• Korean Journal of Environmental Agriculture
• /
• v.6 no.2
• /
• pp.53-65
• /
• 1987

The study was performed to investigate the effect of gaseous emissions of sulfur dioxide and hydrogen fluoride on the growth of rice plants under stressed field conditions consisting of 88 industrial plants operating with 285 smoke stacks emitting pollutants. As for the relationship between yields and yield components it is believed that the panicles per hill is the single most important component affecting the rate of yield of the rice plant. Based on the standard partial regression coefficient analysis, panicles per hill has the largest contribution to yield and the average contribution of 54%. Other components such as spikelets per panicle, percent fertility and 1000 grain weight are also contributing factors to yield, although far less so. Fluorine content in the leaf appear to have more negative effect on panicles per hill, percent fertility and subsequent overall yield than does sulfur content in the leaf. It is constantly observed and interesting to note that fluorine and sulfur content in the leaf appears to have no effect on spikelets per panicle and 1000 grain weight. Reduction in yield seems to be affected mainly by panicles per hill which are, in turn, affected more by fluorine content in the leaf as demonstrated by the standard partial coefficient analysis. Regarding the prediction sum of the square of the regression equation, the lowest value was found when nine variables were used for the analysis. The variables taken into consideration were the monthly sulfur and fluorine content in the leaf as well as the monthly percent of leaf damage during the months of June, July and August. A significant correlation is found between the actual and predicted yields by the regression equations selected as a result of a prediction sum of the square analysis.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.3
• /
• pp.560-567
• /
• 2008

An efficient method to produce water-soluble polysaccharides from Lentinus lepideus is described. The productivity of both endopolysaccharides (PPS) and exopolysaccharides (EPS) was compared under various culture conditions. The effect of treating their own PPS and EPS on immune cytokine production was also studied in relation to culture factors. High yield production of EPS required a moderate culture temperature $(25^{\circ}C)$ as well as long culture period (16-20 days). In contrast, PPS production required a high culture temperature $(30^{\circ}C)$ and short culture period (8 days). Most of the carbon sources did not affect polysaccharides and mycelial production except for sucrose. Immune cytokine levels in the EPS treatment varied among carbon sources or culture periods. PPS did not appear to affect much on the production of cytokines, regardless of the culturing factors, except for the culture period. These results suggest that the optimal culture conditions for L. lepideus vary according to culture purposes, and different culture conditions should be used for different targets including mycelial biomass, EPS, and PPS. Whereas the immunomodulating activitiy of EPS appeared to be affected by culture conditions in L. lepideus, that of PPS did not.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.10
• /
• pp.1653-1659
• /
• 2015

Epothilone, which is produced by the myxobacterium Sorangium cellulosum, contributes significant value in medicinal development. However, under submerged culture conditions, S. cellulosum will accumulate to form bacterial clumps, which hinder nutrient and metabolite transportation. Therefore, the production of epothilone by liquid fermentation is limited. In this study, diatomite-based porous ceramics were made from diatomite, paraffin, and poremaking agent (saw dust). Appropriate methods to modify the porous ceramics were also identified. After optimizing the preparation and modification conditions, we determined the optimal prescription to prepare high-performance porous ceramics. The structure of porous ceramics can provide a solid surface area where S. cellulosum can grow and metabolize to prevent the formation of bacterial clumps. S. cellulosum cells that do not form clumps will change their erratic metabolic behavior under submerged culture conditions. As a result, the unstable production of epothilone by this strain can be changed in the fermentation process, and the purpose of increasing epothilone production can be achieved. After 8 days of fermentation under optimized conditions, the epothilone yield reached 90.2 mg/l, which was increased four times compared with the fermentation without porous ceramics.

• Food Science and Biotechnology
• /
• v.14 no.2
• /
• pp.190-195
• /
• 2005

The conditions for the extraction of effective substances from the stem of Opuntia ficus-indica were optimized by a response surface methodology. The total extract yield was maximized under the temperature of $97.77^{\circ}C$, at a time duration of 145.82 min and a water to sample ratio 16.59 mL/g. Moreover, the optimum conditions for the extraction of effective substances were as follows: $84.95^{\circ}C$, 156.50 min and a water/sample ratio of 7.46 mL/g for the phenolics content; and $97.11^{\circ}C$, 139.03 min and a water/sample ratio of 10.91 mL/g for the pectin content. The range of optimum extraction conditions in consideration of the physicochemical properties of the extracts were shown to be as $95-100^{\circ}C$ as the extraction temperature, 120-180 min as extraction time and a water to sample ratio of 5-18 mL/g.

• YAKHAK HOEJI
• /
• v.35 no.4
• /
• pp.319-325
• /
• 1991

Aluminum phosphate gel was synthesized by reacting aluminum sulfate as a soluble aluminum salt to tribasic sodium phosphate in this study. The optimal synthesis conditions based on the yield of product were investigated by applying Box-Wilson experimental design. It was found that optimal synthesis conditions were as follows: Reaction temperature; $61~71^{\circ}C$, concentration of two reactants; 12.27~13.83%, concentration ratio of two reactants; [AI$_{2}$(SO$_{4}$)$_{3}$]/[Na$_{3}$PO$_{4}$]= 0.5, reaction time; 10.9~12.1 minutes, drying temperature of product; $60~72^{\circ}C$. Aluminum phosphate gel prepared by the optimal synthesis conditions was suspended with four types of natural and synthetic gums at the concentration of 0.375~1.5wv%. Their Theological properties of aluminum phosphate gels were examined with Haake-Rotovisco RV 20 rotational viscometer. It showed that the higher concentration of suspending agents and lower temperature, the higher viscosity. Aluminum phosphate gel suspended by pectin and agar showed plastic flow with rheopexy, and their gels suspended by sodium alginate and sod. CMC showed plastic flow with thixotropy.

