, Miryang1, Miryang4, and Miryang6 seemed to be similar group in view of yield response against IPCA1 scores. These results will be helpful to select experimental site for sesame in Korea to minimize $G\;{\times}\;E$ interaction for the selection of promising genotype with higher stability.

• Journal of Ginseng Research
• /
• v.40 no.3
• /
• pp.229-236
• /
• 2016

Background: Extraction conditions greatly affect composition, as well as biological activity. Therefore, optimization is essential for maximum efficacy. Methods: Korean Red Ginseng (KRG) was extracted under different conditions and antioxidant activity, extraction yield, and ginsenoside Rg1 and phenolic content evaluated. Optimized extraction conditions were suggested using response surface methodology for maximum antioxidant activity and extraction yield. Results: Analysis of KRG extraction conditions using response surface methodology showed a good fit of experimental data as demonstrated by regression analysis. Among extraction factors, such as extraction solvent and extraction time and temperature, ethanol concentration greatly affected antioxidant activity, extraction yield, and ginsenoside Rg1 and phenolic content. The optimal conditions for maximum antioxidant activity and extraction yield were an ethanol concentration of 48.8%, an extraction time 73.3 min, and an extraction temperature of $90^{\circ}C$. The antioxidant activity and extraction yield under optimal conditions were 43.7% and 23.2% of dried KRG, respectively. Conclusion: Ethanol concentration is an important extraction factor for KRG antioxidant activity and extraction yield. Optimized extraction conditions provide useful economic advantages in KRG development for functional products.

• Korean Journal of Plant Resources
• /
• v.20 no.4
• /
• pp.309-311
• /
• 2007

This study was conducted to select the most suitable fertilizer level on nursery of mat rush for good quality and high yield. $N-P_{2}O_{5}-K_{2}O=60-30-60$ (kg/10a), fertilizer level on nursery of mat rush showed relatively superior values for all yield components and quality with 57g in fresh weight, 12g in dry weight, 23% in air drying ratio for per plant at the nursery and 125cm in stem length, 150 numbers in stem number, 4,082kg/10a in fresh stem yield, 345kg/10a in long stem yield, 996kg/10a in medium stem yield, 1,421kg/l0a in total stem yield, 34% in dry stem ratio and 30% in long stem ratio at the main paddy field. The results indicate that fertilizer level, $N-P_{2}O_{5}-K_{2}O=60-30-60kg/10a$ in nursery shows different adaptabilities to a particular fertilizer level and 60-30-60 (kg/10a) seems to be the most suitable fertilizer level of mat rush for good quality and high yield.

• Journal of Korean Society of Forest Science
• /
• v.3 no.1
• /
• pp.23-27
• /
• 1963

A research was made through a experimental cultivation during a period of 7 years (1956~1962) to determine the yearly yield, the total gross yield over 7 year's period and the maximum availability of stock timbers used as the germination bed of cortinellus edodes (Berk) Ido et Imai. The results are summarized as follows : (1) Research and plot scheme: Two experimental plots were established-plot "A" in the experimental forest of this college; plot "B" in the campus woods, 400 timber beds were furnished in each. The kinds of timbers used are : Quercus Serrata Thumb 140. Quercus acutissima Carr. 140, Quercus crispula BI 120. The environmental condition in plot "A" was better then that in plot "B" and the former showed greater yield than the latter. (2) yield : In plot "A" the total yield was 58.875kg and some of the timbers was still continuing germ in this seven after closing of the plot. In plot "B" the total yield was 56.90kg and after the sixth year no more germination was observed. In conclusion, plot "A" showed greater yield and longer germination than plot "B". (3) Germination efficacy and the kinds of timber: The best result was abserved on Quercus serrata, thumb Quercur acutissima Carr, stood next and then came Quercus crispula BI. Betula platyphylla was tried, but the result was worst. (4) Availability limits of timber beds: Quercus serrata Thumb with diameter 12~15cm had the longest availability more than (6~7 years) and Quercus acutissima Carr with diameter 12~15cm showed 6~7 year's availability. The shortest availability was found in Quercus crispula with diameter 6~9cm. Any kinds of timber with diameter 6~9cm had only 4~5 years of availability (5) In the table showing the yearly germination quantity, the figure of December and Jaunary of the 4th and 5th year shows the yield obtained in the semi-cellar paper house. This tells that there is good promise of winter cultivation of cortinellus edodes (Berk) Ido et Imai on matured timber beds.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.12
• /
• pp.59-67
• /
• 1998

In this paper, a rigorous three-dimensional Monte Carlo approach to simulate the sputter yield as a function of the incident ion energy and the incident angle as well as the atomic ejection distribution of the target is presented. The sputter yield of the target atom (Cu, Al) has been calculated for the different species of the incident atoms with the incident energy range of 10 eV ~ 100 KeV, which coincides with the previously reported experimental results. According to the simulation results, the calculated sputter yield tends to increase with the amount of the energy of the incident atoms. Our simulation revealed that the maximum sputter yield can be obtained for the incident atom with 10 KeV for the heavy ion, while the maximum sputter yield for the light ion is for the incident atoms with an energy less than 1 KeV. The sputter yield increases with angle of incidence and seems to have the maximum value at 68$^{\circ}$. For angular distributions of the sputtered particle, the atoms in the direction normal to the surface increase with angle of incidence. Furthermore, we has conducted the parallel computation on CRAY T3E supercomputer and built a GUI(Graphic User Interface) system running the sputter simulator.

