• 제목/요약/키워드: xH2O]

검색결과 2,716건 처리시간 0.03초

Diffusion Behaviors and Electrical Properties in the In-Ga-Zn-O Thin Film Deposited by Radio-frequency Reactive Magnetron Sputtering

  • Lee, Seok Ryeol;Choi, Jae Ha;Lee, Ho Seong
    • 한국표면공학회지
    • /
    • 제48권6호
    • /
    • pp.322-328
    • /
    • 2015
  • We investigated the diffusion behaviors, electrical properties, microstructures, and composition of In-Ga-Zn-O (IGZO) oxide thin films deposited by radio frequency reactive magnetron sputtering with increasing annealing temperatures. The samples were deposited at room temperature and then annealed at 300, 400, 500, 600 and $700^{\circ}C$ in air ambient for 2 h. According to the results of time-of-flight secondary ion mass spectrometry and X-ray photoelectron spectroscopy, no diffusion of In, Ga, and Zn components were observed at 300, 400, 500, $600^{\circ}C$, but there was a diffusion at $700^{\circ}C$. However, for the sample annealed at $700^{\circ}C$, considerable diffusion occurred. Especially, the concentration of In and Ga components were similar at the IGZO thin film but were decreased near the interface between the IGZO and glass substrate, while the concentration of Zn was decreased at the IGZO thin film and some Zn were partially diffused into the glass substrate. The high-resolution transmission electron microscopy results showed that a phase change at the interface between IGZO film and glass substrate began to occur at $500^{\circ}C$ and an unidentified crystalline phase was observed at the interface between IGZO film and glass substrate due to a rapid change in composition of In, Ga and Zn at $700^{\circ}C$. The best values of electron mobility of $15.5cm^2/V{\cdot}s$ and resistivity of $0.21{\Omega}cm$ were obtained from the sample annealed at $600^{\circ}C$.

Effect of citrate coated silver nanoparticles on biofilm degradation in drinking water PVC pipelines

  • Nookala, Supraja;Tollamadugu, Naga Venkata Krishna Vara Prasad;Thimmavajjula, Giridhara Krishna;Ernest, David
    • Advances in nano research
    • /
    • 제3권2호
    • /
    • pp.97-109
    • /
    • 2015
  • Citrate ion is a commonly used reductant in metal colloid synthesis, undergoes strong surface interaction with silver nanocrystallites. The slow crystal growth observed as a result of the interaction between the silver surface and the citrate ion makes this reduction process unique compared to other chemical and radiolytic synthetic methods. The antimicrobial effects of silver (Ag) ion or salts are well known, but the effects of citrate coated Ag nanoparticles (CAgNPs) are scant. Herein, we have isolated biofilm causative bacteria and fungi from drinking water PVC pipe lines. Stable CAgNPs were prepared and the formation of CAgNPs was confirmed by UV-visible spectroscopic analysis and recorded the localized surface plasmon resonance of CAgNPs at 430 nm. Fourier transform infrared spectroscopic analysis revealed C=O and O-H bending vibrations due to organic capping of silver responsible for the reduction and stabilization of the CAgNPs. X-ray diffraction micrograph indicated the face centered cubic structure of the formed CAgNPs, and morphological studies including size (average size 50 nm) were carried out using transmission electron microscopy. The hydrodynamic diameter (60.7 nm) and zeta potential (-27.6 mV) were measured using the dynamic light scattering technique. The antimicrobial activity of CAgNPs was evaluated (in vitro) against the isolated fungi, Gram-negative and Gram-positive bacteria using disc diffusion method and results revealed that CAgNPs with 170ppm concentration are having significant antimicrobial effects against an array of microbes tested.

석탄계 핏치를 결합재로한 탄소/탄소 복합재의 제조 및 특징 (Fabrication and Characteristics of CFRC(Carbon Firber Reinforced Carbon Composites) Fabricated with Carbon Fiber and Coal Tar Pitch Matrix)