• The Korean Journal of Food And Nutrition
• /
• v.10 no.2
• /
• pp.241-245
• /
• 1997

In order to make natural food color from Gardenia, we investigated optimal conditions of color extraction, and thermal stability and light stability of color extracted compared with Yellow-4. In case of ethanol extraction, optimal conditions for color extraction were substrate 10%, 4$0^{\circ}C$, pH 7.0 and 42rs, respectively. In case of water extraction, optimal conditions for color extraction were substrate 10%, 7$0^{\circ}C$, pH 7.0 and 48hrs, respectively. Extraction yield in the optimal conditions was 75% in ethanol and 63% in water. The thermal stability and light stability of Yellow-4 were both upper 98%, but those of Gardenia yellow color were 62 and 90%, respectively.

• Journal of Ginseng Research
• /
• v.33 no.4
• /
• pp.337-342
• /
• 2009

The extraction conditions for the production of red ginseng polysaccharide were proposed. The crude fiber content of red ginseng marc (RGM) (15.3%) was much higher than that of white ginseng (WG) (2.1%) and red ginseng (RG) (0.5%). Thus, RGM was selected as the raw material for polysaccharide production. The correlation between the particle size of RGM and the polysaccharide extraction was investigated with a correlation analysis using the SPSS package. The two parameters were found to have a significant correlation (p<0.01). The polysaccharide extraction increased as the particle size of RGM decreased. The optimal concentration of RGM was 6.66% (w/v). The extraction yield increased as both the extraction temperature and the extraction time increased. Finally, the extraction temperature and time were selected as $85^{\circ}C$ and 5 hrs, respectively. Consequently, the extraction conditions for polysaccharide production were optimized and statistically confirmed.

• Geomechanics and Engineering
• /
• v.9 no.6
• /
• pp.729-742
• /
• 2015

The aim of the present work was the study of instability in a loose sand from Les Dunes beach in Ain Beninan, Algeria, where the Boumerdes earthquake occurred in 2003. This earthquake caused significant structural damages and claimed the lives of many people. Damages caused to infrastructures were strongly related to phenomena of liquefaction. The study was based on the results of two drained and six undrained triaxial tests over a local sand collected in a region where liquefaction occurred. All the tests hereby analyzed followed compression stress-paths in monotonic conditions and the specimens were isotropically consolidated, since the objective was to study the instability due to static loading as part of a more general project, which also included cyclic studies. The instability was modeled with the second-order work increment criterion. The definition of the instability line for Les Dunes sand and its relation with yield surfaces allowed the identification of the region of potential instability and helped in the evaluation of the susceptibility of soils to liquefy under undrained conditions and its modeling. The dilatancy rate was studied in the points where instability began. Some mixed tests were also simulated, starting with drained conditions and then changing to undrained conditions at different time steps.

• Transactions of Materials Processing
• /
• v.30 no.6
• /
• pp.284-290
• /
• 2021

Manufacturing using a 3D printer has recently increased in many fields and the material extrusion method, which is a lamination method, is commonly used. Since it uses a plastic material, the strength of the output of 3D printing is lower than that of steel material. For this reason, research on improving the mechanical properties of the output of 3D printing is continuously being conducted. In this study, tensile strength was compared with changes in the material type (PLA+, ABS) and density (60, 80, and 100%), layer height (0.1, 0.2, and 0.3 mm), layer direction (transverse and lengthwise), and fill pattern (zigzag, honeycomb, and concentric) among 3D printing output conditions. Tensile tests according to 3D printing output conditions were performed using a Universal Testing Machine. The results showed that tensile strength ranged from 21.10 MPa to 43.65 MPa according to the 3D printing output conditions.

• Journal of Applied Biological Chemistry
• /
• v.66
• /
• pp.81-89
• /
• 2023

The purpose of this study is to demonstrate the potential enhancement of the flavonoid contents from Agastache rugosa, which can be obtained as raw materials for functional products in the food medicine industry by identifying important factors for efficient preparation to save costs and time in terms of economic factors. For this reason, response surface methodology using Box-Behnken design was used to optimize the extraction conditions for the maximum yield of seven major compounds from A. rugosa. The optimum conditions were obtained with an ethanol concentration of 60.0%, a temperature of 50 ℃, and an extraction time of 33.6 min, meaning that the regression analysis fits the experimental data well. Under these conditions, the seven major compounds 1-7 had observed values of 2.169, 2.135, 0.697, 2.485, 0.105, 1.247, and 0.551%, respectively. These results show that the observed values are in good agreement with the predicted values in the regression model. This process for optimization study exhibited a basic protocol for obtaining stable ingredients from A. rugosa that are appropriate for the development of effective functional products.