• 공업화학
• /
• 제3권1호
• /
• pp.53-63
• /
• 1992

프로필렌을 선택산화시켜 아크로레인을 제조하는 반응을 Bi-molybdate 촉매상에서 고정층 반응기를 사용하여 연구하였다. ${\alpha}-Bi_2Mo_3O_{12}$위에 $MoO_3$를 담지시킨 M/BM-series 촉매는 함침법으로 제조되었고, 역으로 BM/M-series 촉매는 $MoO_3$위에 ${\alpha}-Bi_2Mo_3O_{12}$을 침전시켜 제조하였다. 또한 촉매의 특성분석을 위하여 질소흡착과 XRD, SEM을 이용하였다. M/BM-series 촉매에서는 $MoO_3$가 작은 입자로 분산되고 ${\alpha}-Bi_2Mo_3O_{12}$의 결정구조는 $MoO_3$상이 추가되어도 그 형상이 변하지 않는 채로 유지되었으나, BM/M-series 촉매의 표면형상 및 전체 구조는 촉매제조 중에 생기는 침전물인 $Bi(OH)_3$가 소성 도중 $MoO_3$와 반응하여 ${\alpha}-Bi_2Mo_3O_{12}$을 형성하는 관계로 그 조성에 따라 매우 불규칙적으로 변화하였다. 반응실험 결과, 두 종류의 촉매 모두에서 excess $MoO_3$가 포함되었을 때 활성이 크게 증가하였는데, 이는 선별산화반응이 주로 ${\alpha}-Bi_2Mo_3O_{12}$에서 일어나고 $MoO_3$는 ${\alpha}-Bi_2Mo_3O_{12}$에 산소 공급을 원활히 하여 활성을 증가시키기 때문으로 판명되었다. 또한 이러한 활성 증가는 ${\alpha}-Bi_2Mo_3O_{12}$와 기계적 혼합물 (mechanical mixture)에서도 관찰되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.58-58
• /
• 1999

The diamond films which can be applied to SOD (silicon-on-diamond) structure were deposited on Si(100) substrate using CO/H2 CH4/H2 source gases by microwave plasma chemical vapor deposition(MPCVD), and SOD structure have been fabricated by poly-silicon film deposited on the diamond/Si(100) structure y low pressure chemical vapor deposition(LPCVD). The phase of the diamond film, surface morpholog, and diamond/Si(100) interface were confirmed by X-ray diffraction(XRD), scanning electron microscopy(SEM), atomic force microscopy(AFM), and Raman spectroscopy. The dielectric constant, leakage current and resistivity as a function of temperature in films are investigated by C-V and I-V characteristics and four-point probe method. The high quality diamond films without amorphous carbon and non-diamond elements were formed on a Si(100), which could be obtained by CO/H2 and CH4/H2 concentration ratio of 15.3% and 1.5%, respectively. The (111) plane of diamond films was preferentially grown on the Si(100) substrate. The grain size of the films deposited by CO/H2 are gradually increased from 26nm to 36 nm as deposition times increased. The well developed cubo-octahedron 100 structure nd triangle shape 111 are mixed together and make smooth and even film surface. The surface roughness of the diamond films deposited by under the condition of CO/H2 and CH4/H2 concentration ratio of 15.3% and 1.5% were 1.86nm and 3.7 nm, respectively, and the diamond/Si(100) interface was uniform resistivity of the films deposited by CO/H2 concentration ratio of 15.3% are obtained 5.3, 1$\times$10-9 A/cm, 1 MV/cm2, and 7.2$\times$106 $\Omega$cm, respectively. In the case of the films deposited by CH4/H2 resistivity are 5.8, 1$\times$10-9 A/cm, 1 MV/cm, and 8.5$\times$106 $\Omega$cm, respectively. In this study, it is known that the diamond films deposited by using CO/H2 gas mixture as a carbon source are better thane these of CH4/H2 one.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.49-49
• /
• 2009

