• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.3
• /
• pp.325-334
• /
• 2011

Market Environment around water work industry is rapidly changing. ISO, International Organization for Standardization, announced the international water work service standard for comparison and evaluation between nations and businesses. And developed countries in water work are introducing market principle for growth of nation's water industry and reinforcement of its competitiveness. Also, some local governments entrusted their water utilities for improvement of competitiveness of water work. However, as some failure cases from overseas came out with emphasis, there are many refuting perspective about entrusted operation achievements of domestic water market. Hence, this paper evaluated competitiveness of domestic local water utilities from the perspective of productivity. After evaluating productivity using Malmquist productivity index, the authors compared and analyzed whether there is a difference of productivity between two different operating types by using Mann-Whitney test. As a result of analysis, it has shown that local water utilities achieved higher productivity at entrusted operation type rather than direct operation type. The local water utilities which chose entrusted operation had increased the productivity 13.9% on total factor productivity(TFP) during experimenting period, while the local water utilities which chose direct operation had increased 0.2%. The background of achieving this high productivity in entrusted operation was analyzed as a result of the higher technological effectiveness of a special water company. The result of this study can be referred when local government needs to decide on what operating types they will use.

• Asia pacific journal of information systems
• /
• v.9 no.3
• /
• pp.127-142
• /
• 1999

There have been strong arguments that the best organizational type for the information society is a network organization which is intelligent and learning-oriented as well as has problem solving capacities rather than a traditional passive organization which strictly follows standard operating procedures. In this perspective, integrated information work environment emerges as attractive work environment for the 21st century. Integrated information work environment is defined as an integrated electronic environment that is available to and readily accessible be each employee and is structured to provide immediate, individualized on-line access to the full range of information, software, guidance, advice and assistance, data, images, tools, and assessment and monitoring systems to permit job performance with minimal support and intervention by others. Case study was performed to measure the productivity improvement by implementing integrated information work environment in life insurance company. The results show that there is a number of indications of strong work productivity improvements.

• Journal of Fisheries and Marine Sciences Education
• /
• v.25 no.4
• /
• pp.998-1007
• /
• 2013

At container terminals, a major measurement of productivity can be work efficiency. For improving the productivity of container crane, the more efficient container yard operation method is necessary in container terminals. Recently, container terminal operators make an experiment on the dual cycle operation, which ship loading/unloading were carried out simultaneously, for increasing the productivity of container crane. In this paper, propose a system operating efficient dual cycle methods as utilize Ad-hoc technology in distributed port operation system. The dual cycle methods that proposed recognizes position information of Y/T during an action in Ad-hoc networks in case of container transfer works by real time as load an Ad-hoc module to Y/T taking charge of a container transfer with quay and yard. Utilize Ad-hoc networks technology in an operating system of container yard, and efficiently distributed processing done Y/T to container crane compare with operation systems of the existing dedicated method, and an improvement can do an operating system of an yard.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6D
• /
• pp.637-643
• /
• 2012

This research collected work drilling report of TBM method site developed by WRITH company to TBM equipment company in Germany and analyzed work operating productivity. Based Oil the data analyzed TBM operating productivity, This research derived and presented excavation speed (m/day) by TBM diameter (3.0m, 3.5m, 3.8m) and rock. Also, based on the excavation speed (m/day) by TBM diameter, This research estimated a day direct construction cost and total direct construction costs by applying a direct construction cost which spent on per 1m. When we perform a similar geological construction in the future, excavation speed and direct construction cost which were derived by TBM diameter and rock is thinking the effective utilization data to estimate construction cost and plan schedule management before the start of construction.

• Journal of Biosystems Engineering
• /
• v.39 no.2
• /
• pp.134-141
• /
• 2014

Purposes: This study was to validate the Robotic Smart Work System that can provides better working conditions and high productivity in unstructured environments like bio-industry, based on a tele-operation system for fruit harvesting with low cost 3-D positioning system on the laboratory level. Methods: For the Robotic Smart Work System for fruit harvesting and cultivation management in agriculture, a vision based tele-operating system and 3-D position information are key elements. This study proposed Robotic Smart Farming, an agricultural version of Robotic Smart Work System, and validated a 3-D position information system with a low cost omni camera and a laser marker system in the lab environment in order to get a vision based tele-operating system and 3-D position information. Results: The tasks like harvesting of the fixed target and cultivation management were accomplished even if there was a short time delay (30 ms ~ 100 ms). Although automatic conveyor works requiring accurate timing and positioning yield high productivity, the tele-operation with user's intuition will be more efficient in unstructured environments which require target selection and judgment. Conclusions: This system increased work efficiency and stability by considering ancillary intelligence as well as user's experience and knowhow. In addition, senior and female workers will operate the system easily because it can reduce labor and minimized user fatigue.