  • 주혁종;최돈묵;오인석
    • 한국재료학회지
    • /
    • 제4권2호
    • /
    • pp.194-205
    • /
    • 1994
  • 본 연구에서는 원료 석탄 핏치와 흑연화성이 우수한 THF 가용성분만을 추출한 핏치 결합재에 8H/Satin woven fabric 프리프레그 및 고탄성 및 고강도계 연속 탄소섬유 등을 보강하여 가압열성형법으로 green body 를 제조한 다음 탄화, 함침, 재탄화 및 흑연화 공정을 거쳐 열적 미 기계적물성이 우수한 CFRC를 제조하였으며, 주사전자현미경, 편광현미경, X선회절분석,열중량분석, 굴곡강도, 굴곡탄성률, 충간전단강도 등을 시험하였다. THFSP결합재를 $2300^{\circ}C$까지 열처리 한 다음 X선회절분석을 한 결과, 결정성이 가장 우수하여 (002) 면에서 $C_0$/2인 값이 3.380$\AA$였으며, 2$\theta$값도 $26.276^{\circ}$로 천연흑연의 Bragg angle에 거의 접근하였으며 공기산화 반응특성을 시험하기 위하여 등온 열중량분석을 한 결과 $2300^{\circ}C$까지 흑연화 한 THFSP결합재가 산화에 대하여 가장 우수한 저항성을 나타내었다. 섬유용적률이 증가됨에 따라 65~70%까지는 기계적 물성이 중가하는 경향을 보였지만 그이상 섬유가 보강된 CFRC는 결합재의 부족으로 인하여 오히려 기계적 물성이 감소하였다. 또한 굴곡강도 시험후 주사전자현미경으로 파괴 단면을 관찰한 결과 THFSP결합재가 흑연화성이 우수하여 파괴시 결합재가 외력에 대한 흡수가 양호하여 보강재의 파괴를 억제했기 때문에 기계적 물성도 우수하게 나타났다.

  • PDF

랜덤 PP의 반응압출 및 PP/Pulp 복합체 특성에 대한 스티렌과 무수말레인산 함량의 영향 (Effect of Styrene and Maleic Anhydride Content on Properties of PP/Pulp Composites and Reactive Extrusion of Random PP)

  • 이종원;김지현;김연철
    • 공업화학
    • /
    • 제25권3호
    • /
    • pp.318-323
    • /
    • 2014
  • 랜덤 폴리프로필렌(random polypropylene, rPP)의 무수말레인산(maleic anhydride, MAH) 반응압출에 대한 MAH 함량 및 스티렌/MAH 몰비의 영향을 고찰하기 위해 이축압출기(twin screw extruder)를 이용하여 MAH가 그라프트된 rPP(MAH-g-rPP)를 제조하였다. MAH의 함량은 0.5, 1.0, 3.0, 5.0 phr이었고, 스티렌/MAH 몰비는 0, 1, 2로 하였으며, 개시제로는 dicumyl peroxide (DCP)가 사용되었다. MAH의 그라프트 정도는 FT-IR을 이용하여 $1700cm^{-1}$ 근처에서 나타나는 카르보닐기(C = O) 신축진동 피크의 존재 여부를 통해 확인하였으며, $3000cm^{-1}$ 근처의 C-H 신축진동을 기준으로 하여 정량한 결과 그라프트 반응이 MAH 함량이 3.0 phr까지 증가하는 경향을 보여주었고, 스티렌 몰비는 1.0일 때 최적을 나타내었다. MAH-g-rPP와 MAH-g-rPP가 5.0 phr 포함된 PP/MAH-g-rPP/pulp 복합체의 열적특성, 결정화 특성 등을 시차주사열용량분석기(DSC), 열중량분석기(TGA), X-선 회절분석(XRD), 편광현미경(POM) 등을 이용하여 관찰하였다. 비등온 결정화온도는 rPP-g-MAH가 첨가되었을 때 감소하는 경향을 나타내었고, PP/MAH-g-rPP/pulp 복합체의 인장특성과 인장시험 후 파단면의 SEM을 측정한 결과, MAH 함량 1.0 wt%, 스티렌/MAH 몰비 1.0일 때 상용화제로의 역할이 가장 우수한 것으로 나타났다. 복합체의 가공성 비교를 위해 복소 점도와 전단박하(shear thinning) 정도를 동적유변측정기를 이용하여 측정하였다. 상용화제를 가지는 복합체의 경우 낮은 멱수 법칙 지수(n)를 보여주었다.

