• Journal of Digital Convergence
• /
• v.14 no.3
• /
• pp.287-297
• /
• 2016

This research paper is of a 'mixed method' research design: the quantitative analysis covering general data and the current condition of male nurses, the qualitative analysis being used on interview transcript data. The research subjects are 19 male nurses who work at a hospital and 29 female nurses who are doing Masters degrees in "J" province of the Republic of Korea. The data collection period was March 25 to April 1, 2015. The quantitative data was analyzed with SPSS WIN 19.0 software while the qualitative data was analyzed according to the 'contents analysis' method. The results show that the satisfaction of male participants in their profession is higher than average. The item 'growth as a professional' was rated highest as a satisfying aspect of working as a nurse. A difference was observed in the points of view of male and female participants, however, both male and female nurses have a positive view of male nurses which over comes traditional stereotypes. These results will be used to establish a positive image of nurses across genders.

• Clean Technology
• /
• v.24 no.2
• /
• pp.99-104
• /
• 2018

In this work, we performed the methanation reaction using synthesis gas ($H_2/CO_2$) for the process to produce synthetic natural gas (SNG) for $4^{th}$ methanation reactor in SNG process proposed by RIST-IAE. Experimental conditions were changed with temperature, pressure and space velocity. At this time, $CO_2$ conversion, $CH_4$ selectivity and $H_2$ concentration after reaction were investigated. As a result, $CH_4$ selectivity by the $CO_2$ methanation increased with lower space velocity and higher pressure. On the other hand, in the case of temperature, the maximum value was shown at $320^{\circ}C$. From these results, it was found that the optimum condition of the fourth reactor suitable for the SNG process was obtained.

• Clean Technology
• /
• v.12 no.4
• /
• pp.232-237
• /
• 2006

The zinc-based desulfurization sorbents for a fluidized-bed system were prepared by a spray drying method and the effects of the pH and viscosity of the slurry on the attrition resistance of the prepared sorbents were investigated in this work. In order to improve the attrition resistance, alumina sol was used for an inorganic binder and pH of the slurry was changed for its better dispersion in slurry. The attrition resistance of the prepared sorbents decreased due to the phase transition of alumina sol to gel as the slurry pH increased to its basicity. The optimum pH condition for the good attrition resistance of the sorbents was about 6.0 in this study. It was confirmed that the attrition property of the sorbents were varied with the viscosity of the slurry. The attrition resistance of the sorbents prepared by the spray drying method increased as their bulk density increased, while it decreased as the surface area and porosity of the sorbents. The optimum viscosity for the high attrition was in the range 400-500 cP.

• Solar Energy
• /
• v.13 no.1
• /
• pp.22-30
• /
• 1993

This Paper deals with the experimental study of the axisymmetric air jet impinging vertically on the flat heating surface with and without swirl. The purpose of this study is to investigate the characteristics of flow, augmentation of heat transfer rate, turbulent intensity, and the comparison of heat transfer rate, the optimal swirling condition about the swirl and nonswirl axisymmetric air jet. In order to augment the heat transfer on the flat heating surface without introducing any additional power, the technique used in the present work was placement of twisted tape inserted pipe in front of the nozzle exit in order to make a swirl. The effect of swirl degree is investigated in case of S=0., 0.056, 0.111, 0.222 and the velocity of the jet was 14, 20, 26, 32, 38, 44m/s. The distance between the nozle exit and the stagnation point on the impinging plate was the H/D=$1{\sim}14$. In order to analyze of the flow structure which increase heat transfer, the velocity and the turbulent intensity of the axisymmetric jet was measured by a hot wire anemometer according to the swirl number and H/D.

• Journal of Life Science
• /
• v.17 no.1 s.81
• /
• pp.120-124
• /
• 2007

Fusarium proliferatum KGL0401 was previously isolated from Physalis alkekengi var. francheti plant roots and exhibited higher GA productivity than wild type Gibberella fujikuroi. The :tim of this work was to find out an optimal culture condition for GA production. Various carbon(fructose, glucose, lactose, maltose, sucrose) and nitrogen($KNO_3$, urea, glycine, $NaNO_3,\;NH_4Cl$) sources were used for this study. GAs activities were analysed by gas chromatography and mass spectrometry(GC-MS). The highest yield of $GA_3$ was found in the growth medium supplemented with sucrose as carbon source and $NH_4Cl$ as nitrogen source. The optimum carbon-nitrogen concentration for $GA_3$ production was found to be 0.5 M:0.17 M. Supernatant was prepared from the culture fluid of F. proliferatum KGL0401 cultured for 7 days at 3 0'E and the 10 ul supernatant was treated with 2 leaf-rice seedling.