최근 범세계적인 그린에너지 정책에 관련해 화석연료를 대체할 수 있는 수소, 풍력, 태양광 등의 대체 에너지에 대한 관심이 고조되고 있다. 이러한 여러 대체에너지 중에서도 태양광을 전기에너지로 변환하는 태양전지에 관한 연구가 집중되고 있다. 태양전지는 구조적으로 단순하고 제조 공정도 비교적 간단하지만, 보다 널리 보급되기 위해서는 경제성 향상이라는 문제점을 해결해야 한다. 이를 위해서는 기존의 실리콘 태양전지를 대체할 수 있는 신물질에 대한 연구가 필요하며, 그 중에서도 반도체 기술을 이용한 박막형 태양전지는 기존의 실리콘 태양 전지가 가지고 있는 고비용이라는 문제점을 극복할 수 있을 것으로 기대를 모으고 있다. 박막형 태양전지의 박막 재료로는 CIGS, CdTe 등이 연구되어지고 있지만, 아직까지는 기존의 실리콘 태양전지에 비해 에너지변환효율이 낮은 이유로 인해 실용화가 많이 이루어지지 못하고 있는 것이 사실이다. 이러한 박막형 태양전지의 재료들 중에서도 CdTe는 이종접합 박막형 태양전지에 흡광층으로 사용되는 것으로 상온에서 1.45eV 정도의 밴드갭(band gap) 에너지를 갖는 II-VI족 화합물반도체로써 태양광 스펙트럼과 잘 맞는 이상적인 밴드랩 에너지와 높은 광흡수도 때문에 박막형 태양전지로 가장 주목을 받고 있다. CdTe 박막의 제조 방법으로는 진공증착법(vacuum evaporation), 전착법(electrodeposition), 스퍼터링법(sputtering) 등이 있지만 본 연구에서는 스퍼터링법을 이용하여 박막을 증착하였다. 이상과 같이 증착된 CdTe 박막을 화학적기계적연마(CMP, chemical mechanical polishing) 공정을 적용시킴으로써, 태양전지의 에너지변환효율에 직접적인 영향을 끼칠 수 있는 CdTe 박막의 물리적, 전기적 특성들의 변화를 연구하기 위한 선행 연구를 진행하였다. 특히 본 연구에서는 CdTe 박막의 화학적 기계적 연마 특성을 분석하여 정규화를 통한 모델링을 수행하였다. 또한 화학적기계적연마 공정 전과 후의 표면 특성을 관찰하기 위해 SEM(scanning electron microscopy)과 AFM(atomic forced microscope)를 이용하였으며, 구조적 특성 관찰을 XRD(X-ray diffraction)를 사용하여 실험을 수행하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권6호
• /
• pp.61-69
• /
• 2000

Indium-Tin Oxide (ITO) films were prepared on the commercial glass substrate by the Magnetron Sputtering method. The target was a 90wt.% $In_2O_3$-10wt.% $SnO_2$with 99.99% purity. The ITO films deposited by changing the partial pressure of oxygen gas ($O_2$/(Ar+$O_2$)) of 2, 3 and 5% as well as by changing the substrate temperature of $300^{\circ}C$ or $500^{\circ}C$. The influence of substrate pre-annealing and pre-cleaning on the quality of ITO film were examined, in which the substrate temperature was $500^{\circ}C$ and oxygen partial pressure was 3%. The characteristics of films were examined by the 4-point probe, Hall effect measurement system, SEM, AFM, Spectrophotometer, and X-ray diffraction. The optimum ITO films have been obtained when the substrate temperature is $500^{\circ}C$ and oxygen partial pressure is 3%. At optimum condition, the film showed transmittance of 81%, sheet resistivity of $226\Omegatextrm{cm}^2$, resistivity($\rho$) of $5.4\times10^{-3}\Omega$cm, carrier concentration of $1.0\times10^{19}cm^{-3}$, and carrier mobility of $150textrm{cm}^2$Vsec. From XRD spectrum, c(222) plane was dominant in the case of substrate temperature at $300^{\circ}C$, without regarding to oxygen partial pressure. However, in the case of substrate temperature at $500^{\circ}C$, c(400) plane was grown together with c(222) plane, only for oxygen partial pressure of 2 and 3%. In both case of chemical and ultrasonic cleaning without pre-annealing the substrate, it showed much almost same sheet resistivity, resistivity($\rho$), transmittance, carrier concentration, and carrier mobility. In case of $500^{\circ}C$/60min pre-annealing before ITO film deposited, both transimittance and carrier mobility are better than no pre-annealing, because pre-annealing is supposed to remove alkari ions diffusion from substrate. ITO film deposited on the Corning 0080 sybstrate showed a little bit better sheet resistivity, resistivity($\rho$), transimittance, carrier concentration than the film deposited on commercial glass. But no differences between Corning substrate and pre-annealed commercial glass substrate are found.

