• Journal of the Korea Safety Management & Science
• /
• v.15 no.3
• /
• pp.1-6
• /
• 2013

This study was conducted to compare the value of the working environment measurement with the expected exposure value drawn by using a program, thereby going to investigate whether it is available to the risk assessment of domestic workplace. We used the ECETOC TRA program which is one of the exposure predictive models. Four kinds of substances were measured in two workplace which was exposed to organic solvents and one kind of substance was measured in three workplace which was exposed to dusts and then an exposure assessment of chemical risk factors was conducted. The result value of the working environment measurement, solid substance exceeded standard in one site, and it was found that the other solid and liquid substances were within the standard. The value of the exposure assessment program showd the same result; it was higher than the value of the working environment measurement, suggesting that due to its nature, the exposure assessment program is run only on the worst situation. Therefore, it was found that when the exposure assesment program is used, variables should be substituted only after accurately assessing the workplace and it is a good idea to assess the risk beforehand with the exposure assessment program in the case of the workplace which employs no more than 5 people and where it is hard to assess the working environment.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.22 no.3
• /
• pp.191-199
• /
• 2012

Objectives: The study aim was to evaluate the application of a chemical exposure assessment tool for the Korean workplace. The Ministry of Employment and Labor in Korea (KMOEL) introduced the need for workplace risk assessments in 2011, requiring the Korean chemical industry to consider both domestic and international chemical regulation policies (e.g., estimations of exposure scenarios). Exposure scenarios are required in the European Union as part of material safety data sheets (MSDS) under the Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH) system. Methods: Although many programs for the estimation of exposure have been developed worldwide, to date there is no standard for the Korean workplace. To develop programs suitable for the Korean workplace, we examined the applicability of the European Center for Ecotoxicology and Toxicology of Chemicals target risk assessment (ECETOC TRA), which is recommended by the European Chemical Agency (ECHA). Results: To investigate the applicability of the ECETOC TRA to Korean industry, this study simulated 15 industrial processes. The predicted respiratory exposures for four processes using origin input parameters were underestimated compared to the measured respiratory exposure. Using calibrated input parameters, results for two processes were underestimated compared to the measured respiratory exposure. This result suggests that the use of calibrated input parameters reduces the differences between predicted and measured respiratory exposure. Conclusions: we developed applicable exposure estimating method by modifying the ECETOC TRA program; one suggested the development of exposure estimating program that explains Korea domestic workplace exposure scenario.This study will support the introduction of exposure scenario in MSDS system and protect health of worker from hazardous chemical.

• Journal of Environmental Health Sciences
• /
• v.42 no.6
• /
• pp.419-429
• /
• 2016

Objectives: According to the new Chemical Control Act from the Korean Ministry of Environment (2014-259), workers handling hazardous chemicals should wear personal protective equipment (PPE). However the act simply states in basic phrases that every worker handling one or more of the 69 listed chemicals should wear PPE and does not consider the unique hazard characteristics of chemicals and work types. The main purpose of this study is to provide basic data to revise the act to suit particular work processes and situations. Methods: The hazard rank of the substances was classified based on hazardous characteristics such as LC50 and vapor pressure using matrix analysis. The workplace exposure risk of the substances was also determined through a matrix analysis based on the previously determined hazard ranks and the demands of manual handling together with the likelihood of accident frequency of the operation combined with the exposure of workers during spill accidents. Results: To meet the demands for developing subsequent guidelines for the risk-based application of PPE in hazardous workplaces, this study sorted the 69 listed chemicals into five hazardous categories based on their LC50 and vapor pressures, and also assigned exposure categories according to exposure vulnerability for various types of work which are frequently performed throughout the life cycle of the chemicals. Conclusion: In the next study, an exposure risk matrix will be produced using the hazard rank of chemicals and workplace exposure risk, and then PPE will be selected to suit the categories of the exposure risk matrix.

• Safety and Health at Work
• /
• v.10 no.2
• /
• pp.141-150
• /
• 2019

Background: Evidence on associations between occupational diesel exhaust and gasoline exposure and colorectal cancer is limited. We aimed to assess the effect of workplace exposure to diesel exhaust and gasoline on the risk of colorectal cancer. Methods: This case-control study included 181,709 colon cancer and 109,227 rectal cancer cases diagnosed between 1961 and 2005 in Finland, Iceland, Norway, and Sweden. Cases and controls were identified from the Nordic Occupational Cancer Study cohort and matched for country, birth year, and sex. Diesel exhaust and gasoline exposure values were assigned by country-specific job-exposure matrices. Odds ratios and 95% confidence intervals were calculated by using conditional logistic regression models. The results were adjusted for physical strain at work and occupational exposure to benzene, formaldehyde, ionizing radiation, chlorinated hydrocarbons, chromium, and wood dust. Results: Diesel exhaust exposure was associated with a small increase in the risk of rectal cancer (odds ratio - 1.05, 95% confidence interval 1.02-1.08). Gasoline exposure was not associated with colorectal cancer risk. Conclusion: This study showed a small risk increase for rectal cancer after workplace diesel exhaust exposure. However, this finding could be due to chance, given the limitations of the study.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.17
• /
• pp.7407-7411
• /
• 2014