선천성심질환(先天性心疾患)의 심폐기(心肺器) 개심수술(開心手術) - 4례(例) 보고(報告) - (Open Heart Surgery of Congenital Heart Diseases -Report of Four Cases-)

  • 김근호;박영관;지행옥;김영태;이종배;정윤채;오철수
    • Journal of Chest Surgery
    • /
    • 제9권1호
    • /
    • pp.1-9
    • /
    • 1976
  • The present. study reports four cases of congenital heart diseases, who received open heart surgery by the Sarn's Heart-Lung-Machine in the department of Thoracic Surgery, Hanyang University Hospital during the period between July 1975 and May 1976. The Heart-Lung-Machine consisted of the Sarn's five head roller pump motor system (model 5000), heat exchanger, bubble trap, the Rygg-Kyvsgaard oxygenator, and monitors. The priming of pump oxygenator was carried out by the hemodilution method using Hartman's solution and whole blood. Of the four cases of the heart diseases, three whose body weight were below 30kg, received the partial hemodilution priming and the remaining one whose body weight was 52kg received the total hemodilution priming with Hartman's solution alone. The rate of hemodilution was in the average of 60.5ml/kg. Extracorporeal circulation was performed at the perfusion flow rate of the average 94.0ml/kg/min, and at the moderate hypothermia between 35'5"C and 30'5"C of the rectal temperature. In the total cardiopulmonary bypass, arterial blood pressure was anged between 30 mmHg and 85 mmHg, generally maintaining over 60 mmHg and venous pressure was measured between 4 and $23cmH_2O$, generally maintaining below $10cmH_2O$. The first case: The patient, a nine year old girl having the symptoms and physical signs typical to cardiac anomaly was definitely diagnosed as isolated pulmonary stenosis through the cardiac catheterization. There was, however, no cyanosis, no pathological finding by X-ray and E.C.G. tracings. The valvulotomy was performed through the arteriotomy of pulmouary artery under the total cardiopulmonary bypass. Postoperative course of the patient was uneventful, and murmur and the clinical symptoms disappeared. The second case: A 12 year old boy with congenital heart anomaly was positively identified as having ventricular septal defect through the cardiac catheterization. As in the case with the first case, the patient exhibited the symptoms and physical signs typical to cardiac anomaly, but no pathological abnormality by X-ray and E.C.G. tracings. The septal defect was localized on atrioventricular canal and was 2 by 10 mm in size. The septal defect was closed by direct simple sutures under the cardiopulmonary bypass. Postoperative hemodynamic study revealed that the pressure of the right ventricle and pulmonary artery were decreased satisfactory. Postoperative course of the patient was uneventful, and murmur and the clinical symptoms disappeared. The third case: The patient, a 19 year old girl had been experienced the clinical symptoms typical to cardiac anomaly for 16 years. The pink tetralogy of Fallot was definitey diagnosed through the cardiac catheterization. The patient was placed on an ablolute bed rest prior to the operation because of severe exertional dyspnea, fatigability, and frequent syncopal attacks. However, she exhibited very slight cyanosis. Positive findings were noted on E.C.G. tracings and blood picture, but no evidence of pathological abnormality on X-ray was observed. All of the four surgical approaches such as Teflon patch closure (3 by 4cm in size) of ventricular septal defect, myocardial resection of right ventricular outflow tract, valvulotomy of pulmonary valvular stenosis, and pericardial patch closing of ventriculotomy wound were performed in 95 minutes under the cardiopulmonary bypass. Postoperative hemodynamic study revealed that the pressure of the right ventricle was decreased and pulmonary artery was increased satisfactorily. Postoperative course of the patient was uneventful, and murmur and the clinical symptoms disappeared. The fourth case: The patient, a 7 1/4 year old girl had the symptoms of cardiac anomaly for only three years prior to the operation. She was positively identified as having acyanotic tetralogy of Fallot by open heart surgery. The patient showed positive findings by X-ray and E.C.G. tracings, but exhibited no cyanosis and normal blood picture. All of the three surgical approaches, such a myocardial resection of hypertrophic sight ventricular outflow tract, direct suture closing of ventricular septal defect and pericardial patch closing of ventriculotomy wound were carried out in 110 minutes under the cardiopulmonary bypass. Postoperative hemodynamic study revealed that the pressure of the right ventricle was decreased and pulmonary artery was increased satisfactorily. Postoperative course of the patient was uneventful, and the symptoms disappeared.

