• Journal of the Korean Solar Energy Society
• /
• v.33 no.5
• /
• pp.18-23
• /
• 2013

This paper presents a simple but valid loss calculation method of grid-connected photovoltaic system based on normalized yield model. The proposed method can be represented as a quantitative value for five losses and performance of grid-connected photovoltaic system with three years monitored data. These results will indicate that it is useful to investigate various loss factors causing the performance obstruction, enhance the lifetime yield for changing meteorological conditions, and determine the optimal design and performance improvement of grid-connected photovoltaic system.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.11
• /
• pp.1575-1578
• /
• 2003

An environmentally benign approach for the synthesis of 2-substituted-4,6-diaryl pyrimidines using inorganic solid supports for its catalytic role as well as an energy transfer medium is described. The methodology eliminates the usage of solvent during the reaction. The reaction time is brought down from hours to minutes along with yield enhancement. The rate enhancement and high yield is attributed to the coupling of solvent free conditions with microwaves. Further, the role of base is studied in the reaction and it is concluded that microwave assisted basic alumina catalysed reaction is the best in terms of catalysis as well as reaction time and yield.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.35 no.2
• /
• pp.73-80
• /
• 1993

A simplified physiologically-based dynamic model, SIMRIW was selected for predicting the growth and yield of rice. The applicability of the model to the rice cultivars and weather conditions in the Republic of Korea was evaluated. Parameters of the model were calibrated using actual rice yields in Suweon region and an optimization scheme, Constrained Rosenbrock Algorithm. The simulated results from the calibrated model were in good agreement with the field data. The model with parameters calibrated for Suweon was applied to other five regions for the evaluation of transferability, but the simulated results fell short of satisfaction. However, the model is found to be applied to real-time prediction of the growth and yield of rice crop, which is believed to be useful for timely rice crop management, agricultural policy making, and optimal irrigation water management.

• Tribology and Lubricants
• /
• v.16 no.5
• /
• pp.341-350
• /
• 2000

The study reported in this paper deals with the development for parametric investigation of the influence of the rheological properties of the lubricant in the thermohydrodynamic (THD) film conditions which occur in slider and journal bearings. A parametric investigation based on a Bingham model with a shear yield stress which best fit the experimental pressure is performed for predicting the thickness of the shear Bone in lubricating films with fixed geometry between the stationary and moving surfaces. The results suggest that the shear yield stress for the lubricating film is proportional to the pressure developed in the film within the range of the investigated cases and the shear zone thickness which is of the same order of magnitude as that obtained by the empirical formula is significantly smaller than the fluid film thickness in the lubrication zone.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.2
• /
• pp.153-158
• /
• 1996

The synthesis of common skeleton of podosporin A and aureol was studied through cationic olefin cyclization as a key step. The generation of thermodynamic silyl enol ether or enol acetate under known conditions gave regioselectivity of 88:12. The enolate alkylation of 2,3-dimethylcyclohexanone with 2,5-dimethoxybenzyl bromide at the more substituted site via lithium enolate gave poor yield. In this case an organozincate or an ammonium enolate also proved to be ineffective or not practical in terms of yield. Side chain elongation of the substituted cyclohexanone 13 through Grignard reaction, Wittig reaction, or Shappiro reaction did not proceed because of steric hindrance and side reactions. However, Stille coupling reaction via enol triflate produced the desired product 18 in high yield. The advanced intermediate 22, which was efficiently synthesized from 18, produced 24 instead of the desired product under a cationic olefin cyclization condition, indicating that the cyclization occurred in a stepwise mannervia the organomercury intermediate 23.

• Journal of Powder Materials
• /
• v.30 no.1
• /
• pp.29-34
• /
• 2023

A fixed-point iteration is proposed to integrate the stress and state variables in the incremental analysis of plastic deformation. The Conventional Newton-Raphson method requires a second-order derivative of the yield function to generate a complicated code, and the convergence cannot be guaranteed beforehand. The proposed fixed-point iteration does not require a second-order derivative of the yield function, and convergence is ensured for a given strain increment. The fixed-point iteration is easier to implement, and the computational time is shortened compared with the Newton-Raphson method. The plane-stress condition is considered for the biaxial loading conditions to confirm the convergence of the fixed-point iteration. 3-dimensional tensile specimen is considered to compare the computational times in the ABAQUS/explicit finite element analysis.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.4
• /
• pp.276-284
• /
• 2023