The incidence of urban female breast cancer has been continuously increasing over the past decade with unknown etiology. One hypothesis for this increase is carcinogen exposure from tobacco. Therefore, the objective of this study was to investigate the risk of urban female breast cancer from tobacco smoke exposure. The matched case control study was conducted among Thai females, aged 17-76 years and living in Bangkok or its surrounding areas. A total of 444 pairs of cases and controls were recruited from the Thai National Cancer Institute. Cases were newly diagnosed and histologically confirmed as breast cancer while controls were selected from healthy women who visited a patient, matched by age ${\pm}5$ years. After obtaining informed consent, tobacco smoke exposure data and information on other potential risk factors were collected by interview. The analysis was performed by conditional logistic regression, and presented with odds ratio (ORs) and 95% confidence intervals(CI). From all subjects, 3.8% of cases and 3.4% of controls were active smokers while 11.0% of cases and 6.1% of controls were passive smokers. The highest to lowest sources of passive tobacco smoke were from spouses (40.8%), the workplace (36.8%) and public areas (26.3%), respectively. After adjusting for other potential risk factors or confounders, females with frequent low-dose passive smoke exposure (${\leq}7$ hours per week) from a spouse or workplace had adjusted odds ratio 3.77 (95%CI=1.11-12.82) and 4.02 (95%CI=1.04-15.50) higher risk of breast cancer compared with non-smokers, respectively. However, this study did not find any association of breast cancer risk in high dose passive tobacco smoke exposure, or a dose response relationship in cumulative passive tobacco smoke exposure per week, or in the active smoker group. In conclusion, passive smoke exposure may be one important risk factor of urban female breast cancer, particularly, from a spouse or workplace. This risk factor highlights the importance of avoiding tobacco smoke exposure as a key measure for breast cancer prevention and control.

• Safety and Health at Work
• /
• v.15 no.1
• /
• pp.96-101
• /
• 2024

Background: Silicosis among workers who fabricate engineered stone products in micro or small-sized enterprises (MSEs) was reported from several countries. Workplace exposure data of these workers at high risk of exposure to respirable crystalline silica (RCS) dust are limited. Methods: We surveyed workers performing cutting, shaping and polishing tasks at 6 engineered stone fabricating MSEs in Sydney, Australia prior to regulatory intervention. Personal exposure to airborne RCS dust in 34 workers was measured, work practices were observed using a checklist and worker demography recorded. Results: Personal respirable dust measurements showed exposures above the Australian workplace exposure standard (WES) of 0.1 mg/m³ TWA-8 hours for RCS in 85% of workers who performed dry tasks and amongst 71% using water-fed tools. Dust exposure controls were inadequate with ineffective ventilation and inappropriate respiratory protection. All 34 workers sampled were identified as overseas-born migrants, mostly from three linguistic groups. Conclusions: Workplace exposure data from this survey showed that workers in engineered stone fabricating MSEs were exposed to RCS dust levels which may be associated with a high risk of developing silicosis. The survey findings were useful to inform a comprehensive regulatory intervention program involving diverse hazard communication tools and enforcing improved exposure controls. We conclude that modest occupational hygiene surveys in MSEs, with attention to workers' demographic factors can influence the effectiveness of intervention programs. Occupational health practitioners should address these potential determinants of hazardous exposures in their workplace surveys to prevent illness such as silicosis in vulnerable workers.

