• International Journal of Industrial Entomology and Biomaterials
• /
• v.18 no.1
• /
• pp.8-12
• /
• 2009

A study has been made to know the effect of a phytoecdysteroid 'Sampoorna' on uniform maturation of silkworms during spinning and its effect on diseased silkworms infected by major silkworm disease viruses, Bombyx mori nuclear polyhedrosis virus (BmNPV) and Bombyx mori infectious flacherie virus (BmIFV). In the present investigation, the effect of the phytoecdysteroid "Sampoorna" on Grasserie disease caused by BmNPV have shown an average cocoon melting of 11.91% with a disease incidence of 5.83%. The values of 't' test for different treatments of BmNPV indicated low survival rate and cocoon traits were drastically reduced. Another major disease Flacherie caused by BmIFV has shown considerable levels of larval disease incidence (22-32%) and cocoon melting (3-7.67%) with an average melting of 12.95% and 20.24% disease incidence. There is a drastic reduction in survival rate, cocoon yield and other economic traits. The control batches were indicated negligible values for disease incidence and cocoon melting with Sapoorna application and without the inoculation of the two disease-causing viruses. The application of Sampoorna on already infected batches with major pathogens triggered high mortality and disease incidence and melting percentage was also significantly increased with reduced economic traits. Hence, it is suggested that application of Sampoorna in infected batches should be done only in the extreme conditions of rearing. Application of Sampoorna on healthy batches led to uniform maturation and improvement in productivity with the added advantage of better quality cocoons and labour saving.

• YAKHAK HOEJI
• /
• v.50 no.3
• /
• pp.172-176
• /
• 2006

The purpose of this study is to develop a mass preparation method of (+)-decursinol from Angelica gigas roots. Recently; it has been shown that (+)-decursin, (+)-decursinol angelate and its analogues, isolated from Angelica gigas roots, exhibit various biological activities such as antitumor, antibacterial and neuroprotective activities. The contents of these compounds, ester form of (+)-decursinol, is very high in the Angelica gigas roots, whereas the content of (+)-decursinol itself is very low Therefore, (+)-decursinol which can be used as starting material to synthesize various its analogues was easily prepared from decursin analogues in the Angelica gigas roots. In order to achieve such aim, the Ether-Fr. of the ethanol exact of Angelica gigas roots was hydrolysed with various alkalis and solvents. As a result, the order of (+)-decursinol preparation was 1) NaOH, KOH, 2) $K_2CO_3$, and 3) $NaHCO_3$ as alkali. Also, the yield of (+)-decursinol was higher in diethyl ether than any other solvent conditions. From 1 kg of dried Angelica gigas roots, we could obtain 27.4 g of (+)-decursinol as a pure white solid.

• Resources Recycling
• /
• v.16 no.1 s.75
• /
• pp.59-67
• /
• 2007

Recovery of acids from the waste etching solution of containing acetic, nitric and hydrofluoric acid discharged from silicon wafer manufacturing process has been attempted by using solvent extraction method. EHA(2-Ethylhexlalcohol) for acetic acid and TBP(Tri-butly Phosphate) for nitric and hydrofluoric acid as a extraction agent was used to the experiment to obtain the process design data in separation procedure. From the experimental data and McCabe-Thiele diagram analysis, we obtained the optimum conditions of phase ratio(O/A) and stages to separate each acid sequently from the mixed acids. The recovery yield was obtained above 90% for acetic acid from the acid mixtures, 90% for nitric acid from acetic acid extraction raffinate and then above 67% for hydrofluoric acid from final extraction raffinate.

• Applied Biological Chemistry
• /
• v.35 no.3
• /
• pp.173-178
• /
• 1992

A bacterium having CMCase activity was isolated form soil and identifed as a Pseudomonas sp YD-15. The optimum conditions for the production of CMCase were avicel 1.2%, yeast extract 0.5%, $KNO_3$ 0.06%, $K_2HPO_4$ 0.2%, $MgSO_4$ $7H_2O$ 0.15%, pH 8.0, $30^{\circ}C$ and 60 hours cultivation. The CMCase was purified 15.2 folds with 14ft yield through ammonium sulfate precipitation, DEAE-sepharose column chromatography and sephadex G-100 gel filtration chromatography. The optimum pH and temperature for the enzyme activity were 6.0 and $50^{\circ}C$, respectively. The enzyme was stable between pH 5.0 and 8.0, below $50^{\circ}C$. The molecular weight was calculated about 100,000 by SDS-polyacrylamide gel electrophoresis. $K_m$ value for CMC used as a substrate was 40 mg/ml.

• Journal of the Korean Ceramic Society
• /
• v.41 no.9
• /
• pp.684-689
• /
• 2004

Hexagonal sheet typed $\alpha$-Al$_2$O$_3$ nano particles were synthesized successfully at various conditions with the aluminum sulfate solution extracted from kaolin through the conventional and microwave assisted polyacrylamide (PAA) gel methods. Shorter gel time and higher yield were obtained in the microwave assisted PAA gel method, compared to conventional method. the size of nano particles was not changed by increasing the concentration of aluminum sulfate, but decreased with increasing the concentration of cross-linking agent in both the conventional and microwave samples. Above 0.01M concentration of cross-linking agent, the sizes of nano particles in the microwave samples were relatively larger than those in the conventional samples.