  • PDF

공침법을 이용한 마그네슘이 첨가된 biphasic calcium phosphate의 적합성 평가 (Suitability evaluation of magnesium substituted biphasic calcium phosphates prepared by coprecipitation method)

  • 이형신;김태완;김동현;박홍채;윤석영
    • 한국결정성장학회지
    • /
    • 제20권5호
    • /
    • pp.237-242
    • /
    • 2010
  • Mg-BCP(Mg Substituted BCP)를 제조하기 위하여 $Ca(NO_3)_2{\cdot}4H_2O$(Katayama chemical, Japan)과 $(NH_4)_2{\cdot}HPO_4$ (Junsei chemical, Japan), $Mg(NO_3)_2{\cdot}6H_2O$(Junsei chemical, Japan)를 출발물질로 공침법(co-precipitation process)을 이용하여 합성하였다. 제조된 분말의 마그네슘의 첨가에 따른 분말의 분광학적 특성은 FT-IR(MAGNA-IR 560, Nicolet)을 통하여 분석하였으며, SEM(S-4200, Hitachi)을 통하여 미세구조를 분석하였다. XRD 회절피크의 면적적분강도를 Integral Analysis (Rigaku, Japan)를 이용하여 HAp와 ${\beta}$-TCP의 비율을 확인하였다. 1.0 wt% 마그네슘이 첨가된 BCP 샘플의 경우 Hank's solution에서의 2주 침적 후 표면에 침상의 HAp로 추정되는 결정이 성장하였다. 이러한 미세구조의 변화는 생활성을 가지는 마그네슘의 첨가가 BCP 조직 내에서 표면의 활성을 증가시켜 결정의 성장을 촉진시킨 것으로 판단된다.

천연 스틸바이트의 압력전달매개체에 따른 선형압축률 및 체적탄성률 비교 연구 (Changes in the Linear Compressibility and Bulk Modulus of Natural Stilbite Under Pressure with Varying Pressure-Transmitting Media)

  • 황희정;이현승;이수진;정재우;이용문
    • 광물과 암석
    • /
    • 제35권3호
    • /
    • pp.367-376
    • /
    • 2022
  • 본 연구는 섭입대 환경에서 다양한 액체들과 제올라이트와의 반응을 이해하기 위한 선행단계로, 섭입대 내 대표 제올라이트 중 하나인 스틸바이트(NaCa4(Al9Si27)O72·28(H2O))의 압축거동을 관찰하였다. 물과 NaHCO3 용액을 매개체로 사용하였으며, 상압에서 최대 2.5 GPa까지 가압하였다. 1.0 GPa 이하에서는 두 실험 모두 0.001~0.004 GPa-1 범위의 낮은 선형압축률과 220(1) GPa의 높은 체적탄성률을 보였다. 이는 물분자 또는 양이온이 스틸바이트의 채널 내부로 유입되면서 구조가 매우 치밀해졌기 때문으로 추측된다. 반면, 1.0 GPa 이상에서는 두 실험의 경향이 다르게 관찰되었다. 물의 실험에서는 c축, NaHCO3의 실험에서는 b, c축의 선형압축률이 모두 0.006(1) GPa-1으로 급격하게 증가하였다. 체적탄성률은 물과 NaHCO3의 실험에서 각각 40(1), 52(7) GPa의 값을 보여, 1.0 GPa 이전과 비교했을 때 압축률이 4배 이상 높아졌다. 이는 1.0 GPa 이상의 압력에서 압력매개체 내 물이 얼기 시작하면서 스틸바이트 내부로 유입이 멈추었고, 단지 채널 내에서 양이온 및 물분자가 이동함에 따라서 생기는 현상으로 판단된다. 특히 NaHCO3의 실험에서는 소듐 양이온이 치환됨에 따라 구조 내부의 분포가 달라졌을 것으로 추측되며, 이는 (001)과 (020)피크의 상대강도 비율이 물의 실험과 다른 경향으로 나타난 것을 근거로 예상해볼 수 있다.

비차폐 환경에서의 고온초전도 SQUID 2차 미분기의 특성연구 (High-$T_c$ 2nd-order SQUID Gradiometer for Use in Unshielded Environments)