• Korean Journal of Soil Science and Fertilizer
• /
• v.51 no.2
• /
• pp.111-118
• /
• 2018

A field experiment was conducted to investigate the effect of long-term (21-year) fertilizer and compost treatments on the yield of red pepper and chemical properties in top-dong, Suwon. Six treatments were chosen for this work: No fertilization (No fert.), NPK fertilizers (NPK), NPK and compost (NPK+Compost), NP and compost (NP+Compost), NK and compost (NK+Compost), PK and compost (PK+Compost). The yield of red pepper for 21 years indicated the significant differences among the No fertilization, the PK+Compost, and other treatments. The relative yield index was 13% and 59% respectively, for the No fertilization and the PK+Compost if the average yield of red pepper for the NPK regards $20,048kg\;ha^{-1}$ as the yield index with 100%. Soil organic matter at the compost applied treatments significantly increased compared with the No fert. and the NPK. The average increase rates of soil organic matter by applying the compost ranged from 0.69 to $0.73g\;kg^{-1}\;yr^{-1}$. Available phosphate content in soil appeared the significant increase all treatments excluding the No fert. It is estimated that the available phosphate in soil was increased by $7.0mg\;kg^{-1}\;yr^{-1}$ by applying compost and $14.2mg\;kg^{-1}\;yr^{-1}$ by applying P fertilizer. Application of K fertilizer or the compost alone, the NPK, the NP+Compost, continuously caused soil K depletion whereas K fertilization plus the compost maintained at a constant level of exchangeable K. The results indicated that the addition of compost to NPK fertilizer is recommended for the maximum stable yield for red pepper and enhancement of organic matter though it is also needed for adjusting of P and K fertilization.

• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.408-417
• /
• 2016

Purpose: Yield monitoring systems are an essential component of precision agriculture. They indicate the spatial variability of crop yield in fields, and have become an important factor in modern harvesters. The objective of this paper was to review research trends related to yield monitoring sensors for grain crops. Methods: The literature was reviewed for research on the major sensing components of grain yield monitoring systems. These major components included grain flow sensors, moisture content sensors, and cutting width sensors. Sensors were classified by sensing principle and type, and their performance was also reviewed. Results: The main targeted harvesting grain crops were rice, wheat, corn, barley, and grain sorghum. Grain flow sensors were classified into mass flow and volume flow methods. Mass flow sensors were mounted primarily at the clean grain elevator head or under the grain tank, and volume flow sensors were mounted at the head or in the middle of the elevator. Mass flow methods used weighing, force impact, and radiometric approaches, some of which resulted in measurement error levels lower than 5% ($R^2=0.99$). Volume flow methods included paddle wheel type and optical type, and in the best cases produced error levels lower than 3%. Grain moisture content sensing was in many cases achieved using capacitive modules. In some cases, errors were lower than 1%. Cutting width was measured by ultrasonic distance sensors mounted at both sides of the header dividers, and the errors were in some cases lower than 5%. Conclusions: The design and fabrication of an integrated yield monitoring system for a target crop would be affected by the selection of a sensing approach, as well as the layout and mounting of the sensors. For accurate estimation of yield, signal processing and correction measures should be also implemented.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.295-303
• /
• 2006

The pulp yield was improved by about 4.5-5% when polysulfide (PS) and anthraquinone (AQ) were added to the kraft cooking liquor (white liquor). The exchange of the black liquor with fresh white liquor further increased the yield. The highest pulp yield was obtained when the PS cooking liquor containing 70% of total active alkali (AA) and 100% of AQ was used from the beginning of the reaction and the black liquor was exchanged with fresh white liquor containing the residual 30% of AA just after temperature reached $135^{\circ}C$. There was a good correlation between kraft pulp yields of a hardwood species and the ratios of the amount of xylose to glucose (X/G ratio), liberated by an acid hydrolysis of the pulps. However, the correlation was dependent on raw material wood species. Therefore, it is required in advance to establish a correlation between the yields and X/G ratios for raw material wood species of a target pulp in order to estimate pulp yield using X/G ratio. The X/G ratios of relatively high yield pulps showed higher values than those expected from the correlation. In a mill trial, the superiority of the PS-AQ isothermal cooking (ITC) process over the kraft ITC process was confirmed by examining X/G ratio of pulps obtained. The pulp yield in the PS-AQ ITC process was estimated at about 57.0%. This yield is very high, which indicates that reaction conditions of the PS-AQ ITC process are optimal.