• Journal of Environmental Science International
• /
• v.2 no.4
• /
• pp.311-316
• /
• 1993

Methane production from grain dust was studied using a 3 L laboratory-scale anaerobic plug flow digester. The digester was operated at; temperature of 35, 45, and 55$^{\circ}C$; hydraulic retention time(HRT) of 6 and 12 days; and influent concentration($S_o$) of 7.8 and 9.0 % total solids(%TS). With ten different operation conditions, this study showed the significant effects of temperature, hydraulic retention time, and influent concentration on methane production. The highest methane-production rate achieved was 1.903 (L methane) /(L digester)(day) at 55$^{\circ}C$, 6 days HRT, and $S_0$ of 7.8 %TS. A total of 3.767 L of biogas per day with a methane content of 50.57 % was obtained from this condition. The ultimate methane yield($B_0$) was found to be a function of temperature and influent concentration, and was described as : $B_0$ = 0.02907T-0.1263-0.00297(T-10)(%TS), where TS is the total solids in the liquid effluent, and T is temperature($^{\circ}C$). Our results showed that thermophilic condition is better than mesophilic for grain dust stabilization in an anaerobic plug flow digester.

• Imaging Science in Dentistry
• /
• v.50 no.1
• /
• pp.23-30
• /
• 2020

Purpose: This study was conducted to assess the effectiveness of a metal artifact reduction (MAR) algorithm activated at different times during cone-beam computed tomography (CBCT) acquisition on the magnitude of artifacts generated by a zirconium implant. Materials and Methods: Volumes were obtained with and without a zirconium implant in a human mandible, using the OP300 Maxio unit. Three modes were tested: without MAR, with MAR activated after acquisition, and with MAR activated before acquisition. Artifacts were assessed in terms of the standard deviation (SD) of gray values and the contrast-to-noise ratio (CNR) in 6 regions of interest with different distances (10 to 35 mm, from the nearest to the farthest) and angulations(70° to 135°) from the implant region. Results: In the acquisitions without MAR, the regions closer to the implant(10 and 15mm) had a higher SD and lower CNR than the farther regions. When MAR was activated (before or after), SD values did not differ among the regions (P>0.05). The region closest to the implant presented a significantly lower CNR in the acquisitions without MAR than when MAR was activated after the acquisition; however, activating MAR before the acquisition did not yield significant differences from either of the other conditions. Conclusion: Both modes of MAR activation were effective in decreasing the magnitude of CBCT artifacts, especially when the effects of the artifacts were more noticeable.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.2
• /
• pp.260-267
• /
• 2015

The effect of different tumbling marination treatments (control group, CG; conventional static marination, SM; vacuum continuous tumbling marination, CT; vacuum intermittent tumbling marination, IT) on the quality characteristics of prepared pork chops was investigated under simulated commercial conditions. The CT treatment increased (p<0.05) the pH value, $b^*$ value, product yield, tenderness, overall flavor, sensory juiciness and overall acceptability in comparison to other treatments for prepared boneless pork chops. The CT treatment decreased (p<0.05) cooking loss, shear force value, hardness, gumminess and chewiness compared with other treatments. In addition, CT treatment effectively improved springiness and sensory color more than other treatments. However, IT treatment achieved the numerically highest (p<0.05) $L^*$ and $a^*$ values. These results suggested that CT treatment obtained the best quality characteristics of prepared pork chops and should be adopted as the optimal commercial processing method for this prepared boneless pork chops.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.2
• /
• pp.33-40
• /
• 2008

Streaming video has become a popular form of transferring media over the wired/wireless network. TCP-friendly rate control (TFRC) is used as a streaming media transport protocol. Using the TCP congestion response function and current network conditions, TFRC adjusts its sending rate to yield the maximum TCP-friendly throughput. Since TFRC was designed for applications that would prefer to maintain a slowly-changing sending rate, it is less responsive to changes in handover between wireless heterogeneous networks such as 3G network, WLAN, and so on. This paper shows a new TFRC method for vertical handover over wireless heterogeneous network. The proposed TFRC method has features of low quality interruption and fast rate adaptation to a new target network. The simulation results show that the proposed one provides better QoS and throughput support than the traditional TFRC scheme during vertical handover.

• KSBB Journal
• /
• v.11 no.2
• /
• pp.132-139
• /
• 1996

The growth of recombinant E. coil and by-product production were investigated. D-cycloserine was added to increase the secretion of ${\alpha}$-amylase from recombinant E.coil. Even though cell growth was increased for optimal d-cycloserine concentration $0.1g/\ell$, extracellular ${\alpha}$-amylase activity remained almost the same as the case without d-cycloserine. It is important to achieve the high cell density for commercial production of methaboliles including ${\alpha}$-amylase. To achieve this goal, culture conditions should be selected carefully and optimized considering cell growth and by-products production. In cultivating retombinant E. coli, lactic acid and acetic acid turned out to be important by-product which affected cell yield and growth rate.