• 한국진공학회지
• /
• 제17권1호
• /
• pp.28-33
• /
• 2008

R.F 마그네트론 스퍼터링 방법을 이용하여 Indium tin oxide(ITO)가 증착된 유리기판 위에 PLZT ($Pb_{1.1}La_{0.08}Zr_{0.65}Ti_{0.35}O_3$) 박막을 제작하였다. 기판온도를 $500^{\circ}C$로 고정하여 증착한 후 급속열처리 방법으로 다양한 온도 ($550-750^{\circ}C$)에서 후열처리 하였다. 후열처리온도의 변화에 따른 PLZT 박막의 결정학적 특성을 X선 회절법을 통하여 분석하였고 원자간력 현미경을 이용하여 박막의 표면 상태를 관찰하였다. 또한 precision material analyzer 을 이용하여 분극이력곡선과 피로특성을 측정하였다. 후 열처리 온도가 증가함에 따라 잔류분극 값(Pr)은 $10.6{\mu}C/cm^2$ 에서 $31.4{\mu}C/cm^2$로 증가하였으며 항전계(Ec)는 79.9 kV/cm에서 60.9 kV/cm로 감소하는 경향을 보였다. 또한 피로특성의 경우 1MHz 주파수에서 ${\pm}5V$의 square wave를 인가하여 측정한 결과 $700^{\circ}C$에서 후열처리한 시편의 경우 $10^9$회 이상의 분극반전을 거듭하였을 때 분극값이 15% 감소하는 결과를 나타내었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.463-463
• /
• 2014

Dye-sensitized solar cells (DSSCs) have generated a strong interest in the development of solid-state devices owing to their low cost and simple preparation procedures. Effort has been devoted to the study of electrolytes that allow light-to-electrical power conversion for DSSC applications. Several attempts have been made to substitute the liquid electrolyte in the original solar cells by using (2,2',7,7'-tetrakis (N,N-di-p-methoxyphenylamine)-9-9'-spirobi-fluorene (spiro-OMeTAD) that act as hole conductor [1]. Although efficiencies above 3% have been reached by several groups, here the major challenging is limited photoelectrode thickness ($2{\mu}m$), which is very low due to electron diffusion length (Ln) for spiro-OMeTAD ($4.4{\mu}m$) [2]. In principle, the $TiO_2$ layer can be thicker than had been thought previously. This has important implications for the design of high-efficiency solid-state DSSCs. In the present study, we have fabricated 3-D Transparent Conducting Oxide (TCO) by growing tin-doped indium oxide (ITO) nanowire (NWs) arrays via a vapor transport method [3] and mesoporous $TiO_2$ nanoparticle (NP)-based photoelectrodes were prepared using doctor blade method. Finally optimized light-harvesting solid-state DSSCs is made using 3-D TCO where electron life time is controlled the recombination rate through fast charge collection and also ITO NWs length can be controlled in the range of over $2{\mu}m$ and has been characterized using field emission scanning electron microscopy (FE-SEM). Structural analyses by high-resolution transmission electron microscopy (HRTEM) and X-Ray diffraction (XRD) results reveal that the ITO NWs formed single crystal oriented [100] direction. Also to compare the charge collection properties of conventional NPs based solid-state DSSCs with ITO NWs based solid-state DSSCs, we have studied intensity modulated photovoltage spectroscopy (IMVS), intensity modulated photocurrent spectroscopy (IMPS) and transient open circuit voltages. As a result, above $4{\mu}m$ thick ITO NWs based photoelectrodes with Z907 dye shown the best performing device, exhibiting a short-circuit current density of 7.21 mA cm-2 under simulated solar emission of 100 mW cm-2 associated with an overall power conversion efficiency of 2.80 %. Finally, we achieved the efficiency of 7.5% by applying a CH3NH3PbI3 perovskite sensitizer.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.335-335
• /
• 2014