• Journal of Environmental Health Sciences
• /
• v.36 no.5
• /
• pp.391-401
• /
• 2010

A reduction in risk of occupational exposure to chemical hazards within the workplace has been the focus of attention both through industry initiatives and legislation. The aims of this study were to develop an exposure matrix by industry and process, and to apply this matrix to control the risk of occupational exposure to Dichloromethane (DCM). The exposure matrix is a tool to convert information on industry and process into information on occupational risk. The exposure matrix comprised industries and processes involving DCM, based on an exposure database provided by KOSHA (the Korean Occupational Safety and Health Agency), which was gathered from a workplace hazards evaluation program in Korea. The risk assessment of the exposure matrix was performed using Hallmark risk assessment tool. The results of the risk assessment were indicated by a Danger Value (DV) calculated from the combination of hazard rating (HR), duration of use rating (DUR), and risk probability rating (RPR) of exposure to the chemical, and were divided into four control bands which were related to control measures. The applicability of the risk assessment of the exposure matrix was evaluated by a field study, and survey of the employees of the exposure matrix groups. Among 45 industries examined, this study found that greater attention should be paid to two industries: the manufacture of other optical instruments and photographic equipment, and the manufacture of printing ink, and to one process among 47 examined, the packing process in the manufacture of printing ink, because these were regarded as carrying the highest risk. This tool of a risk assessment for the exposure matrix can be applied as a general exposure information system for hazard control, risk quantification, setting the occupational exposure limit, and hazard surveillance. The exposure matrix includes workforce data, and it provides information on the numbers of exposed workers in Korea by agent, occupation, and level of exposure and risk.

• Safety and Health at Work
• /
• v.12 no.4
• /
• pp.471-478
• /
• 2021

Background: Employment standards (ES) include having a regular payday, regular breaks, the right to paid sick or vacation time, and paid wages. Inadequate ES contribute to the labour market vulnerability of workers; however, they are not typically considered to be risk factors for workplace injury. In a sample of Canadian workers, we examine the risk of injury associated with inadequate ES, independent of, and combined with inadequate workplace protections from workplace hazards. Methods: Data from 2,803 adults working 15 hours or more/week in workplaces with at least five employees were analysed. We explored associations between exposure to workplace hazards with inadequate protections [termed occupational health and safety (OHS) vulnerability] and inadequate ES on workplace injury (physical or mental injury; injury requiring time off). Additive interaction models were used to examine the independent and combined effects of these exposures. Results: Occupational health and safety vulnerability and inadequate ES were independently associated with increased injury outcomes. Adjusted models showed an additive relationship for all injury outcomes between OHS vulnerability and inadequate ES. Statistically significant superadditive relationships were observed for physical injury risk with policy and procedure vulnerability plus inadequate ES [synergy index (S) 1.50, 95% CI: 1.13-2.00] and for overall OHS vulnerability plus inadequate ES (S 1.53, 95% CI: 1.16-2.02), suggesting a combined effect greater than independent effects. Conclusion: Occupational health and safety vulnerability and inadequate ES are independently associated with workplace injury. For certain injury outcomes, the combined effect of OHS vulnerability and inadequate ES is greater than the independent effects of each individual exposure.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.2
• /
• pp.146-155
• /
• 2015

Objectives: The aims of this study were to set up benzene exposure matrices according to industry and process and to assess the risk of those occupational exposure to benzene. Methods: The benzene exposure matrices were assembled depending on industry and process, based on an exposure database provided by KOSHA(the Korean Occupational Safety and Health Agency), which was gathered from a workplace hazards evaluation program in Korea. These exposure matrices were assessed by Hallmark Risk Assessment tool. Results: The benzene was treated 412 industries sector(36%), 2,747 business places, and 471 industrial processes according to database. The arithmetic mean of past decade 8 hours time-weighted average of airborne benzene concentrations in the workplace was 0.10722 ppm. 1.07% of the total sample were greater than OEL, and 59.8% were showed less than the limit of detection. The highest risk values(Danger Value) were seen 36 industries including manufacture of general paints and similar product and 12 processes, such as other painting of manufacture of metal fabricated members. Exposure matrices based on employee exposure data base may provide exposure histories and can be used in epidemiological studies. Conclusions: It was found that more attentions should be paid to 36 among 412 industries and 12 of 471 processes, with a higher risk value.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.18 no.4
• /
• pp.303-309
• /
• 2008

The reduction of risk within the workplace has long been focus of attention both through industry initiatives and legislation. Exposure matrices according to industries and processes treated DMF (N,N-Dimethylformamide) were constructed based on KOSHA (Korean Occupational Safety and Health Agency)'s 2005 exposure database which were gathered from Korean agencies of workplace hazards evaluation for business place. These exposure matrices were assessed by danger value (DV) that was calculated from combination of hazard rating, duration of use rating, and risk probability rating of exposure to chemical hazardous agents in accordance with Hallmark Risk Assessment Tool. The results of risk assessment is divided four kinds of control bands which were related with control measures. The applicability of risk assessment using exposure matrices was performed by field study and survey for high matrices group. This study found that more attentions should be paid to two industries, manufacture of sewn wearing apparel and manufacture of textiles, among 19 industries, and to 3 processes, coating, processing & mixing, and lab, among 80 processes because those were regarded as having the highest risk.