• Microbiology and Biotechnology Letters
• /
• v.26 no.3
• /
• pp.195-199
• /
• 1998

AH alkalophilic Bacillus SP. AIk-7, isolated from soil, produced ethylene. The characteristics of this microorganism is the ability to grow well under the alkaline condition, at pH 10.3. This strain is similar to Bacillus alkalophilus in terms of morphological, physiological and biological characteristics. In observation of relationship of cell growth and ethylene production according to incubation times, the ethylene synthesis mostly occur from the late exponential phase to the death phase of growth. The purpose of this paper is to study the effects of various substrates on the biosynthesis of ethylene in the intact cell and the cell-free system by the Bacillus sp. AIk-7. In both intact cell and cell-free extract, optimum conditions for ethylene production was achieved at pH 10.3 and 3$0^{\circ}C$. Ethylene was effectively produced from L-Met and 1-aminocyclopropane-1-carboxylic acid (ACC). In this case, ACC as the substrate on ethylene production were two fold higher than L-met at each concentration of substrates. On the other hand, the cell-free ethylene-forming system was used as a tool for the elucidation of the biochemical reaction involved in the formation of ethylene by Bacillus sp. AIk-7. Ethylene production in the cell-free system required the presence of manganese and cobalt ion to be stimulated a little. The result obtained in this work suggests that L-met and ACC may be a precursor more directly related to bacterial ethylene production than any other substrates tested.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.3
• /
• pp.247-250
• /
• 1984

As a consecutive work on stability for the quality of ginseng products, the sorption properties of red ginseng (RG), red ginseng powder (RGP), and red ginseng powder tablet (RGPT) were studied in order to set the optimum moisture level for them. The levels of moisture at BET monolayer of RGP and RGPT ranged 5.97 to 7.27 % and 4.73 to 5.14 % in wet basis, respectively. Based on these values, the optimum moisture content for both of them would preferably be set at $6.7{\pm}0.7%$ and $4.9{\pm}0.2%$. From the results of storage study on microorganism growth under the maltreated condition, $40^{\circ}C$, and 75% RH, the optimum level of moisture for RG could be extended up to $14.0{\pm}0.5%$, which is much higher than the circulating values of 10.416%.

• Journal of the Korean Institute of Gas
• /
• v.17 no.3
• /
• pp.8-13
• /
• 2013

The purpose of this paper is to study for fire example by fuel leakage in LPG Vehicle. At first example, the car was repaired the fuel line that was connected with pressure hose between fuel regulator and injector in engine. But the service man was not very tighten with regular torque. At a result, the gas leaked on hot parts of engine. It verified the production of fire by engine heat. At second example, when the repair man, after replacement the injector, inserted the injector in a assembling part of it, he didn't the transform condition of fixing part. Therefore, the tearing phenomenon of O ring producted the controlled leakage of fuel by the injector deflection. It found the fact that the fuel leaked with gap of O ring. At third example. the fuel-cut solenoid valve was lined with pressure regulator unit. But the service man didn't throughly certify the leaked work of connected parts after repaired it. As a result, it certified the fire by engine heating leaked liquefied petroleum gas. Therefore it have to minimize the fire production that the driver should do no problem to throughly manage the fuel system.

• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.238-243
• /
• 2012

Laminaria roots have not been practically used in Korea. In this study, the extraction process of carbohydrates and minerals from Laminaria roots was investigated and the properties of extracted components were measured. Hydrochloric acid generally used in carbohydrate extraction from seaweeds in order to obtain high extraction yield. But in this work, to utilize extracted components as a functional food material, organic acids such as citric acid were used. Organic acid as extraction solvent has low extraction yield compared to strong acids. Therefore optimum condition for maximum yield was investigated in carbohydrate extraction from Laminaria roots using organic acid. We measured the extraction yields of carbohydrate with variation of extraction temperature, extraction time, concentration of organic acid and particle size of samples. The extraction yield increased as the particle size decreased and temperature became high. The extraction yield was 19.0 wt% after 4.0 hours extraction with 0.2 wt% citric acid at $100^{\circ}C$. Potassium concentration was high compared other minerals in extraction solution, that is, the ratio of K/Na was about 3.0. Fucoidan from Laminaria roots had same carbohydrate composition and lower molecular weight compared that of Undaria pinnatifida.

• Korean Chemical Engineering Research
• /
• v.46 no.4
• /
• pp.739-746
• /
• 2008

The aim of this study is finding the optimal design parameters and the optimal operation variables of a reactive distillation column. Different from steady state optimization, dynamic optimization makes it possible considering operation ability as well as design problems at process design step. For performing dynamic optimization, dynamic simulation should be done first. If dynamic simulation is already finished, dynamic optimization can be performed with less effort than that of dynamic simulation.Reactive distillation systems involving reaction and separation in a single unit have the potential to reduce capital and operating costs, particularly when reaction have conversion constraint or when azeotropes exist making conventional separation difficult and expensive. This study here present work on the continuous distillation process, the homogeneous catalyzed esterification of methanol and acetic acid, the synthesis of methyl acetate. Based on an equilibrium stage model of a reactive distillation column a dynamic optimization problem was formulated and solved. And the results were verified by performing dynamic simulation and showing the variation of conversion and purity as the variation of the operation variables. As the results of dynamic optimization, this study found optimal feed ratio, reflux ratio and reboiler duty of this system. And as this study applied it to dynamic simulations the dynamic characteristics of a reactive distillation column are showed under optimal operating condition.