Over the past several years, transparent conducting oxides have been extensively studied in order to replace indium tin oxide (ITO). Here we report on fluorine doped zinc tin oxide (FZTO) films deposited on glass substrates by radio-frequency (RF) magnetron sputtering using a 30 wt% ZnO with 70 wt% SnO2 ceramic targets. The F-doping was carried out by introducing a mixed gas of pure Ar, CF4, and O2 forming gas into the sputtering chamber while sputtering ZTO target. Annealing temperature affects the structural, electrical and optical properties of FZTO thin films. All the as-deposited FZTO films grown at room temperature are found to be amorphous because of the immiscibility of SnO2 and ZnO. Even after the as-deposited FZTO films were annealed from $300{\sim}500^{\circ}C$, there were no significant changes. However, when the sample is annealed temperature up to $600^{\circ}C$, two distinct diffraction peaks appear in XRD spectra at $2{\Theta}=34.0^{\circ}$ and $52.02^{\circ}$, respectively, which correspond to the (101) and (211) planes of rutile phase SnO2. FZTO thin film annealed at $600^{\circ}C$ resulted in decrease of resistivity $5.47{\times}10^{-3}{\Omega}cm$, carrier concentration ~1019 cm-3, mobility~20 cm2 V-1s-1 and increase of optical band gap from 3.41 to 3.60 eV with increasing the annealing temperatures and well explained by Burstein-Moss effect. Change of work function with the annealing temperature was obtained by ultraviolet photoemission spectroscopy. The increase of annealing temperature leads to increase of work function from ${\phi}=3.80eV$ (as-deposited FZTO) to ${\phi}=4.10eV$ ($600^{\circ}C$ annealed FZTO) which are quite smaller than 4.62 eV for Al-ZnO and 4.74 eV for SnO2. Through X-ray photoelectron spectroscopy, incorporation of F atoms was found at around the binding energy of 684.28 eV in the as-deposited and annealed FZTO up to 400oC, but can't be observed in the annealed FZTO at 500oC. This result indicates that F atoms in FZTO films are loosely bound or probably located in the interstitial sites instead of substitutional sites and thus easily diffused into the vacuum from the films by thermal annealing. The optical transmittance of FZTO films was higher than 80% in all specimens and 2-3% higher than ZTO films. FZTO is a possible potential transparent conducting oxide (TCO) alternative for application in optoelectronics.