  • 박승문;강찬석;이순걸;유권규;김인선;박용기
    • Progress in Superconductivity
    • /
    • 제5권1호
    • /
    • pp.50-54
    • /
    • 2003
  • We have fabricated $∂^2$$B_{z}$ /$∂x^2$ type planar gradiometers and studied their properties in operation under various field conditions. $YBa_2$$Cu_3$$O_{7}$ film was deposited on $SrTiO_3$ (100) substrate by a pulsed laser deposition (PLD) system and patterned into a device by the photolithography with ion milling technique. The device consists of 3 pickup loops designed symmetrically Inner dimension and the width of the square side loops are 3.6 mm and 1.2 mm, respectively, and the corresponding dimensions of the center loop are 2.0 mm and 1.13 mm. The length of baseline gradiometer is 5.8 mm. Step-edge junction width is 3.0 $\mu\textrm{m}$ and the hole size of the SQUID loop is 3 $\mu\textrm{m}$ ${\times}$ 52 $\mu\textrm{m}$. The SQUID inductance is estimated to be 35 pH. The device was formed on a 20 mm ${\times}$ 10 mm substrate. We have tested the behavior of the device in various field conditions. The unshielded gradiometer was stable under extremely hostile conditions on a laboratory bench. Noise level 0.45 pT/$\textrm{cm}^2$/(equation omitted)Hz and 0.84 pT/$\textrm{cm}^2$/(equation omitted)Hz at 1 Hz for the shielded and the unshielded cases, which correspond to equivalent field noises of 150 fT/(equation omitted)Hz and 280 fT/(equation omitted)Hz, respectively. In spite of the short baseline of 5.8 mm, the high common-mode-rejection-ratio of the gradiometer, $10^3$, allowed us to successfully record magnetocardiogram of a human subject, which demonstrates the feasibility of the design in biomagnetic studies.

  • PDF

ZrN 및 TiN 코팅된 치과교정 용 미니나사의 표면특성과 전기화학적 거동 (Surface Characteristics and Electrochemical Behaviors of TiN and ZrN Coated Orthodontic Mini-screw)

  • 김신영;문영필;박근형;조호형;김원기;손미경;최한철
    • 한국표면공학회지
    • /
    • 제41권5호
    • /
    • pp.232-239
    • /
    • 2008
  • The dental orthodontic mini-screw requires good mechanical properties and high corrosion resistance for implantation in the bone. The purpose of this study was to investigate the electrochemical characteristics of TiN and ZrN coated orthodontic mini-screws, mini-screws were used for experiment. Ion plating was carried out for mini-screw using Ti and Zr coating materials with nitrogen gas. Ion plated surface of each specimen w as o bserved with f ield emission scanning e lectron microscopy ( FE-SEM), e nergy dispersive x-ray spectroscopy (EDX), and electrochemical tester. The surface of TiN and ZrN coated mini-screw were more smooth than that of other kinds of non-coated mini-screw due to dercrease of machined defects. The corrosion current density of the TiN and ZrN coated mini-screw decreased compared to non-coated sample. The corrosion potential of TiN and ZrN coated mini-screw were higher than that of non-coated mini-screw in 0.9% NaCl solution. The pitting corrosion resistance increased in the order of ZrN coated, TiN coated and non-coated wire. Pitting potential of ZrN coated mini-screw was the highest in the other specimens.

태음인(太陰人) 가미조위탕(加味調胃湯)의 HPLC 분석 (HPLC Analysis of Marker Substances in Taeumin Gamijowi-tang)

  • 황영명;유영법;김종열;고병희;이의주
    • 사상체질의학회지
    • /
    • 제18권1호
    • /
    • pp.147-154
    • /
    • 2006
  • 1. Objectives This study was aimed to evaluate marker substances in Gamijowi-tang by high performance liquid chromatography(HPLC) 2. Methods The seperation was performed an AquasilC18(4.6X250mm)column by gradient elution with 0.1N H3PO4 in H2O - acetonitrile(0min 100:10,20min60:40, 40min 80:20, 60min 100:0) as the mobile phase at a flow-rate of 1.0 ml/min with detection at 190-800nm 3. Results Ephedrine and schizandrin were established as marker substances in Gamijowi-tang and its qualitative analysis was carried out. Analyzed was similarity of marker substances between in standard article and in Gamijowi-tang. The result of the analysis was that ephedrine and schizadrin showed 0.9999 of similarity, which meant they were really ephedrine and schizadrin. In addition, ephedrin content was 12.16mg, pseudoephedrine conrenr was 5.09mg, and schizandrin content was 26.6mg in 76g of Gamijowi-tang. 4. Conclusions Qualitative and quantitative analyses of ephedrine and schizandrin in Gamijowi-tang were conducted, and it was identified thar they could be used as marker substances in standardizing quality of Gamijowi-rang.

  • PDF