Nitrogen is a major and essential macronutrient for plant growth and development. However, excessive nitrogen application can lead to ecological pollution or greenhouse gas emissions, consequently resulting in climate change. In this study, we used 153 genetic resources of rice to evaluate the effects of the levels of nitrogen application on grain yield and yield-related traits. Significant differences were noted in the yield and yield-related traits of genetic resources between two nitrogen application levels, namely, 4.5 kg/10a (NN: normal nitrogen condition) and 9.0 kg/10a (LN: low-nitrogen condition). Among the tested traits, days to heading (DTH), clum length (CL), grain yield per plant (GYP), number of panicles per plant (NPP), and number of spikelets per panicle (NSP) decreased by 1.8 to 17.9% when the nitrogen application levels decreased from NN to LN. The 1,000-grain weight (TWG) and percentage of ripened grain (PRG) increased by 2.6 to 11.2% under these conditions. Based on nitrogen application levels, two-way analysis of variance (ANOVA) demonstrated significant differences in GYP, NPP, and PRG but not in NSP and TGW. NPP exhibited negative correlations with NSP (-0.44) and TGW (-0.44), and TGW displayed a negative correlation with PRG (-0.34), whereas, GYP exhibited a positive correlation with PRG (0.37) and NSP (0.38). A similar pattern was recorded under the LN condition. NPP, TGW, and PRG were clustered as PA (principle axis) 1 under the LN condition by factor analysis. NSP and GYP were clustered as PA (principle axis) 2. These results demonstrated NPP and NSP as the primary factors contributing to the decrease in grain yield under LN conditions. In conclusion, we selected eight genetic resources that exhibited higher GYP under both NN and LN conditions with higher NPP or NSP. These genetic resources can be considered valuable breeding materials for the adaptation of plants to nitrogen deficiency.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.4
• /
• pp.339-345
• /
• 2020

Recently, abnormal weather conditions, such as extreme high temperatures and droughts, have increased in frequency due to climate change, there has accordingly been growing concern regarding the detrimental effects on field crop, including soybean. Therefore, this study was conducted to examine the effects of increased temperatures on soybean growth and yield using a temperature gradient chamber (TGC). Two major types of soybean cultivar, a medium- seed cultivar such as Daepung-2 and a large-seed cultivar such as Daechan, were used and four temperature treatments, aT+1℃ (ambient temperature+1℃), aT+2℃ (ambient temperature+2℃), aT+3℃ (ambient temperature+3℃) and aT+4℃ (ambient temperature+4℃) were established to examine the growth response and seed yield of each cultivar. Seed yield showed a higher correlation with seed weight (r=0.713***) and an increase in temperature affected seed yield by reducing the single seed weight. In particular, the seed growth rate of the large-seed cultivar (Daechan) increased at high temperature, resulting in a reduction in the number of days for full maturity. Our results accordingly indicate that large-seed cultivar, such as Daechan, is potentially vulnerable to high temperature stress. The results of this study can be used as basic data in the development of cultivation technology to reduce the damage caused by elevated temperatures. Also, further research is required to evaluate the response of each process contributing to seed yield production under high temperatures.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.13 no.1 s.29
• /
• pp.89-97
• /
• 1989

Graft polymerization of MMA onto cotton fiber was carried out in two ways, two step graft polymerization and one step emulsion graft polymerization, using tetravalent cerium ion as an initiator. At two step graft polymerization, the first step was the pretreatment of cotton fiber with an aqueous initiator solution and the second was the grafting pretreated cotton fiber in the monomer solution. In case of one step emulsion graft polymerization, MMA was emulsified with SLS in initiator solution. Under the various graft polymerization conditions, graft yield, graft efficiency and from the Arrhenius plot the apparent activation energy were compared. The results of this study were as follows: 1. Graft yield and graft efficiency of emulsion graft polymerization were higher than those of two step graft polymerization. 2. In case of two step graft polymerization, graft yield was affected by the pretreatment time of cotton fiber with an aqueous initiator solution. And graft yield of emulsion graft polymerization was increased with the concentration of emulsifier below cmc of SLS and was decreased thereafter. 3. Elevation of temperature resulted increase in graft yield for both grafting methods. The apparent activation energy of emulsion graft pelymerzation was lower than that of two step graft polymerization. 4. Increased reaction time increased in graft yield, but decreased in graft efficiency. 5. Moisture regain of grafted cotton was decreased with graft yield.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.5
• /
• pp.374-378
• /
• 2004

The effects of various environmental factors such as pH (5, 6, 7, 8 and 9), temperature (30, 37 and $40^{\circ}C$) and rotational speed (150, 200 and 250 rpm) on the growth and the hepatitis B core antigen (HBcAg) production of Escherichia coli W3110IQ were examined in the present Study. The highest growth rate is achieved at pH 7, $37^{\circ}C$ and at a rotational Speed of 250 rpm which is 0.927 $h^{-1}$. The effect of pH on cell growth is more substantial compared to other parameters; it recorded a $123\%$ different between the highest growth rate (0.927 $h^{-1}$) at pH 7 and lowest growth at pH 5. The highest protein yield is achieved at pH 9, rotational speed of 250 rpm and $40^{\circ}C$. The yield of protein at pH 7 is $154\%$ higher compared to the lowest yield achieved at pH 5. There is about $28\%$ different of the protein yield for the E. coli cultivated at 250 rpm compared to that at 150 rpm which has the lowest HBcAg yield. The yield of protein at $40^{\circ}C$ is $38\%$ higher compared to the lowest yield achieved at $30^{\circ}C$.