• Journal of the Society of Disaster Information
• /
• v.8 no.4
• /
• pp.319-327
• /
• 2012

This research collected work drilling report of TBM method site developed by WRITH company to TBM equipment company in Germany and analyzed work operating productivity. Based the data analyzed TBM operating productivity, This research derived and presented excavation speed(m/day) by TBM diameter (2.6m, 3.0m, 3.5m, 5.0m, 8.0m) and rock. Also, based on the excavation speed(m/day) by TBM diameter, This research estimated a day direct construction cost and total direct construction costs by applying a direct construction cost which spent on per 1m. Based on hard rock 40.0%, soft rock 30.0%, usually rock 20%, weathered rock 10.0%, TBM boring velocity, m per cost, total construction period shall estimate the construction cost and the construction period by the effective use by diameter when future applying TBM method to the basic planning stages and in the preliminary design phase.

• Journal of Korean Port Research
• /
• v.14 no.1
• /
• pp.13-26
• /
• 2000

In this paper, we compare and analyze the current state of the productivity of the stevedoring work among several container terminals in 1999. Based on these results of analysis, we firstly classify several factors which impede the efficient operations of container terminal as follows ; late arrival of container beyond cargo closing time(CCT), change of port of destination, change of vessel, and return cargo. Such factors are major cause for the cargo rehandling on terminals, thus deteriorate the overall performance of transfer crane during the stevedoring work. In order to improve the productivity of container terminal, we suggest that it is necessary for establishing and operating the efficient logistics management system. Especially, we emphasize the importance of information exchange on the scheduled cargoes among the relevant parties such as shippers, shipping companies, and terminal operators, which is the most effective way to alleviate the cargo rehandling.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1890-1891
• /
• 2007

This paper is aimed to handle quick work for all the workers and to improve the productivity by adding more effective content in Crane Monitoring System. The contributing proportion of the increase of port productivity is more increasing concerning not only the port industry, but also all the informations of container crane which is the representative equipment by the rapid increase of the volume of freight of port. The basic of rapid service is the improvement of the productivity, the information of operation as to the productivity of crane for the quick handling within yard and especially the informations of breakdown and to handle breakdown as soon as possible has a great effect on the increase of productivity.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.662-663
• /
• 2015

Despite the improvement of productivity and cost, the operating of such equipments yet has been recognized as a 3D business which is a low wage and poor working environment business field. Accordingly, the number of such operators has been decreasing by time. Especially, construction equipment demands higher controlling skills and occasionally involved in critical accidents. Therefore, this study aims to suggest a conceptual design for an construction equipment Around View Monitoring system that visually assists the operator for more efficient operating. It is expected that the application of such technology for a construction equipment highly improves the productivity and work quality, moreover, prevents disastrous accidents that occur to labors.

• The KIPS Transactions:PartD
• /
• v.10D no.1
• /
• pp.101-108
• /
• 2003

Construction of automated terminal it urgently demanded to gain the foundation of hub-port in north east Asia. Therefore we suggest an adequate operating system layout of automated terminal in Korea. In this paper the aim of automated terminal operating system is satisfied. four basic models are divided according to moving course of export and import cargo of each automated equipments, several input data are changed and analyzed dynamically by Trial and Error method, and then an optimized operating system model is selected, and designed for yard operating system layout on the basis of the selected model. Particularly, the productivity of automated port is up to the kind of automated equipments. However, because expense and present work process must be considered actually. In order to prevent confusion of the work, the method to optimize the present work and substitute prevent equipments and automated equipments was designed. It is a premise that ail the yard equipments described in this paper must be automatic except quay crane.