• 한국광물학회지
• /
• 제30권2호
• /
• pp.71-81
• /
• 2017

회백색 응회암으로 구성된 경주 골굴암 마애불의 효과적인 보존처리를 위하여 구성암석의 특징과 보존처리제 적용에 따른 효과를 살펴보았다. 구성암석은 팽윤성 광물인 몬모릴로나이트를 3-5% 함유하고 있으며, 물과 반응 후 팽윤성 광물의 층간간격이 증가함을 보였다(1.54-2.69%). 에틸실리케이트 암석강화제를 적용한 후 시편의 표면 경도, 흡수율, 공극률 등의 물성은 향상되었으나 팽윤성 광물의 층간간격이 감소하였으며(4.23-12.12%), 팽윤성 광물의 함량이 많을수록 그 정도는 컸다. 팽윤저지제를 선 처리한 후 강화제를 적용하였을 때 물성은 강화제만을 처리하였을 때와 거의 유사한 결과를 보였다. 팽윤저지제만의 처리로는 팽윤성 광물의 층간간격이 거의 변화되지 않았으며, 팽윤저지제 처리 후 강화제를 처리하였을 때는 XRD 패턴에서 팽윤성 광물의 세기는 줄어들었으나 층간간격의 변화는 강화제만을 처리하였을 때와 유사하여 팽윤저지제의 효과는 거의 없었다(4.10-11.85%). 따라서 팽윤성 광물을 함유하고 있는 골굴암 마애불 구성암석을 강화시키기 위한 보존처리제로서 에틸실리케이트 계열의 암석강화제는 적절치 않으며 이를 보완하기 위해 사용한 팽윤저지제도 효과적이지 못하다. 우수의 접촉으로 구성광물이 팽윤되어 풍화가 급속히 진행되기 때문에 현재로서는 하부와 측면 등 풍화가 심한 부분에 우수접촉을 저지시키는 조치가 필요하다.

• 한국표면공학회지
• /
• 제47권1호
• /
• pp.39-47
• /
• 2014

The peculiar feature of cathodic protection in seawater has the capability to form mineral calcareous deposits such as magnesium and calcium on metal surfaces. It is assumed that $OH^-$ ions are generated close to the metal surface as a result of cathodic protection and generated $OH^-$ ions increases the pH of the metal/seawater interface outlined as the following formulae. (1) $O_2+2H_2O+4e{\rightarrow}4OH^-$, or (2) $2H_2O+2e{\rightarrow}H_2+2OH^-$. And high pH causes precipitation of $Mg(OH)_2$ and $CaCO_3$ in accordance with the following formulae. (1) $Mg^{2+}+2OH^-{\rightarrow}Mg(OH)_2$, (2) $Ca^{2+}+CO{_3}^{2-}{\rightarrow}CaCO_3$. The focus of this study was to increase the amount of $CO{_3}^{2-}$ with the injection of $CO_2$ gas to the solution for accelerating process of the following formulae. (1) $H_2O+CO_2{\rightarrow}H_2CO_3$, (2) $HCO^{3-}{\rightarrow}{H^+}+CO{_3}^{2-}$. Electrodeposit films were formed by an electro-deposition technique on steel substrates in solutions of both natural seawater and natural seawater dissolved $CO_2$ gas with different current densities, over different time periods. The contents of films were investigated by scanning electron microscopy(SEM) and X-ray diffraction(XRD). The adhesion and corrosion resistance of the coating films were evaluated by anodic polarization. From an experimental result, only $CaCO_3$ were found in solution where injected $CO_2$ gas regardless of current density. In case of injecting the $CO_2$ gas, weight gain of electrodeposits films hugely increased and it had appropriate physical properties.

• 한국분말재료학회지
• /
• 제24권6호
• /
• pp.437-443
• /
• 2017

SiC-based composite materials with light weight, high durability, and high-temperature stability have been actively studied for use in aerospace and defense applications. Moreover, environmental barrier coating (EBC) technologies using oxide-based ceramic materials have been studied to prevent chemical deterioration at a high temperature of $1300^{\circ}C$ or higher. In this study, an ytterbium silicate material, which has recently been actively studied as an environmental barrier coating because of its high-temperature chemical stability, is fabricated on a sintered SiC substrate. $Yb_2O_3$ and $SiO_2$ are used as the raw starting materials to form ytterbium disilicate ($Yb_2Si_2O_7$). Suspension plasma spraying is applied as the coating method. The effect of the mixing method on the particle size and distribution, which affect the coating formation behavior, is investigated using a scanning electron microscope (SEM), an energy dispersive spectrometer (EDS), and X-ray diffraction (XRD) analysis. It is found that the originally designed compounds are not effectively formed because of the refinement and vaporization of the raw material particles, i.e., $SiO_2$, and the formation of a porous coating structure. By changing the coating parameters such as the deposition distance, it is found that a denser coating structure can be formed at a closer deposition distance.